Re: Restoring Rusty - Replacement Tach
 

what do we have here, looks like our replacement new used Tachometer showed up

don't mind the Amazon box, I bought it off of eBay for $45 bucks, using the buy it now option, now I either got really taken if it does not work, or I scored majorilly as a new one is $150 bucks

about to put it in, so wish me luck...

Re: Restoring Rusty
 

well the replacement Tach appears to be working, it may be 75 RPMs off but that's assuming my used digital timing light is spot on, I will have a friend at a shop compare it to his timing light so we know for sure, but hey it's just a truck so it's good enuff for me

Re: Restoring Rusty
 

Good enuf for you means money well spent. Great progress against your to-do list!

Re: Restoring Rusty
 

Sell the other one. Someone will buy it even though it's off a bit. It works and it can be re-calibrated... For that matter so can this one.

Re: Restoring Rusty
 

Good deal for $45!

Re: Restoring Rusty
 

thanks, still tons left to do, I would make another list but I'm afraid you all would hold me to it, LOL

Re: Restoring Rusty
 

Make the list...and share it.

Re: Restoring Rusty - New Small Fuel Gauge
 

suga'
... yes please

special thanks to Rich for recommending Classic Parts, got a great price on this brand new fuel gauge, even the back studs are labeled

now off to install it

Re: Restoring Rusty
 

I flipped the resistor over so the contacts were on top, and put star washers under the nuts so the resistor wouldn't lose contact so easily. Common "failure" mode that gives 1/4 reading when full. Take it out, tighten the connections, works again. Infuriating given how much digging you have to do to get to it.

Re: Restoring Rusty
 

You my friend are the Dean of College of Truck Knowledge!

Re: Restoring Rusty - 74 to 78 Gauge Cluster Swap
 

I hate this West facing garage the sun is right in my face and right in the camera lens

We got ourselves an electric oil pressure gauge, a volt meter, a TACHOMETER, and a new fuel gauge....

Fuel gauge is in, this 74 to 78 gauge cluster swap is officially done!

Thank you all for your help

Re: Restoring Rusty - Period Correct '74 Radio Knobs
 

well I hope you approve cause I had to meet a feller in a shady Rico's Pizza parking lot to get these, but you know The Greg he gits 'er done!!! and sometimes even the correct way, hee hee

... now who did I loan that Bon Jovi cassette to back in the summer of '86?

Re: Restoring Rusty
 

Glad to see it all back together. Right or wrong, I like the knobs on the radio.

Re: Restoring Rusty
 

Thank you, me too

Re: Restoring Rusty
 

So Greg it's been like 10 minutes since you completed your last project, what are you going to do next...

I don't know guys... I am kinda tired, so I think it's BED TIME!!!

Re: Restoring Rusty - Bed Time
 

if you all recall the bottom of my bed is toast, so it's time to replace it with the bottom from that donor bed I bought for $40 bucks a couple months back

Re: Restoring Rusty - Removing the Bed
 

when I took the donor bed apart I noticed the sides are indeed welded to the bottom portion in the rear corners of the tailgate

below I am showing you what needs to be cut

Re: Restoring Rusty - Tailgate Off
 

alright, here we go...

Tailgate Off!

Re: Restoring Rusty
 

as you know I am a one man circus act so I am going to attempt to take the bed apart in pieces whilst on the truck, piece by piece by piece

first to come off will be the driver side wheel well, but to get that off we need to remove the front strut bar thingie and the mud flat thingie behind it

Re: Restoring Rusty
 

alright about a dozen bolts later and a good stump with my foot and the rusty driver side inner bed fender was off

as you can see the inner fender has seen better days, nothing a man with a welding gun couldn't fix, but that man aint me, plus we have a replacement waiting in the corner of my garage from the donor bed

Re: Restoring Rusty
 

probly best to remove the tailights before the hard concrete floor removes them for me

Re: Restoring Rusty
 

so after undoing about 5 bolts between the cab and the bed side and another 2 or 3 under the bed by the cab, and another 5 or 6 in the back of the bed underneath, it was time to cut off them welds

Re: Restoring Rusty
 

only to realize there is another weld behind the tailgate hinge, time to remove the hinge and cut that one too, what a pain

Re: Restoring Rusty
 

and there we have it, drive side is off

I am pretty pleased, no broken bolts, and I did not spin any of those weld on nuts

the key to this operation is lubricant, (for you aka beer, and for the bolts, ie PB Blaster) unscrew a bolt a couple turns, then screw it back in, I don't care how easy it is coming out, you are building up heat and dragging a bunch of rust and grime into the threads, so screw it back in, then back out again, and you won't break any of them

more importantly this side is in really good shape, just surface rust and dust, other than that very solid

Re: Restoring Rusty
 

this is what the weld on section looks like when the side is completely removed as you can see it indeed was welded on, not the greatest picture quality but you git the idea