flowtech headers
 

i bought a set of painted flowtech headers (because there cheap) they went on fairly well with only slight hammer work needed on the passenger side near the motor tower.....


------------------
My Truck pictures

www.xframeimpala.com

68 4x4 short fleetside 327 CH465 edelbrock intake and carb MSD distributor its the "SHAGROLET"
56 big window short stepside 235 dual 1 brls
64ImpalaSS 327
70 C10 LWB fleetside custom/10 350/TH350
IM me on aol SN= SHAGROLET

Was this on a 4wd? I'm always looking for feedback on any type of speed/performance or general engine product. Helps out a lot at work. Were you satisfied with the fit and finish? Most people have been more than happy with the Flowtechs we sell at work.

------------------
1968 Chevy C-10, 2wd, wood bed, 327 w/Vortec heads, 600 cfm Holley 4-bbl, Edelbrock Performer RPM, HEI,3-spd stick.

COMING SOON: (or not so soon) 383, auto, discs, and Prostars.

nope, on my 2wd, the fit was good..... the finish is wearing off.... but there as good as i expected for 80 bucks

------------------
My Truck pictures

www.xframeimpala.com

68 4x4 short fleetside 327 CH465 edelbrock intake and carb MSD distributor its the "SHAGROLET"
56 big window short stepside 235 dual 1 brls
64ImpalaSS 327
70 C10 LWB fleetside custom/10 350/TH350
IM me on aol SN= SHAGROLET

My brother has a set on my old malibu, he had painted them out of the box and they are still holding up well..not sure how long he had them on but I heard no complaints yet.

------------------
Displaced Canadian in Monterey California
1970 K10, 327 HEI, 4spd. 3.73's NP205 33"BFG Mud Terrains Edelbrock Intake and carb. 12 bolt rear,dana 44 front with disk brakes

Good, info! Hey Impala, how low do they hang?

there full length so they do hang pretty low... the collecters are maybe just a tiny bit lower than the a arms in one spot..... my trucks stock height so i wasnt worried about that

------------------
My Truck pictures

www.xframeimpala.com

68 4x4 short fleetside 327 CH465 edelbrock intake and carb MSD distributor its the "SHAGROLET"
56 big window short stepside 235 dual 1 brls
64ImpalaSS 327
70 C10 LWB fleetside custom/10 350/TH350
IM me on aol SN= SHAGROLET

I've lowered mine three inches, I may use shorties. Thanks!

yes id use shortys if it was lowered scraping collecters dosnt sound good!

------------------
My Truck pictures

www.xframeimpala.com

68 4x4 short fleetside 327 CH465 edelbrock intake and carb MSD distributor its the "SHAGROLET"
56 big window short stepside 235 dual 1 brls
64ImpalaSS 327
70 C10 LWB fleetside custom/10 350/TH350
IM me on aol SN= SHAGROLET

just bought a set of doug thorley headers for 100.00, they are the 300y so I do have to fit them a little, but have been told they are a very good header.

------------------