New Guy outside Philly
Just paid my dues finally, busy building my Jimmy is my excuse.
I joined pretty much for your parts board and good conversation going on, everyone seems friendly. My present project is '72 GMC Jimmy, I paid $700 for it and it had a lot of rust. My son and I just finished up drivers side with about 10 patch panels and floorboard. Nice to have a solid floor again! The whole thing has been apart except cowl, bedsides and suspension. PO did a 4" lift. Spent most of my money so far on reproduction pieces to make it look original. Seats are the only thing not orig. The part that is different with this project is that I put a wood bed in it. I guess I will get hammered from the purist but I like it. So far it is a 350/350 NP205 373s w/31s Factory Ralleye Wheels. Engine has been degreasd since PO had Valve Covers on upside down and pumping gas into engine crankcase, talk about coked up! Added Quadrajet and Edlebrook manifold. Old school finned V/C w/ corvette script. 2pc. Cloyes timing chain cover and roller timing chain, with new gears. Old set had chipped plastic teeth and was running on some of the alum. teeth. No wonder I couldn't time it! 7 qt. oil pan w/ high volume pump. Urethane motor mounts as the orig. ones were in 2 pcs. Lokar throttle and kickdown cable, old one wasn't hooked up. New repro. doors and entire grille area. New dash panel w/tach and vacuum gauge. Just bought a tilt column thru your parts board. B&M shifter. Left to do: Exhaust System, flowmasters w/catalytic converter and put the front end on again. Near future to be done: doubler w/ triple stick Well I guess I've bored you long enough with my rantings, promise my posts won't be this long, just wanted to introduce my truck. Thanks for your time, Jim |
Re: New Guy outside Philly
Welcome! Got Any progress pics to post up? Sounds like its gonna be a wicked Jimmy!
|
Re: New Guy outside Philly
thanks for the support jaros44, its appreciated. Never be afraid of rambling in posts.. we all love seeing progress posts. Welcome aboard ( a few months late on my part ;) )
|
Re: New Guy outside Philly
Welcome to the board! Post some pics!
|
Re: New Guy outside Philly
Welcome to the board
|
Re: New Guy outside Philly
Thanks guys and gal. You people are very cordial, unlike another site. I guess I'll have to go out and buy a camera, since you say " this post is worthless without pics".
It's been a 4 year project and can't wait for it to end, I was just going to get it running... Jim |
Re: New Guy outside Philly
:welcome2: From West TN :hi2:
|
Re: New Guy outside Philly
Welcome to the board from Western Kentucky.
|
Re: New Guy outside Philly
OK bought a camera last night, downloaded to docs., joined photo bucket, now how do I attach to post? Jim
|
Re: New Guy outside Philly
|
Re: New Guy outside Philly
Welcome from Levittown (outside Philly)!! Where outside Philly are you?
Looks like you project is coming out good! Mike |
Re: New Guy outside Philly
Quote:
|
Re: New Guy outside Philly
welcome from houston. I live in Croyden Pa for a while
|
Re: New Guy outside Philly
Quote:
|
Re: New Guy outside Philly
Hey Jim-
Welcome from SD! I really like the looks of that wood floor, man! If the floor was rusted out in my 70 I sure would consider replacing it like you did. Keep the pics comin! Later---DAC |
Re: New Guy outside Philly
Quote:
|
Re: New Guy outside Philly
Quote:
Mike |
Re: New Guy outside Philly
:crazy: I think I sobered up. They do have some good local bars. I got tired of all them damn Geese to.:lol:
Quote:
|
Re: New Guy outside Philly
Quote:
I'm supposed to do a FAQ on the wood bed. Thanks for the comps! |
Re: New Guy outside Philly
Welcome from Mountaintop Pa
I'm trying to get back into the pre 72's. Good to know folks close by. bob |
Re: New Guy outside Philly
Quote:
|
Re: New Guy outside Philly
:hi2: and :welcome2: from San Antonio, Texas.
|
Re: New Guy outside Philly
:welcome2: to the board from KY!!!!
|
Re: New Guy outside Philly
Thanks guys, you people sure make a person feel welcome.
|
Re: New Guy outside Philly
welcome from warrington pa!
|
All times are GMT -4. The time now is 02:50 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com