The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Trucks For Sale (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=76)
-   -   NE 72 GMC Stepside Project (https://67-72chevytrucks.com/vboard/showthread.php?t=786959)

ne72gmc 05-16-2019 03:19 PM

72 GMC Stepside Project
 
5 Attachment(s)
Mostly everything sold, have a number of small parts, hardware and a few other parts.

PARTING OUT, so the truck is not for sale.

I began my project 2 years ago on the 72 GMC Stepside and made decent progress, but have got to the point that I don't have the time or funds to get it done. Selling this as a complete setup, and here is a summary of where it is:
  • In-line L6 250 Engine rebuilt professionally and painted
  • 3-speed (on the tree) tranny rebuilt and painted
  • Frame blasted and painted with KBS
  • Rear-end blasted and painted (currenty apart) and have a rebuild kit
  • Many new parts purchased (stainless brake lines, rear drum parts, new springs and shocks, new suspension bushings, etc
  • Intake/Exhaust manifolds were blasted and painted
  • 1BBL carb cleaned and rebuilt
  • Distributor cleaned and rebuilt (new cap, rotor, wires and plugs)
  • New fuel pump
  • New water pump
  • All bolts are in bags labeled
  • I have pictures of about everything as I took it apart (and put it back together)

Asking $5000 for everything, which seems like a bargain. Hopefully the pictures will help you show the attention to detail I was taking on every part (probably too much at times).

ne72gmc 05-21-2019 01:46 PM

Re: 72 GMC Stepside Project
 
ttt

72GreenMonster 07-10-2019 02:07 PM

Re: 72 GMC Stepside Project
 
Still for sale?

ne72gmc 07-10-2019 02:49 PM

Re: 72 GMC Stepside Project
 
Sorry, I decided to part it out, but the bulk of it is gone, I have the following left: 3-speed tranny, windows, wing windows, full set of new stainless steel brake lines and cables, steering column, some other new joint components, really nice steering wheel and other misc parts.

If you are interested in any of that, let me know.

Dirt's72 07-10-2019 07:42 PM

Re: 72 GMC Stepside Project
 
What color is the steering wheel? I saw your motor sale post for sale a while back and boy someone got a deal on that.

ne72gmc 07-10-2019 07:58 PM

Re: 72 GMC Stepside Project
 
The steering wheel is black. Yea, I lost a little on that deal...

Harleys 4 You 07-23-2019 10:54 PM

Re: 72 GMC Stepside Project
 
How much for all the parts?

ne72gmc 07-29-2019 08:31 AM

Re: 72 GMC Stepside Project
 
Sorry for the delay, below is what I have left, asking $1000 for everything.
  • 3-speed tranny
  • stainless steel brake lines and rear brake cables
  • 3-speed steering column
  • New Ball joints, u-joints, stainless steel brake lines and rear cables, rear drum rebuild parts and a few other misc parts
  • Drive shaft swb 2wd
  • Other misc parts


All times are GMT -4. The time now is 11:30 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com