|
Re: Buried to Bagged 1972 2wd
Rock on, David... :metal:
|
Re: Buried to Bagged 1972 2wd
Hahaha, thanks Heathro!!!:lol:
|
Re: Buried to Bagged 1972 2wd
1 Attachment(s)
Best of Show Car and Best of Show Truck. The last show Slick was in before her demise. I miss her. Shirts will be made with this picture on them for the Fall show this year, think I'll order about 5 of em.:waah:
Attachment 1402905 |
Re: Buried to Bagged 1972 2wd
3 Attachment(s)
This weekends progress was not too bad. After being concerned that I had not received all of my items from Porterbuilt I looked in every box, including the one that had been moved while the shop was being cleaned....and there it was. Duhhhh. At least I had all the parts needed to finish building the frame and to move on to the brakes. Whew!!
Attachment 1404779 Attachment 1404780 Attachment 1404781 |
Re: Buried to Bagged 1972 2wd
5 Attachment(s)
I took a few of the frame because it just looked awesome. :lol: The rotors are 14 inch with C5 Corvette calipers.
Attachment 1404782 Attachment 1404783 Attachment 1404784 Attachment 1404785 Attachment 1404786 |
Re: Buried to Bagged 1972 2wd
Full on badassness going on here!
|
Re: Buried to Bagged 1972 2wd
Looking great.
|
Re: Buried to Bagged 1972 2wd
Quote:
Quote:
|
Re: Buried to Bagged 1972 2wd
It looks like you were able to keep all of the Blazer body mounts. Is that correct?
|
Re: Buried to Bagged 1972 2wd
Quote:
|
Re: Buried to Bagged 1972 2wd
Looking real good!
|
Re: Buried to Bagged 1972 2wd
Blazer is looking good.
|
Re: Buried to Bagged 1972 2wd
what's with the lug nut holes on that rotor? they don't make a chevy 5 bolt pattern?
|
Re: Buried to Bagged 1972 2wd
Quote:
|
Re: Buried to Bagged 1972 2wd
A little update is due! I had a nice Memorial Day, thanks to all our veterans!! Hope you all did as well! I was able to get the front c-notches installed with some changes to the measurements I was provided from PB. I guess the 6.0 DM is situated a little further forward than past versions. After getting the notches in I was able to mount the rack and pinion, which fit well, and decided to mount the old rims and set it on the ground for the first time. :metal:
|
Re: Buried to Bagged 1972 2wd
5 Attachment(s)
Here are the pics!!!
The PO had torched holes in the frame that allowed it to crack, I cut the stiffener out and patched it and added a hump over that for strength. Attachment 1407776 Attachment 1407777 The measurements called for 4 1\8 but that wouldn't work with the new 6.0 version DM. Had to move it to 5 1/4 to centerline the notch. Attachment 1407778 As you can see in this pic, the bright white mark is way too far back so I double measured and put the rack and pinion in diagonally to check clearance. I had to move it up quite a bit! Attachment 1407779 Welded the notch in on the backside....don't laugh, I had forgotten to turn on the gas..... Attachment 1407780 |
Re: Buried to Bagged 1972 2wd
5 Attachment(s)
I used my new plasma cutter to cut the frame, love that tool!!! Very little grinding to get the notch in.
Attachment 1407787 Since I was having soooo much fun with the welder, I decided to triple weld the notches in on the outside. Attachment 1407788 Just so I could spend hours having fun grinding it down to make it look nice. Attachment 1407789 After drilling out the spindle tie rod holes I added the rack and pinion to the DM. Those 15 inch rims didn't leave much room for the 14 inch rotors!!! Had to pull the calipers off so they would fit..... Attachment 1407790 TOUCHDOWN!!!! I added the rearend to the frame and was able to lay it out on the shop floor!!!!!:metal::metal: Attachment 1407791 |
Re: Buried to Bagged 1972 2wd
5 Attachment(s)
Of course I was excited and couldn't get enough pics so here they are for you to check out!!! I'll shut up now, enjoy the pics!!:blah:
Attachment 1407794 Attachment 1407795 Attachment 1407796 Attachment 1407797 Attachment 1407798 |
Re: Buried to Bagged 1972 2wd
Looking good so far. I am in for the ride!
|
Re: Buried to Bagged 1972 2wd
This is looking awesome! I am digging the look of the new DM version 6..
I realize it's mockup phase and all, but just in case you missed it, I think on the Extreme Dropmembers the trailing arms need to be in the lowest mounting position on the cross member.. Keep up the good work.. |
Re: Buried to Bagged 1972 2wd
Quote:
Quote:
|
Re: Buried to Bagged 1972 2wd
Awesome progress on the chassis Slick! I'm digging all of it.
|
Re: Buried to Bagged 1972 2wd
Finally layin frame! Looks great, I know you're excited, I'm excited for ya.:metal:
I gotta try to swing by next Friday and see it in person. |
Re: Buried to Bagged 1972 2wd
Quote:
Quote:
|
Re: Buried to Bagged 1972 2wd
3 Attachment(s)
A small update for the week, but progress is progress!!! The frame is no longer swiss cheese, got a lot of the holes welded up. Also started to delete the holes in the firewall, it felt good to do something on the body. I do have full covers for the firewall so this is just practice. Slosh Tubz sales smooth firewall panels if you didn't know!! I'm sure Mike Losh would be happy to hook ya up!! (Shameless plug) :lol:
Attachment 1410256 Attachment 1410257 Attachment 1410258 |
| All times are GMT -4. The time now is 03:03 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com