The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Electric connectors needed for 69 CST/10 (https://67-72chevytrucks.com/vboard/showthread.php?t=723317)

dmjlambert 11-25-2016 07:32 PM

Electric connectors needed for 69 CST/10
 
3 Attachment(s)
Hi, I have a 69 CST/10 with 350 SBC, factory A/C (non-working now but I hope to get it working), and a gauge cluster.

I would like to ask if anybody has leftover parts from a wiring harness or access to a salvaged harness, and may be able to provide me some parts? My electric harness is in pretty good condition, except for these 2 parts:
AC Blower motor switch connector (mine is melted)
Connector to compressor (mine is duct-taped)

Also:

Pin 5 of my instrument cluster connector is not occupied. That is the way it was made because I have a gauge cluster. But I would like one of these terminals that has been removed from a cluster connector, or a whole cluster connector. That pin 5 goes to a working TEMP light and I would like make that light work on my truck, using an indicator-light-type temperature sensor installed on the passenger side of the engine.

I would like to ask if anybody knows about the part I am pointing to with the arrow on the AC compressor connector? It looks like perhaps it is a diode. I'm not sure if that was integrated with the old connector or added by somebody for some reason. I don't see it on the wiring diagram.

So, my want-to-buy list is:
AC Blower motor switch connector
Compressor connector
Cluster connector or a terminal removed from a cluster connector

57taskforce 11-25-2016 08:58 PM

Re: Electric connectors needed for 69 CST/10
 
I most likely have what you need, may or may not have the compressor connector but I have the others.

FirstOwner69 11-25-2016 09:26 PM

Re: Electric connectors needed for 69 CST/10
 
Quote:

Originally Posted by dmjlambert (Post 7777889)
I would like to ask if anybody knows about the part I am pointing to with the arrow on the AC compressor connector? It looks like perhaps it is a diode. I'm not sure if that was integrated with the old connector or added by somebody for some reason. I don't see it on the wiring diagram.

That is correct. It came that way from GM. If I recall correctly mine was wrapped with electrical tape that started on the connector and went just far enough to cover whatever that is since the truck was new.

dmjlambert 11-26-2016 12:09 AM

Re: Electric connectors needed for 69 CST/10
 
Quote:

Originally Posted by 57taskforce (Post 7777957)
I most likely have what you need, may or may not have the compressor connector but I have the others.

Thanks very much, that sounds good. I'll PM you to discuss the details.

Quote:

Originally Posted by FirstOwner69 (Post 7777974)
That is correct. It came that way from GM. If I recall correctly mine was wrapped with electrical tape that started on the connector and went just far enough to cover whatever that is since the truck was new.

Thanks for that info. I think I'll take the duct tape off and clean it up and see what I can do about wrapping it properly. I just got a role of that non-adhesive black vinyl tape. That must be a flyback diode to reduce EMF and reduce arcing on the compressor switch.

57taskforce 11-26-2016 01:05 AM

Re: Electric connectors needed for 69 CST/10
 
Pm returned.


All times are GMT -4. The time now is 06:59 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com