Re: Restoring Rusty
Man, sorry to hear about the house. Total swift kick in the (name anyplace that hurts). Glad you found something so quick. Good (great) grab on that front clip. You blew it apart fast. You are on your way to having a spare Not So Rusty. I hope the pack-up-and-re-lo-cate goes well.
|
Re: Restoring Rusty
Sucks you have to move again. I hope the new digs will suit you and your family a long time or until you if d more permanent digs. That front clip is really making me jealous. Gosh do you really need that. I will give you 150 for the whole shebang. Lol.
|
Re: Restoring Rusty
Gregski, sorry to hear about the house situation, but then happy that you already have a prospect in mind.
Looking forward to seeing what happens with Rusty (Fleet or Stepper). |
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
1 Attachment(s)
So moved in to the new house over Superbowl Weekend
Couldn't resist taking this pic of one of the first boxes moved. Epic! |
Re: Restoring Rusty
1 Attachment(s)
Truck Doing Truck Things!
Rusty sure earned his keep! I don't know how people live without a truck in their stable? |
Re: Restoring Rusty
1 Attachment(s)
One load down, dozens to go...
Apologies for posting one pic at a time, its all my iphone allows me to upload at once |
Re: Restoring Rusty
1 Attachment(s)
Since I went from a three car garage to a two I tried storing some truck parts in the kitchen, but the wife didn't go for it😳
I don't get chics, hee hee |
Re: Restoring Rusty
1 Attachment(s)
When it was all said and done you couldn't fit a que tip in that garage...
Fun Level = 1.1 |
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
:haha:
Quote:
|
Re: Restoring Rusty
Glad you got moved. Can't believe you sat that box like that. Can't you read? Lol.
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
1 Attachment(s)
Captain's Log March 3rd, 2017, today Rusty becomes my Daily Driver. That's right after a 3 year lease I returned my electric Nissan Leaf and will try to drive this 1974 rig on a daily basis, wish me luck.
|
Re: Restoring Rusty
3 Attachment(s)
so finally got a couple hours to work on the truck, one thing that needed doin' was to swap the side hung float bowls with the center hung ones on this Holley carb, this also called for replacing that silly little straw connecting the two float bowls with the single fuel inlet with a proper dual inlet hard line (though I am not a fan of the hard line and may try a rubber hose solution some time down the line)
|
Re: Restoring Rusty
4 Attachment(s)
the last time I attempted this swap I did not have these two coupling adapter thingies to screw in the smaller fittings of the hard line into the much larger openings in the float bowls
so I scored this one on eBay... |
Re: Restoring Rusty
3 Attachment(s)
and this second coupling I bought directly from Holley, same thing just a little bit more money
I honestly don't know where the smaller gasket is supposed to go as it just falls in if inserted towards the cab side |
Re: Restoring Rusty
3 Attachment(s)
so having those two thingmajigs allowed us to mount the chrome hard line to the carb, it took some gentle persuasion to separate the inlets to be as wide as the carb they came about 1/4 inch too narrow I think, hey aftermarket parts right!!!
|
Re: Restoring Rusty
4 Attachment(s)
then the typical interference problems started, hey it's Hot Roddin' aint it, nothing fits on the first try
that pesky chrome hard line hit the water inlet/outlet for the heater core in the intake manifold, go figure right?! well we was ready for that, so I busted out one of my trusty 1 inch 4 hole plastic carb spacers and gave that a go |
Re: Restoring Rusty
3 Attachment(s)
well naturally now we needed longer carb studs, so we tried the 2" tall ones and not even they were tall enough
so we hit Oh'Reallys and picked up the 2 1/2" ones and they did the trick |
Re: Restoring Rusty
by then it got too dark to take a final pic, but we got everything assembled and after tightening that silly hex stud in the chrome dual hard line inlet we stopped the gushing gasoline fountain
we squirted some gasoline into the float bowls via their vent towers and the truck fired right up I adjusted the float bowls so that the gas is half way full in the sight glasses both front and rear float bowls the truck warmed up in the garage and then we took it around the block for a test drive, it ran good I kept the same carb configuration I had before: 69 primary jets / 73 secondary jets (I think best I could see) 35 accelerator pump squirter 10.5 power valve (cause I'm pulling silly strong 20 inch vacuum at idle) yellow vacuum secondary spring no idea what color accelerator pump cam, will check in the morning (what ever stock one it came with) |
Re: Restoring Rusty
Quote:
I've never owned a pickup of my own, but that's why I'm on the hunt for one. Getting into woodworking and metalworking means I need to be able to haul materials! Same thing goes with landscaping. My Wrangler can only carry so much even with the top down and the rear seat bench out! Great thread, at any rate! |
Re: Restoring Rusty
I have had a truck since I was 19. I don't like borrowing a truck. If you own a house you really need a truck. Be it big or small a truck will save you in the long run. I have a small truck. It's plenty for what I need. I get my 76 on the road and I'll have two. Glad to see you back Greg.
|
Re: Restoring Rusty
Good on fixing the hard line clearance. I had the same problem installing the one for my Summit carb. Funny...a gazillion carbs using basically the same setup on a gazillion SBCs, and it doesn't quite fit.
|
Re: Restoring Rusty
Quote:
I love wood working and am trying to learn metal working, do you have a link to some of your work or future project ideas would love to see them. |
All times are GMT -4. The time now is 09:18 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com