Re: Restoring Rusty
4 Attachment(s)
using a paper towel in there because the metal is not flat its a bit convex
and then we let it set, we wait, and we wait |
Re: Restoring Rusty
That's it for today, wondering if I should move this contraption in the garage for the night, or not mess with it and leave it outside over night - gonna be 56*F tonight - but shoot rain tomorrow
|
Re: Restoring Rusty
Yessir the seat bolted right in.
|
Re: Restoring Rusty
Cant wait to see more of this .
|
Re: Restoring Rusty
5 Attachment(s)
Quote:
|
Re: Restoring Rusty - JB Welding The Dash Cover
5 Attachment(s)
and the bandages come off
|
Re: Restoring Rusty
5 Attachment(s)
lots of silly pics of lots of silly holes
|
Re: Restoring Rusty
5 Attachment(s)
so it took 6 hours to set and 24 hours to cure, so I removed the C clamps and magnets after 24 hours - trust me the waiting was the hardest part, going to bondo the holes next, maybe tomorrow
here is the belly |
Re: Restoring Rusty
Can't wait!
|
Re: Restoring Rusty
Don't bondo them... Just use more JB weld and it will cure like metal and look 100x once you've sanded it all down good.
|
Re: Restoring Rusty
Quote:
Bondo will crack at the parting line with the holes. Lab Metal or JB Weld epoxy will not. |
Re: Restoring Rusty
Looks great. Cannot wait to see the final product. Been wondering what to do with my dash so you may have just provided the answer.
|
Re: Restoring Rusty
I might have to try this on Clarence (my 74 stepper) someday if I dont sell him off.
|
Re: Restoring Rusty
Look's good any updates ?
|
Re: Restoring Rusty
2 Attachment(s)
Gregski, you inspired me! Picked up a donor bed today. I will be using the base, front and wheel wells. My original looks like it was used to haul loose cannon balls. Sorry, about the upside down pics.
|
Re: Restoring Rusty
2 Attachment(s)
thanks, man you were giving me virtigo - ha ha
|
Re: Restoring Rusty
Quote:
Daughter Knows How To Get Dads Attention |
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
Family first
|
Re: Restoring Rusty
2 Attachment(s)
so couple of weeks ago I got one of these $20 bucks off Rewards for being a ToolKit member at our local Pick n Pull junkyards
What to spend it on? |
Re: Restoring Rusty - Side Mirrors
4 Attachment(s)
Well I've been thinking about replacing my perfectly good chrome side mirrors with some black rectangular ones, now I appreciate chromes durability, but I aint no fan of shinny things on my truck, you know what they say, chrome won't get you home but black will get you back...
and so we found ourselves this beautiful 1986 Dodge Ram 50 and stripped its ears off |
Re: Restoring Rusty
2 Attachment(s)
not bad for $10 bucks with that coupon discount
|
Re: Restoring Rusty
2 Attachment(s)
here's how the two mirrors compare
|
Re: Restoring Rusty
3 Attachment(s)
we came home after work and just had to try them on for size, the holes are close but off by about 1/4 inch
|
Re: Restoring Rusty
3 Attachment(s)
we mounted one mirror with one screw for mock up, what do you all think?
|
Re: Restoring Rusty
1) Do your wing windows work?
2) Can you actually see out of those? I often found even the dumbo mirrors could block the view at times. Those look even smaller and to close to the doors. |
Re: Restoring Rusty
Different but I don't think they look right.
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
The dumbo mirror's don't get much love but it's still a big mirror with decent view and "correct". You can get a white set and paint them to match.
|
Re: Restoring Rusty
2 Attachment(s)
Quote:
So we hit O'Really's and picked up a jumbo tube of the stuff, $20 bucks for the 5 oz tubes instead of the little 1 oz tubes |
Re: Restoring Rusty
5 Attachment(s)
after changing into some work clothes we threw the dash on our [ahem] mobile work bench and mixed the white stuff with the black stuff 50 fifty like the recipie tells us to
now I must say, this stuff was difficult to work with, I don't know if I did something wrong but the goop was runny, not like water, but slowly shifting, it got to the point where I couldn't work on the dash in the vertical position but had to lay it horizontally or the goop would glide away now as I type this post, I recall AutoZone had the fast drying type aka the J-B Kwik (dries in 6 minutes), but I thought who the heck needs that, I got time, ha ha |
Re: Restoring Rusty
2 Attachment(s)
i know the rule of body work is the less bondo you use the less you'll have to sand, but at this point I didn't care how much I would have to sand, I just wanted those stupid round holes to disappear - know what I'm sayin
I was beginning to wonder if 65* F maybe was too cold to applicate this product, I don't know, seemed warm enuff just showing you how much goop we had left, this may be a two step process, goop some on, sand it off, goop some more on until the holes are completely full and then sand it off again |
Re: Restoring Rusty
You need to treat JB Weld just like bondo.
The dark stuff is essentially the metal part and the white stuff is the catalyst. Depending on how fast you want it to set you can add more or less white stuff. Who much white will make it harden too fast though. |
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
I love the stuff. Runny initially, but it starts thickening pretty quick, and you can manipulate it all the way to where it is like clay. It will run though if left "other than horizontal" even when it is pretty thick. If you have the hole you are filling horizontal, and you put enough to fill the hole, even as a glop in the middle, it will flatten itself out. I let it dry overnight before putting the thing vertical, or it will ooze out even hours after applied.
I discovered some cheese cloth in my drivers floor pan under the point of the wing vent where water drips. I will probably skin it with JBWeld, but I will apply painters tape to the underside to keep it from oozing out of the holes until it cures. |
Re: Restoring Rusty
For the last two days I have been reading this thread, its great. This is like the "GO TO" thread for your project. You do a little bit of everything and anyone looking for help is bound to find it in this thread.
|
Re: Restoring Rusty
Agreed ^^^^
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
I'm sure you at one time found yourself jumping from one thing to another one project to another when working on your Pick Ups. Well I feel like that's happened to me so it's time to make a list of what we have going on here before we go crazy:
1. As you all know October was the National Lower Your Truck Month (ok, I just made that up), but The Greg was trying to lower his truck but hit a snag when the McGauphy's front coil springs sagged more than expected. 2. So he, being out of money for the month, decided to do the Mad Dash. Remember our budget is around $300 bones per month. Well after stripping the dash to bare metal and JB Welding it, we had to wait for things to dry and for the textured paint we ordered. 3. So the knucklehead went out and bought a Tinted Slider Rear Window. But did he install it, no sirie bob, he had no money for the new rubber seal, so what did he end up doing? 4. He went out and bought a seat, well technically Seat Cushions. OK, awesome and got the seat done? Negative Ghost Rider, he had no money for the seat vynil covers! So then what did he do? 5. Well naturally he bought some new used side mirrors! Great, so we can check that off the list? Not so fast McFly, we did not like them, they are too small, can't see nothin out of them, going to buy new aftermarket ones instead!!! SAY WHAT! This does not sound like our Greg! |
All times are GMT -4. The time now is 09:30 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com