The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- Engine & Drivetrain (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=24)

- - 14 bolt SEMI FLOAT outer axle bearings (https://67-72chevytrucks.com/vboard/showthread.php?t=826542)

Asshat

10-05-2021 04:25 PM

14 bolt SEMI FLOAT outer axle bearings

1 Attachment(s)

Has anyone replaced the bearings in a semi float rear axle?

Special tools required?

mongocanfly

10-05-2021 04:37 PM

Re: 14 bolt SEMI FLOAT outer axle bearings

i changed mine out...i made a tool that would hook the bearing from the back side and had to drive it out from the opposite side..never could get a puller to catch the bearing race
they make and sell some special pullers for doing those

Asshat

10-05-2021 04:50 PM

Re: 14 bolt SEMI FLOAT outer axle bearings

Maybe this would work?
https://www.harborfreight.com/rear-a...set-62960.html

Installing the bearing and seal is just a matter of tapping it in?

Bigdav160

10-05-2021 04:59 PM

Re: 14 bolt SEMI FLOAT outer axle bearings

Quote:

Originally Posted by Asshat (Post 8980464)

Maybe this would work?
https://www.harborfreight.com/rear-a...set-62960.html

Installing the bearing and seal is just a matter of tapping it in?

Plus a good 5 lb slide hammer.

Bushing/Race driver set comes in handy for driving the bearing back in.

All times are GMT -4. The time now is 04:29 AM.