Re: Ok Boys and Girls it's Storytime
 

[IMG]http://i911.photobucket.com/albums/a...ganw/106_1.jpg[/IMG]

Re: Ok Boys and Girls it's Storytime
 

[IMG]https://i911.photobucket.com/albums/...reganw/099.jpg[/IMG]

Re: Ok Boys and Girls it's Storytime
 

[IMG]http://i911.photobucket.com/albums/ac317/reganw/097.jpg[/IMG]

Re: Ok Boys and Girls it's Storytime
 

[IMG]http://i911.photobucket.com/albums/ac317/reganw/098.jpg[/IMG]


Average hp and tq from 6300 to 7800 1270hp and 950tq.
This was on Sunoco Maximal fuel. Had we tried the Q16 again it would have been worth 3 percent more power or better.

Re: Ok Boys and Girls it's Storytime
 

POWA house right there . BA #s man . Lots of hard work to get to that point .

Re: Ok Boys and Girls it's Storytime
 

Thanks Hotrod. Over 2 years to get the motor together. Once we get my header situation figured out I can start putting it back together.

Re: Ok Boys and Girls it's Storytime
 

I’ll be happy with a little more than half that. Thx for the Thanksgiving update!

Re: Ok Boys and Girls it's Storytime
 

Hey Regan, pretty sure I recall you were running a Turbo 400 with a 2.48 1st gear correct? If so are you still running that ratio? I know you are on a throttle stop, but when you have done a full launch how was the 1st to 2nd shift?

I'm running a 4.56 rear gear now with a 32.6" tire (next tire will be a 33), I'm building a new 400 for it and thinking that the 2.48 might be a bit too violent behind a 615ci BBC off the line, motor should be in that 1200hp 900trq give or take range, est shift point 7800, but until its on the dyno these are all just numbers off of past builds the shop has done.


Anyway wondering if I should do a 2.10 1st gear instead.

Re: Ok Boys and Girls it's Storytime
 

I have been running a 2.10 low with a 1.31 second gear for years now. It can still be a little violent. The stock ratio is definitely a no go.
Posted via Mobile Device

Re: Ok Boys and Girls it's Storytime
 

Thanks, thinking I'll have to do the same as 2.48 will be brutal.

Re: Ok Boys and Girls it's Storytime
 

Regan or 71Dragtruck,

Have either one of you guys tried a glide? I've been toying with that idea myself, but am making nowhere near the power that either of you two are making. I know there are a few different low gear choices available for the glide. My main reason for considering a glide is traction on a less than ideal track surface. Just curious if anyone has went that route.

Re: Ok Boys and Girls it's Storytime
 

I've been talking to Hutch about building me a trans, he said if my truck 3700# was a couple hundred lighter he would suggest a glide, but then I'd be back to a 2 piece drive shaft for sure.

Re: Ok Boys and Girls it's Storytime
 

Well,

I'd say Hutch ought to know, then. I just figured that, with that kind of power, maybe a 2-speed might calm things down enough to be of benefit. Sounds like you have things covered, traction-wise, with the 4-link and being more able to compensate for the hit of a 3-speed.

Re: Ok Boys and Girls it's Storytime
 

Some guys with 400’s that have the valve body to run the trans brake in 2nd have launched that way too I guess, if your trans is set up for it. I’ve never seen it, just read over on the yellow bullet guys talking about it.

Sorry for taking your thread off topic Regan, guess I should have started a new one.

Re: Ok Boys and Girls it's Storytime
 

No problem 71. I honestly just like my 3 speed. Powerglides kinda bore me. I have driven quite a few racecars with them. My ratios work good for me on the throttle stop because I come off the stop with a 5.97 ratio (in 2nd gear).

Re: Ok Boys and Girls it's Storytime
 

Yep, sorry about the thread hi-jack, too. You guys kinda reminded me about one of my off-season projects. I do appreciate the info from you both.

Re: Ok Boys and Girls it's Storytime
 

Hey Regan good to see Motor done and really good #'s. Would like to see Truck run at the track next time you go.

Re: Ok Boys and Girls it's Storytime
 

71 Dragtruck Just had TransKing freshen my 400 and added 300M input & main shafts ; clutch hub and a 2.22 1st gear from Coan. If you have any questions let me know maybe can help out.

Re: Ok Boys and Girls it's Storytime
 

Rick thanks for the compliments. I see you found the extra power you were looking for. You been keeping that a secret huh? My plans right now are to have the truck back together by the end of January (fingers crossed). Then go test in February, maybe at Extreme Raceway or Ennis. I plan on my first race being the Houston Divisional March 22nd.

Re: Ok Boys and Girls it's Storytime
 

Yes we did find a few more hp. Motor didn’t like the Sniper Jr so had some more work done to the Super Victor and a few other small tweaks. I Passed by The new track towards Dallas last month and Looks like a nice track. Good luck and if you need any pit crew help let me know. I could help you out in Houston as I’m only an Hour from the track

Re: Ok Boys and Girls it's Storytime
 

We'll see how everything goes. You are always welcome to come hang out. I asked for some tire checkers in Oklahoma a few years ago! Didn't get any takers.Your numbers on that Pump Gas deal are way more impressive than my deal. That's Awesome.

Re: Ok Boys and Girls it's Storytime
 

I just brought the truck back home from the chassis shop. My old friend Tony Smith that built the cage,rear end and headers. Tony cut the 2 1/4 step out of the headers and rebuilt them with 2 3/8 all the way to the 5' collectors. He also made me a neat little alternator bracket and a T-Stop solenoid bracket that will double as a spring bracket for the throttle.[IMG]https://i911.photobucket.com/albums/...ganw/021_1.jpg[/IMG]

Re: Ok Boys and Girls it's Storytime
 

While we were at it we took the #7 and #8 tubes outside the frame[IMG]https://i911.photobucket.com/albums/...ganw/022_1.jpg[/IMG] rails.

Re: Ok Boys and Girls it's Storytime
 

[IMG]https://i911.photobucket.com/albums/...ganw/020_1.jpg[/IMG]

Re: Ok Boys and Girls it's Storytime
 

Solenoid Bracket[IMG]https://i911.photobucket.com/albums/...ganw/026_2.jpg[/IMG]