1964 GMC 4X4 Longbed
5 Attachment(s)
Hey folks, I'm new to the forum here and I'm currently in the process of restoring a 1964 GMC factory 4WD fleetside longbed. I'll try to keep up with posting progress as it goes along.
Little background on the truck.... I am about the 4th owner. The last two I know of were from town. It was mainly used as a plow truck for years until a friend of my fathers bought it around 2004. He had plans to restore but didn't have the time. Over this past winter I was thinking about buying or restoring another truck and decided on this one. It's in rough shape, but I know I'll be able to bring it back. When I do restorations (mainly tractors) I've always been one for stock look or darn close to it. So this what I'll be doing for the '64. Still up in the air whether to go chrome again or the standard white. I've been reading through the FAQ index for the past week or so, but still have a couple questions to ask and figured you guys should be able to answer them, seems to be more info on the Chevys than GMC... 1. Would my truck originally have come with hub caps? I can't seem to find any pictures of 4WD trucks after '63 with them. 2. The original split rims were removed long ago, were they 16's or 16.5. I have a nice set of 16.5 with mud and snow tires that I'm thinking of using on the truck. 3. Does anyone have the paint code for the original interior color? I'd assume it's the same as Chevy.... That's all I can think of for now, I'm sure there will be more down the road! Here's some pictures. Videos on my YT page- 5Tractorguy Attachment 1415170 Attachment 1415171 Attachment 1415172 Attachment 1415173 Attachment 1415174 |
Re: 1964 GMC 4X4 Longbed
5 Attachment(s)
|
Re: 1964 GMC 4X4 Longbed
3 Attachment(s)
And more... Parts trucks. Blue '66 4WD 1/2 ton, maroon '64.
Attachment 1415185 Attachment 1415186 Attachment 1415187 |
Re: 1964 GMC 4X4 Longbed
|
Re: 1964 GMC 4X4 Longbed
Im in to see this build ,its going to be fun .And by the way if you want to sell a license plate off of it I would be interested .
|
Re: 1964 GMC 4X4 Longbed
Welcome to the forum and it looks like you have a nice optioned truck with custom trim, emergency flasher and power brakes. I think that no 64-66 gmc 4x4's came with hubcaps (but you could add them). Could you post a better pic of the gauges in the dash? If they are the oil pressure and ammeter gauges they could be factory options as well.
|
Re: 1964 GMC 4X4 Longbed
Welcome to the forum! Love the GMC 4x4's. My truck has the same Northeast plow history. You've got some nice trim on that truck, I'd be inclined to go with chrome but the white will be a lot cheaper. I'll enjoy watching your build!
|
Re: 1964 GMC 4X4 Longbed
Wow KOOL truck power steering and power brakes, and 4x4 to boot, I'm Subscribed... and 3/4 ton....
|
Re: 1964 GMC 4X4 Longbed
3 Attachment(s)
Quote:
Quote:
Quote:
Attachment 1415274 Attachment 1415275 Attachment 1415276 |
Re: 1964 GMC 4X4 Longbed
Thought I recognized that name!!! I been watchin you on youtube! :metal: Great to see ya found out about this forum. I'm in! I have a 64 GMC 1500 with a 305E I'm having fun with myself. So far I have put a 600 edelbrock 4 barrel on the beast. Too much torque now. haha
|
Re: 1964 GMC 4X4 Longbed
Gotta love the washtub to keep rain out of the engine.:) I'm currently doing a 250 six/manual trans to 350/TH350 swap on the wrong side (outside) of my garage, so I can appreciate what you're dealing with. Thank goodness mine's on pavement, and the garage is in the back so the neighbors don't complain. That's me on the right.
http://pic100.picturetrail.com/VOL38.../411381204.jpg |
Re: 1964 GMC 4X4 Longbed
5 Attachment(s)
Quote:
Quote:
Finally got things rolling today on the cab. (I'm using the cab off the maroon parts truck and the gold Chevy cab for parts). Cut out a section of the drivers side floor along with rockers. Tacked in floor patch, cut door post to fit new piece and cut out for kick panel. My dad found some rust inhibitor stuff in a spray can that is supposed to be very good (it's a 2 part), and it came with a 18" wand. So I sprayed all up inside the door post to try and stem the rust. When the roof comes off for repair I'll spray the top half of the post. Attachment 1415536 Attachment 1415537 Attachment 1415539 Attachment 1415538 Attachment 1415540 |
Re: 1964 GMC 4X4 Longbed
I'm amazed at what you're doing to the cab. I'd be overwhelmed, and wouldn't know where to start!
|
Re: 1964 GMC 4X4 Longbed
Great work on fixin that cab! :gmc2:
|
Re: 1964 GMC 4X4 Longbed
Cool project! Looks a lot like what I started with when I got Big Ugly. These old trucks sure did get beating!
|
Re: 1964 GMC 4X4 Longbed
looks like a fun build =0) and welcome to the show ...
|
Re: 1964 GMC 4X4 Longbed
Pretty sweet!
|
Re: 1964 GMC 4X4 Longbed
Great looking projects and nice progress so far!!!!
|
Re: 1964 GMC 4X4 Longbed
looks like you have enough parts to build with. And i thought my cab rockers was bad lol. As argonuat says these tk's were well used and abused. there wasn't a panel on mine that didn't have a dent, still have waves and some dents haha.----have fun with your build.
|
Re: 1964 GMC 4X4 Longbed
4 Attachment(s)
Got some more done on the cab yesterday. Finished tacking up the drivers side kick panel and door post. Then began removing the rocker from the passenger side. Didn't get as much done as I wanted to but at least it's still moving along!
Attachment 1417687 Attachment 1417688 Attachment 1417689 Attachment 1417690 |
Re: 1964 GMC 4X4 Longbed
I'd go insane with all that rot. Nice work!
|
Re: 1964 GMC 4X4 Longbed
3 Attachment(s)
Alright, long time no post! Had a busy month or so with tractor shows and side work. So the cab has been moving along slowly. As of now both sides have had the door post, kick panels, and floors completed. I'm working on the bracing on the underside now, that will be going back on this week. I pulled it off so I could replace that strip that runs along the bottom edge of the cab, there was a lot of blistered rust behind it.
Attachment 1436302 Attachment 1436303 Attachment 1436304 |
Re: 1964 GMC 4X4 Longbed
Looking great, I'm in
|
Re: 1964 GMC 4X4 Longbed
Nice work!
|
Re: 1964 GMC 4X4 Longbed
5 Attachment(s)
More progress!
All the bracing is back together on the bottom of the cab. I also made a frame for it to sit on so we can move it around and flip it. Now that it's back into position the roof has been pulled along with the firewall. I spent the past two weeks concentrating on the front where the firewall goes. Did a lot of patch work around the vent bucket holes and made a new top lip where it spot welds together. Got that all ground smooth after work today, still have to knock some of the metal flat in that area. Next I'll be fixing the firewall from the Chevy donor cab. I need to weld new bottoms to each side where it attaches to the floor and cut out for the 4WD hump. Then onto the roof. All the bracing on top of the door posts has to be done, the top door jamb on the passenger side (taking off Chevy cab), and the front windshield-to-roof lip, that piece I ordered new. Let me tell ya, you southern/west coast guys on here who complain about cab rust and rot have a cake walk compared to what this cab has been!! :) Nothing like some good 'ol northern road salt.... Attachment 1449131 Attachment 1449132 Attachment 1449133 Attachment 1449134 Attachment 1449135 |
All times are GMT -4. The time now is 12:40 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com