Re: Restoring Rusty
1 Attachment(s)
Gentlemen I've been sitting here agonizing over my chronic exhaust leaks and I think I see the problem, take a look at this picture, don't it look like the Hooker header ports don't match the location of the ports on the L31 Vortec cylinder head?
this is the passenger side head, can you see the black square outlines and how they are all shifted over to the right about 3/16ths of an inch, all four ports are like that, as if the header was bolted up a bit too much forward and not on center of the exhaust ports am I crazy or do you see it? |
Re: Restoring Rusty
1 Attachment(s)
the driver side is offset too but in this case it seems like this header sits about 1/8th of an inch too far back and needs to slide forward a bit for the holes to align
I don't think I can fix this by welding the bolt holes up and then re drilling them in their proper locations as it's a poor design and the holes will hit the pipes |
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
I think I'd widen the contact area with a MIG or TIG or even my Oxy Mapp torch then file or grind or mill for flat contact.
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
Been driving the truck to work every day this week! It runs great, The Greg is so happy!
Monday - drove it in Tuesday - drove it in Wednesday - drove it in Thursday - drove it in Friday - drove it in guys keep at it and you'll get your projects on the road if they aren't already it is such a great feeling, the sqeaks the noises the smells, ha ha |
Re: Restoring Rusty
did I mention the wife will be out of town this weekend and I have already scheduled the next Dyno Test for Tuesday October 4th the year of our Lord 2016 so I am making a list of touch ups WE need to make to make Rusty Roller Ready
1. Fix Exhaust Leak (AGAIN) 2. Replace Magnaflow mufflers with just large resonators 3. Shorten #5 spark plug wire 4. Fix/calibrate one of the AFR Oxygen Sensors 5. Eliminate transmission noise by draining a bit of fluid 6. Finish hooking up license plate light 7. Maybe try a 1" carb spacer 8. something I forget 9. misc. 10. etc. |
Re: Restoring Rusty
I'm excited to see the dyno results. There are none near me and being without a trailer to take my truck kind of leaves me hung out to dry.
|
Re: Restoring Rusty
Not enough bark with the Magnaflows?
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
2 Attachment(s)
here we go, first the straight edge and eyecrometer test
|
Re: Restoring Rusty - Hooker Headers
3 Attachment(s)
then the build up and the grindage
|
Re: Restoring Rusty
3 Attachment(s)
and now the sides
|
Re: Restoring Rusty
3 Attachment(s)
and the other side, sorry some pics were taken with the header upside down
|
Re: Restoring Rusty
3 Attachment(s)
then I decided to cut up the flange into three separate pieces, this is an old Hot Rodder trick passed on from generation to generation by the spinning angle grinder
so first we mark the flange with a Sharpie with surgical precision, ha ha |
Re: Restoring Rusty
4 Attachment(s)
a final look at the finished product - the passenger side Hooker header be modified
|
Re: Restoring Rusty
1 Attachment(s)
then I got bored of all the grinding and decided to get rid of the Old Man Magnaflow mufflers - they just had no bite and you know Rusty needs a proper Soundtrack
laying around we had our 9 inch resonators, a bit too small but it would be criminal not to give them a go mandatory stare and compare old vs new(ish) |
Re: Restoring Rusty
1 Attachment(s)
I give you Exhaust 6.0
Welded by the light of the moon, (no seriously I welded this up in the dark, from spare tubes, not bad at all if I do say so myself) |
Re: Restoring Rusty
1 Attachment(s)
so this...
|
Re: Restoring Rusty
1 Attachment(s)
... better fix this
|
Re: Restoring Rusty
Which gaskets are you going to use with 6.0?
Exhaust not 6.0L ;) Posted via Mobile Device |
Re: Restoring Rusty
2 Attachment(s)
Quote:
I hope to git these round port aluminum Mr. Casket ones Part # 7402G (G is for custom made for Greg I think) which I already owned once, but like a fool returned |
Re: Restoring Rusty
Yeah I saw those and wondered if you were going to use them or those never have to retorque ones.
Posted via Mobile Device |
All times are GMT -4. The time now is 03:48 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com