The 1947 - Present Chevrolet & GMC Truck Message Board Network - WA 1971 C20 LWB For Sale --------------------- $18k -----------------------------------

Reluctantly selling this 1971 C20. It's an 115k original truck that was clearly lovingly owned, with a single repaint in its original color. It's certainly not a perfect truck but is just a very nice driver. I've owned about 8 of these trucks over my life and this one drives better than any, its truly a time capsule. Here are some details and of course photos.

Priced at $18k. Only listing here as I want it to go to a good home.

-Very low mile 350 goodwrench crate engine. Non matching numbers. Rebuild rochester, starts with the flip of a key and runs great.
-Original to truck TH350, shifts beautifully.
-Repainted once in its original colors. Not a super high dollar paint job but respectable. Shines nice, some orange peel in the white. Very nice driver condition.
-Engine bay is original paint, clean and respectable. Has rust under battery tray like the all do. Has factory chalk marks on firewall, core support, and engine crossmember.
-The rockers were replaced and it has one patch over a floor brace as shown in pictures. Otherwise just a spec of rust in between the bed floor and the wheelwell(pic below)
-Authentic thick rubbed GM bed mat
-Original interior except for floor mat, gauge bezel, and radio as mentioned below. Also dealer installed AC. Fan runs but no belt on compressor. Assume it needs seals and a recharge. Have 3 point seat belts I’ll be installing this weekend. Can recover seat if new buyer likes, but covers are back ordered right now.
-All electrical works on the truck, turn signals(new switch), reverse lights, shift light indicator, high beams, heater, dome lamp, wipers, horn etc! Even the light buzzer!! I didnt even know these trucks had light buzzers until I owned this truck.
-Aftermarket radio that fits in stock slot, speakers are just sitting on the floor under the seat as to not modify any part of the truck.
-"nospin" Positraction rear end and factory overload helper spring
-Power disc brakes
-Power steering
-Newer dual exhaust, good shape, fairly quiet like factory
-White steel wheels, later model hubcaps in good shape. Tires are lower on tread but fine for dry weather driving like I do.
-Fresh fluids all around

Now to the pics...
https://live.staticflickr.com/65535/...90d59689_z.jpg
https://live.staticflickr.com/65535/...841e8fd3_z.jpg
https://live.staticflickr.com/65535/...c7df026e_z.jpg
https://live.staticflickr.com/65535/...33dd74ab_z.jpg
https://live.staticflickr.com/65535/...d76d1c03_z.jpg
https://live.staticflickr.com/65535/...18f843b3_z.jpg
https://live.staticflickr.com/65535/...5c8c17a6_z.jpg
https://live.staticflickr.com/65535/...7093c8b4_z.jpg

Authentic heavy duty GM rubber mat
https://live.staticflickr.com/65535/...3c471daa_z.jpg

Bed under the mat in great shape!
https://live.staticflickr.com/65535/...340ea598_z.jpg
https://live.staticflickr.com/65535/...f17df010_z.jpg

Little rust in between driver side bed wheelhouse and bed side:
https://live.staticflickr.com/65535/...5285d644_z.jpg

https://live.staticflickr.com/65535/...964d3d8a_z.jpg
https://live.staticflickr.com/65535/...c94305c1_z.jpg
https://live.staticflickr.com/65535/...a2b058dd_z.jpg
https://live.staticflickr.com/65535/...8e6208b5_z.jpg

Positraction manual, owners manual, protecto plate. Original Seattle truck:
https://live.staticflickr.com/65535/...51d648bb_z.jpg

Sanitary engine bay. Original chalk marks on firewall, core support, and crossmember.
https://live.staticflickr.com/65535/...84c2a39b_z.jpg
https://live.staticflickr.com/65535/...b60782f9_z.jpg
https://live.staticflickr.com/65535/...ae248b60_z.jpg

Driver side metal all original except outer rocker.
https://live.staticflickr.com/65535/...ec3b8369_z.jpg

Pass side rocker and cap over front floor/rocker brace
https://live.staticflickr.com/65535/...2e94a0d0_z.jpg