Re: Restoring Rusty
5 Attachment(s)
you can skip this part, these are the pics of all the 11 patches (well minus one tiny little square one, I missed one and had to make it last minute as I was glueing them on - hey full disclosure)
|
Re: Restoring Rusty
4 Attachment(s)
yes I decided to patch the little stupid square holes too, what can I say I'm anal
|
Re: Restoring Rusty
3 Attachment(s)
I give you the 11 ... [oops] 10 patches
for sanity reasons, I decided to double up with some patches so that one patch could span / cover two holes |
Re: Restoring Rusty
5 Attachment(s)
anybody still with me, ok good, then it was time to make a mess
not sure if using a brush is the most efficient / effective means of spreading this JB Goop but maybe it will work |
Re: Restoring Rusty
4 Attachment(s)
prepare to use every thing you got, C Clamps, magnets, heavy stuff to weigh things down with
|
Re: Restoring Rusty
4 Attachment(s)
using a paper towel in there because the metal is not flat its a bit convex
and then we let it set, we wait, and we wait |
Re: Restoring Rusty
That's it for today, wondering if I should move this contraption in the garage for the night, or not mess with it and leave it outside over night - gonna be 56*F tonight - but shoot rain tomorrow
|
Re: Restoring Rusty
Yessir the seat bolted right in.
|
Re: Restoring Rusty
Cant wait to see more of this .
|
Re: Restoring Rusty
5 Attachment(s)
Quote:
|
Re: Restoring Rusty - JB Welding The Dash Cover
5 Attachment(s)
and the bandages come off
|
Re: Restoring Rusty
5 Attachment(s)
lots of silly pics of lots of silly holes
|
Re: Restoring Rusty
5 Attachment(s)
so it took 6 hours to set and 24 hours to cure, so I removed the C clamps and magnets after 24 hours - trust me the waiting was the hardest part, going to bondo the holes next, maybe tomorrow
here is the belly |
Re: Restoring Rusty
Can't wait!
|
Re: Restoring Rusty
Don't bondo them... Just use more JB weld and it will cure like metal and look 100x once you've sanded it all down good.
|
Re: Restoring Rusty
Quote:
Bondo will crack at the parting line with the holes. Lab Metal or JB Weld epoxy will not. |
Re: Restoring Rusty
Looks great. Cannot wait to see the final product. Been wondering what to do with my dash so you may have just provided the answer.
|
Re: Restoring Rusty
I might have to try this on Clarence (my 74 stepper) someday if I dont sell him off.
|
Re: Restoring Rusty
Look's good any updates ?
|
Re: Restoring Rusty
2 Attachment(s)
Gregski, you inspired me! Picked up a donor bed today. I will be using the base, front and wheel wells. My original looks like it was used to haul loose cannon balls. Sorry, about the upside down pics.
|
Re: Restoring Rusty
2 Attachment(s)
thanks, man you were giving me virtigo - ha ha
|
Re: Restoring Rusty
Quote:
Daughter Knows How To Get Dads Attention |
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
Family first
|
Re: Restoring Rusty
2 Attachment(s)
so couple of weeks ago I got one of these $20 bucks off Rewards for being a ToolKit member at our local Pick n Pull junkyards
What to spend it on? |
All times are GMT -4. The time now is 11:19 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com