Re: Restoring Rusty
Yes this Clown act did get this side off by himself, it can be done fellars! |
Re: Restoring Rusty
5 Attachment(s)
so after dinner we pressed on and got the passenger side wheel housing off, this side is rusty but solid, man that metal is so thick, it is awesome good ol' AMERICAN steel, we may not need the donor for this side
|
Re: Restoring Rusty
1 Attachment(s)
and then the unthinkable happened we ran out of beer, and we had to stop for the night, so here I am drinking my wifes' white wine as I type this, don't you dare judge me, or there won't be any future updates ~ JK
|
Re: Restoring Rusty
Quote:
Mostly it depends on whether or not I have had to do something on my own truck. If not, I only know what I've read. Glad I got the info to you in time for you to use it! |
Re: Restoring Rusty
Wow, lots of work done there! Are you going to paint the bedsides while it's all apart? And how are you going to re-weld the joints you ground out?
Believe it or not, my original bed floor looked worse than yours. |
Re: Restoring Rusty
Quote:
Quote:
Quote:
|
Re: Restoring Rusty
I painted the bottom of my bed with some cheapo silver.
makes working underneath more pleasant. |
Re: Restoring Rusty
Wow, I would have tried to find another bed.
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
1 Attachment(s)
picked up where we left off last night, on the passenger side we must unscrew the fuel tank filler tube from the side of the bed
|
Re: Restoring Rusty
2 Attachment(s)
once again we cut off the rear post by the tailgate from the floor of the bed
|
Re: Restoring Rusty
4 Attachment(s)
and thirty bolts later we got ourselves a flat bed, lol
|
Re: Restoring Rusty
4 Attachment(s)
after using a wire brush on the threads of the eight long bolts that hold the bed to the frame and lubing them up, we used a cheater bar on the end of a ratchet for more leverage, that plus fines not gorilla tactics and we were able to unbolt them all
note the one super long bolt on the driver's side by the cab |
Re: Restoring Rusty
1 Attachment(s)
don't forget the tailight wiring harness before you go yankin' the bed floor off the truck
|
Re: Restoring Rusty
4 Attachment(s)
and large bolts later we had ourselves a Dump Truck
|
Re: Restoring Rusty
2 Attachment(s)
now we could remove the piece by the cab, again the whole point of taking it off piece by piece is so that one man doesn't have to lift 5,000 lbs
the bottom of the piece looks worse than it is, it is very solid, so a few minutes with a wire wheel and it should shine |
Re: Restoring Rusty
4 Attachment(s)
then it was just a matter of putting on some hefty gloves, standing up on the frame, and lifting the rusty bed floor off the frame and leaning it against the wall of the garage
|
Re: Restoring Rusty
2 Attachment(s)
man I waited 10 months to see this, looks kinda funny Rusty with his pants off
|
Re: Restoring Rusty
4 Attachment(s)
then it was time to have some fun !!!
... and bye bye |
Re: Restoring Rusty
1 Attachment(s)
other duties as required, (some say it's what I do best)
|
Re: Restoring Rusty
1 Attachment(s)
ah yes, a clean canvas
|
Re: Restoring Rusty
1 Attachment(s)
lets bring in the new patient...
for $40 bucks what did you expect, but I think we can make this turd shine, its a little wavy but it's solid |
Re: Restoring Rusty
5 Attachment(s)
time to meet the replacement twins
anybody know if there is a right and a left one, I think my original driver side one is passed it and the replacement one has a hole in it that the guy who sold it to me cut out for the trailer wiring harness |
Re: Restoring Rusty
2 Attachment(s)
just some wheel housings out in the pasture gettin' cleaned up
|
Re: Restoring Rusty
Hey, it's the return of Dusty. :lol:
You should slap some paint on that chassis while you have such good access. Might want to change the diff lube too, because it's easy with no bed in the way. |
All times are GMT -4. The time now is 01:21 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com