DD Engine mount location
 

I read but maybe im doing something wrong. I bought and put in a DD LS cross member. I am using the stock TH350 because I dont want to shorten the stock driveshafts. It looks like im about a 1-1/2 off, I do have adjustable motor mount plates but still no where close. Engine is about 1/2" from the pass fire wall. It looks like I cant move my DD engine mount back anymore. Any suggestions?

https://i.ibb.co/YWqnT5D/LS-engine-DD-1.jpg
https://i.ibb.co/0GFy11g/LS-engine-DD-2.jpg
https://i.ibb.co/KXnkZVx/LS-engine-DD-3.jpg
https://i.ibb.co/pd9VxKR/LS-engine-DD-4.jpg
https://i.ibb.co/6rhV2ff/LS-engine-DD-5.jpg
https://i.ibb.co/pX3QGTj/LS-engine-DD-6.jpg

Re: DD Engine mount location
 

im not sure on the DD mounts...i used the "ebay" adapter plates that let me use the sb clamshells and motormounts.. they postioned the rear face of the LS at the same spot the sbc was..no clearance issues

Re: DD Engine mount location
 

Thats what I did, I used the ebay mounts and the clam shell rubber motor mounts that bolts to the Dirty Dingo cross member. I left the Transfer case in the original spot and mated the trans and engine to it.

Re: DD Engine mount location
 

hmmmm... if nothing from trans back didnt move ,i dont know..
mine is 2wd so there may be some difference there.. but i can easily stick my hand between engine and firewall

just realized i dont know what your working on.... 72 blazer?

Re: DD Engine mount location
 

Yes 72 Blazer 4x4

Re: DD Engine mount location
 

you could ge the dirty dingo adjustmernt
adapters i think they prodive like 3 inchs of adjustment

Re: DD Engine mount location
 

I just ordered some, hope it works!