205 VSS Solution
I installed this on my K5 swap. I know in the past this company was a little sketchy on delivery, but new owners seem to be on top of things. This installs easy and gives you the correct 40 pulse for your swap without losing your original speedometer. Delete if innapropriate.
https://behemothdrivetrain.com/produ...TPeRnLLQY1KUSE |
Re: 205 VSS Solution
Ok, so clue me in. Does this take place of part of the transfer case? Just bolt on, or is there more to it? Not a 4x4 guy, but may be doing a swap for a buddy in the near future.
|
Re: 205 VSS Solution
|
Re: 205 VSS Solution
Replaces the rear seal plate on back of the 205 Transfer case. Toughest part is removing nut on yoke. Will post picture tonight.
|
Re: 205 VSS Solution
That looks great I was looking at speedo splitter and use 1 to run vss generator other to run speedo
If I was to use 4l80e I would add second reluctant ring in build |
Re: 205 VSS Solution
1 Attachment(s)
Picture of Transfer Case with VSS installed
|
Re: 205 VSS Solution
I’ll have to remember this when the poor design advance adapter 4l60e to np205 adapter with the tone wheel clamped on the transmission output shaft fails.
|
Re: 205 VSS Solution
Does it take a standard gm vss pickup ?
|
Re: 205 VSS Solution
Yes, Standard VSS and Plug
|
All times are GMT -4. The time now is 01:58 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com