Re: Restoring Rusty
1 Attachment(s)
Truck doing more truck things, scored a heavy duty shelf for all our camping gear
OMG Greg are you going to share pics of every time you use the truck? Well duh, yeah!!! JK, ha ha |
Re: Restoring Rusty
1 Attachment(s)
By the way the Safari web browser stinks on the iPhone for forum updates, it only uploads one pic at a time and if you try to upload multiple pics the last one wins and if later you wanna add a second pic it will just replace the first, epic fail
|
Re: Restoring Rusty
Quote:
you can just make out the exhaust in front of the rear tire. the plus side is the small (short) cars really love it at the stop lights...i think lol http://i188.photobucket.com/albums/z...b/DSCF7722.jpg |
Re: Restoring Rusty
just my personal opinion that your drone is caused by dumping the exhaust under the truck. mine droned with the previous exhaust. which was stock manifolds, 2.25 pipe and cheap turbo mufflers dumped in front of the axle. didn't want to spend 150 bucks on the pipes to go over the rear axle so turned mine out the sides.
|
Re: Restoring Rusty
Quote:
um lets get those windshield wipers blacked out please - ha ha |
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
I agree if your exhaust is dumped under the bed before I swapped mufflers I be getting tailpipes and getting it to exit.
my dad has a c30 dump. had dumped exhausted ending right before the rear axle for 20+ years. was just LOUD. not even good loud just loud. I swapped a pair of cheapo summit mufflers (think they cost $30 each) and put the exits in front of the back tires. He get complements everywhere he goes now on how awesome the truck sounds. |
Re: Restoring Rusty
my sounded terrible until I went with the full exaust
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
3 Attachment(s)
thought I would share a pic of a cool cut away of a Flowmaster muffler I saw today at a Hot Rod store while picking up some 90° elbows for my side exits
the flow is right to left <== [all together now], ahh that's how you make the drone sound LOL |
Re: Restoring Rusty
4 Attachment(s)
alright lets give the side exits a shot to see if that drowns out the drone
so the passenger side first - here it goes |
Re: Restoring Rusty
Is that hot rod store Tognotti's?
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
I miss going there. Stuck in socal now a desert wasteland
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
2 Attachment(s)
why don't you all grab a beer and follow me to my metal shop and we can take a look at the new and improved side exhaust Flow-a-Masters
took no time at all to cut the down pipes off and weld up some of these 90° elbows now we are able to spew Carbon Monoxide at two Priuses at the same time whilst stopped at a red light - what's not to like So is the drone gone? No not all the way gone but believe it or not its better, technically the drone used to be at 1000 RPM and now its at around 800 RPM (this is better on cold starts since with fast idle on your head was a poundin' till the rig warmed up) so in the pics you can't really tell but they go out to the side and are angled a little bit down |
Re: Restoring Rusty
1 Attachment(s)
not a huge fan of the Felpro header collector white gaskets, this one parished after only a couple hundred miles of service, now I aint sure if its by design that they are supposed to get this brittle after heating up, or cause its that they've been sitting on the O'Really's shelf since the Pilgrims brought them over on the Mayflower
|
Re: Restoring Rusty
2 Attachment(s)
got my new digital vacuum gauge installed and protected with an inline 2A amp fuseloge
love seeing it go from 16" at idle to 0" at Wide Open throttle to 23" of vacuum at off throttle while cruising |
Re: Restoring Rusty
Hey Greg. You know any exhaust system changes call for the obligatory sound clip right? ;)
And I have been thinking I might like to have a a/f meter for tuning. That's the first one in cab I've seen. |
Re: Restoring Rusty
Quote:
Quote:
|
Re: Restoring Rusty - Manual Steering Box Rebuild
2 Attachment(s)
the manual steering box rebuild kit arrived so it was time to git er done
|
Re: Restoring Rusty
2 Attachment(s)
I figured I can delay it some more by doing whats completely un necessary...
come on we've all been there time to remove the casting crests (those of you who followed along the engine rebuild know I did this to the block as well) you know those SEMA judges, picky picky - ha ha |
Re: Restoring Rusty
2 Attachment(s)
this is the part that hugs the frame rail, no one will ever see this side, awesome, time well spent Greg
|
Re: Restoring Rusty
2 Attachment(s)
I mean come on guys looks like GM had Ray Charles in charge of the Casting Quality Control (no offense to Charles he probably would have felt the imperfections and had them fixed...)
|
Re: Restoring Rusty
1 Attachment(s)
I can't find the before pic of this angle / shot, but you get the idea it was wonky too, look like they had Ogur break the metal with his hands rather than use a hack saw, ha ha
no wonder they could crank out half a million of these trucks a year back then, their standards were "Eh Good Enuff' IT'S A TRUCK!!! |
All times are GMT -4. The time now is 11:15 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com