Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
4 Attachment(s)
so a bit of bad news aka Grinder Update, well even with new brushes and new bearings that thing struggles to spin, gives off a funny smell, and sounds like the ice cube dispenser in my fridge
so I did the right thing and jumped on The eBay and bought another one, also used, also broken aka "For Parts Only" in hopes that out of two broken ones WE (yes you are in on this too after all) WE can end up with maybe one semi quiet non smokey spinner!? |
Re: Restoring Rusty
1 Attachment(s)
praise be to Jeff - we may just be back on track
|
Re: Restoring Rusty
3 Attachment(s)
so glad my new angle grinder came with the spring cleaning bench attachment, ha ha
|
Re: Restoring Rusty
2 Attachment(s)
after wire wheelin' all the loose rust off the bench seat frame, we got it into the acid bath, looking pretty good
|
Re: Restoring Rusty
Good job! It is looking good:metal:
|
Re: Restoring Rusty
5 Attachment(s)
Quote:
|
Re: Restoring Rusty
2 Attachment(s)
I like to get the cleaned raw metal parts in primer right quick, as they have a tendency to flash rust imediatemente
|
Re: Restoring Rusty
1 Attachment(s)
so we ended up with 8 broken springs, and I tell you what, I bet you have more weakened or broken springs in your bench seat than you think, I knew some were gonna brake as I tried to take them out of the frame, but others showed how weak they were only once I took a wire wheel to them and knocked off all the rust
|
Re: Restoring Rusty
1 Attachment(s)
had a little assembly line going, these springs are awaiting the dance with the wire wheel
|
Re: Restoring Rusty
1 Attachment(s)
and these have already been cleaned, one by one mind you
Fun Level: a solid 2.5 |
Re: Restoring Rusty
1 Attachment(s)
all in all I managed to salvage and clean a dozen springs, though only 11 survived as 1 seemed to spring from the angle grinder and go flying into our new neighbor's back yard... allegedly
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
4 Attachment(s)
and then it was time to make things black
I like to paint with a brush because.... I'm old! |
Re: Restoring Rusty
1 Attachment(s)
Me: Let's paint with a brush so we don't waste that much paint
Also me: |
Re: Restoring Rusty
3 Attachment(s)
then we paintenated the bottom portion
|
Re: Restoring Rusty
1 Attachment(s)
even the springs got some love
|
Re: Restoring Rusty
3 Attachment(s)
I don't know about you, but I like to finish up my bench seat frame restoration by painting my tail pipes
|
Re: Restoring Rusty
1 Attachment(s)
Ah but Greg, surely you did not use that "regular" paint on your exhaust, and went out and bought proper high heat BBQ paint or manifold paint?
|
Re: Restoring Rusty
guys I honestly don't know what I did to upset the upholstery gods Vinyllo and Leatherodite but it's been 10 days now since I ordered my bench seat cover from USA1 and no cover yet, not even a shipping confirmation nor a tracking number
So I authored an electronic mail to their customer service department and received this message: "All seat covers currently have a 8-10 week lead time from order date at this time." well had I known this I would NOT have ordered from them, I would have raised a calf to full grown cow myself, and liberated it's hide by myself, do you think they should have put that DISCLAIMER on their products page? |
Re: Restoring Rusty
Quote:
Way too many outfits are frightened to let this information out in the wild. Amazon still claims Free 2 day shipping with PRIME, ummm NOPE, it's seven business days for me if I sacrifice a printer or a calculator on the altar of the appropriate god. Supply chain interruptions are not going to get better as tensions escalate with China. |
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
:chevy: |
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
Quote:
Greg, 8-10 weeks is a walk in the park. :) |
All times are GMT -4. The time now is 01:13 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com