The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Help needed for Wilwood disc brake upgrade (https://67-72chevytrucks.com/vboard/showthread.php?t=803070)

Dillon1972C10 03-22-2020 03:11 PM

Help needed for Wilwood disc brake upgrade
 
Have a 1972 C10 upgrading brakes to Wilwood. Fitting adapter needed from factory hardline to Wilwood flexline. Is there a fitting available for conversion? Thanks!

3767 03-22-2020 05:51 PM

Re: Help needed for Wilwood disc brake upgrade
 
I have 2 ask so bear with me. Have u tried the wilwood flex line to your hardline yet?

basketcase 03-23-2020 12:15 AM

Re: Help needed for Wilwood disc brake upgrade
 
If your flex line is 3AN I just did a braided hose conversion on my '69 with '72 brakes. Of course you know that the drivers side hard line fitting is 7/16x24 and the passenger side is 3/8x24 thread even though the hard line tubing is the same. I used an Earls 3AN to 7/16 Summit pn EAR-989549ERL on the left side and a Wilwood Summit pn WIL-220-13124 3/8x3AN on the right side. Summit price was $6.64 and $8.26. These both fit the crossmember tabs and the clips fit them too.


Tom

Dillon1972C10 03-25-2020 03:33 PM

Re: Help needed for Wilwood disc brake upgrade
 
Thank you for your responses. We haven't started the upgrade yet but wanted to make sure we have everything once we start.


All times are GMT -4. The time now is 07:32 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
Copyright 1997-2020 67-72chevytrucks.com