Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
2 Attachment(s)
so lets get you updated Greggie style
hello old friend |
Re: Restoring Rusty
2 Attachment(s)
the goal for today was to replace the headers with manifolds (or at least on the problem side) and although we thought we found the smoking gun (pun?) we did not want to change horses midstream sorta speak
so first we had to knock the ugly off that log 7 minutes with the death wheel and she was naked, and I'll be lying to you all if I didn't tell you that I considered grinding her nice and smooth for a minute, but then I went and got a beer instead |
Re: Restoring Rusty
1 Attachment(s)
although I went a lookin' for somethin' fancier than these trusty ol three piece Felpro gaskets I didn't find nothing better, and they've been good to me in the past
|
Re: Restoring Rusty
3 Attachment(s)
On in 90 Seconds
I kid you not brothers and sisters, manifolds are sooooo easy to work with, but you already know that, so I must admit: headers are a young mens' sport. |
Re: Restoring Rusty
quit drawing this out, did going back to manifolds get rid of your engine ticking sound or not?
Hewk yeah it did, NMFT! No More Frustrating Ticking |
Re: Restoring Rusty
2 Attachment(s)
so there was no more ticking sound but the truck sure did sound funny with headers and a Flowmaster on one side and an exhaust manifold and a Turbo muffler on the other, there sure is a difference in sound between the two sides that's fer sure, and I won't tell you I may could have liked the sound on the manifold side, since I must justify my header expenditure, ha ha
so back to the parts house I went looking for some crusher gaskets, only to come away with these beauties that set me back $35 bones how in the world they is reusable I'll never know so did I put them on? Um no! wait what? I wanted to put them on, but those Felpro manifold gaskets were stuck to the enjin block and I didn't feel like scraping brand new gaskits off, then and there, so I said what the hewk lets give them a go with these them headers, and guess what they worked beautifully, SNMFT - Still No More Frustrating Ticking so overall it was a good day, I fixed my truck, and my countrymen beat North Ireland in an Euro Cup 2016 match, what? you don't pretend to be a soccer fan every 4 years weather you need to or not? |
Re: Restoring Rusty
Wait a minute...
Houston... we have a problem! The engine runs so smooth now I can hear the PCV valve ratlin'!!! ha ha ha, no for real |
Re: Restoring Rusty
Good job, I bet you're exhausted!
|
Re: Restoring Rusty
http://67-72chevytrucks.com/vboard/a...1&d=1465770796
Looks like a gasket problem, not a header problem. Round port gaskets may have corrected that leak. |
Re: Restoring Rusty
It's amazing how much an exhaust leak sounds like mechanical ticking.
Wonder if there is a way to record the sound with a smartphone, then analyze the sound file to see if it is an exhaust leak or a mechanical ticking. |
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
Quote:
Quote:
thank you all for your help and not giving up on Rusty |
Re: Restoring Rusty
FYI... Don't let the PCV valve rattle you. Rich may have a better idea but the second I through my cam into my truck I could always hear a slight rattle from it.
Different vacuum levels make it rattle and there are different valves you could try but I never bothered. |
Re: Restoring Rusty
Finally.
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
5 Attachment(s)
~ P A R T S ~
whoa, wait what? Seriously, you sure don't waste any time Greg but whacha gone out and git a new distributor for? well I got it on the account of the engine ticking noise, I thought it be comin' from that cheap Proform distributor I gone out and got last year (now in all fairness Proform makes a $100 HEI distributor and a $150 HEI distributor, and you can guess which one I bought, the cheaper one) now this here is a genuine GM Chevrolet Performance High Fidelity awesome possume High Energy Ignition part number: nine three four four zero eight zero six |
Re: Restoring Rusty
2 Attachment(s)
one thing I is a learned is that cheap parts seldom come with Specs where as good parts come with all sorts of words and numbers, case in point:
Mechanical Advance: - - - - - - - - - - - - - Vacuum Advance: RPM - - - - - Advance - - - - - - - - - - Vacuum (in. Hg) - - - - - Advance 1100 - - - - - - 00.0º - - - - - - - - - - - - - - - 3.00” - - - - - - - - - - 00.0º 1600 - - - - - - 12.0° - - - - - - - - - - - - - - - 7.50” - - - - - - - - - - 20.0º 2400 - - - - - - 16.0º 4600 - - - - - - 22.0º |
Re: Restoring Rusty
4 Attachment(s)
what do you mean you don't rip apart your brand new parts when you acquire them Lonnie Earl?
note the numbers on the weights, the center plate, and the vacuum advance I have no idear what they mean, but I'm sure glad they is there, ha ha |
Re: Restoring Rusty
Quote:
600rpm idle. Rotates 10 times per second. Fires 5 times per second..... Hmmmmm..... |
Re: Restoring Rusty
Quote:
20* of vac advance. That's crankshaft degrees. So 10 camshaft degrees at 7.5", starting from 0* at 3". That's a lot of vac advance at pretty low vacuum for what you got there in a non-pollution-equipped engine. What was your idle vacuum again? My concern is that without a very conservative (pollution-era) base timing in the 4* BTDC range, you are going to ping like crazy, because you will need to get into a LOT of pedal to get out of vacuum advance. Better fit for what you are running is probably the AR23 can: 7.5 camshaft degrees at 11.5", starting from 0* at 6". OK, so, timing. You want 36* total, base+mech. With 22* (at 4600!), you want 14* base timing. But 36* total plus 20* vacuum advance gives 56* at cruise with it all in. You want to be around 52* with it all in, not more. So you need to back off to about 10* base timing so as not to go over 52* at cruise. And I am worried with as low a vacuum as that can pulls in, you'll ping even at that. Switch to an AR23, and 36* total plus 15* vacuum gives 51*, so you're good with a 14* base timing. Which will give you more goose when you get on it. And no pinging. The AR23 can be hard to find, and so can the Echlin VC1853 equivalent. Here are the other listed equivalents: AIRTEX 4V1054 CARQUEST 57-7563 WELLS DV1853 GM 19138053 GM 1973482 ACDelco D1321A |
Re: Restoring Rusty
350HO Deluxe Engine (19210008) Specifications
Specifications Part Number 12487544 Set spark timing at 32º before top dead center (BTDC) at 4000 RPM with the vacuum advance line to the distributor disconnected and plugged. This setting will produce 32º of total advance at wide open throttle (WOT). The HEI vacuum advance canister should remain disconnected. This engine is designed to operate using only the internal centrifugal advance to achieve the correct timing curve. |
Re: Restoring Rusty
I'm glad you fellas understand all this. I'm still scratching my head. Lol
|
Re: Restoring Rusty
You want to use vacuum advance, just not that much. Limit the travel with a stop plate. I trim down old feeler gauges and spot weld them with a mig.
Around .120 pin travel usually equates to about 12º |
All times are GMT -4. The time now is 10:58 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com