Re: Restoring Rusty
2 Attachment(s)
after some grunting, some PB Blaster, and some more grunting, both long bolts and body mounts were out
|
Re: Restoring Rusty
5 Attachment(s)
I also removed the battery tray just so that I could have more wiggability, and then it was time to wiggle the radiator support out
I took my time and wore some construction gloves so I wouldn't cut my surgeon like hands, ha ha and soon enuff Bob was your uncle |
Re: Restoring Rusty
1 Attachment(s)
This may be the justification you all were seeking for me pulling the core support out, surely many of you have removed an engine out of a car without removing the entire front end, right, well look in the bottom right corner of this structure, or the lack there of
|
Re: Restoring Rusty
3 Attachment(s)
now lets take a looksie at that engine without having the grille obstruct our view shall we
|
Re: Restoring Rusty
2 Attachment(s)
things were going great, I was on an adrenaline high, so I kept going
decided to remove the water pump, so easy now without the silly radiator in the way, ha ha four bolts later and it was off, by the way it must have square bearings cause it makes an ugly sound when rotating, needed replacing for sure |
Re: Restoring Rusty
1 Attachment(s)
ah what the heck lets separate the radiator fan from the water pump
|
Re: Restoring Rusty
2 Attachment(s)
I was hoping to put in 2 hours tonight, but ended up putting in 4, so needless to say it was soon Beer:30
~ that's all for today folks |
Re: Restoring Rusty
2 Attachment(s)
oh almost forgot, can you tell what is missing from one of these pictures, one is a pic of my original driver side fender, the other of an OEM replacement I got from a junkyard off of a '79 Scottsdale 10 for the passenger side
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
Quote:
when the fuel filler location were designed the filler nozzles of the day were of the old type (like a diesel nozzle) they were not problem like the vapor recovery nozzles are. The "taco" hood was a DOT mandate to all manufacturers. before the event of the folding hood, In a front end collision the hoods had a better than average chance of entering the passenger compartment and under enough cases decapitating occupants. due to their flat design, the real cause of the hoods bending over time is lack of lube to the hinges. The blower on always was not a defect this was GM wide feature of their "Flow-Through" ventilation system. A lame idea in my book, but........ |
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
Quote:
I've had four of these 73-80 trucks that had hinges that were properly lubed by the owner. All of them had zero bends in the hood. |
Re: Restoring Rusty
Yup, that spot is a devil. Here's a nice shot of mine. Also notice that the front of the wheel well and the inner fender structure are gone too.
http://i637.photobucket.com/albums/u...ps1lb7p876.jpg http://i637.photobucket.com/albums/u...pstz7qhrn1.jpg http://i637.photobucket.com/albums/u...psu0plveta.jpg http://i637.photobucket.com/albums/u...psptxvgzd5.jpg |
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
2 Attachment(s)
Day Three of Leftie Loosies
Fun Level = 11 (a little Spinal Tap reference for you all, horns up if you got it) man I tell you working in a clean garage with an empty surface to put your parts on is such a big difference and a pleasure to work on your truck |
Re: Restoring Rusty
2 Attachment(s)
we decided to move this party indoors tonight, and do a little wrenchin in the cabin
first we loosened up the shifter rubber boot |
Re: Restoring Rusty
3 Attachment(s)
we were paying attention the last time we dropped the tranny so we learned (thanks to you all) how to press down and turn the metal cup to get the shifter stick out
|
Re: Restoring Rusty
1 Attachment(s)
Hey, is this what they mean by Four On The Floor?
ha ha, I kid I kid |
Re: Restoring Rusty
2 Attachment(s)
then we removedatized the transmission turtle shell
|
Re: Restoring Rusty
2 Attachment(s)
we disconjoined the go backwards light switch thingie
|
Re: Restoring Rusty
Johnny are you taking notes, there will be a Quiz you know!
|
Re: Restoring Rusty
2 Attachment(s)
next we disconbobulated the "Do You Know How Fast You Were Going Son?" cable
|
Re: Restoring Rusty
3 Attachment(s)
then we had to suck in our gut (see Lowering The Truck posts above) and slid under the truck like a sloth and removed the ZZ Top bar
|
All times are GMT -4. The time now is 06:50 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com