Re: Restoring Rusty
1 Attachment(s)
get steel braided lines they said
|
Re: Restoring Rusty
2 Attachment(s)
so a quick unleaded bath later and the new replacement fuel line from the fuel filter to the fuel rail was in and we was as good as new, all in the driveway mind you, take that HOA
Note the heat shield, yup that's how we do |
Re: Restoring Rusty
Nice! I remember the show car era were guys were putting that stuff everywhere. I think it does look cool in limited, purposeful quantities. Keeping Rusty tip-top, I like it.
|
Re: Restoring Rusty
3 Attachment(s)
alright guys, I figure I'll give you an update on the seat, can you believe I dropped it off 6 weeks ago today
so just want to say that when I drop something off at a shop I politely ask them when they think it will be done, than times that by two, carry the 1, and multiply by the circumference of the earth, ha ha no my point is I don't nag them, I don't call them, I wait well a few weeks ago Dale texted me and said they could not remove the rusty bolts to free the back rest from the bottom portion, I suggested he just drill them out well six weeks later and they still haven't gotten the seat apart and have not even started on it |
Re: Restoring Rusty
I,m doing the waiting game on getting my rearend done, I told him take your time. He is.
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
It may be time to find a different upholstery shop.
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
I did mine and wasn,t hard. I,ve saved some pics and can tell you what to buy and what you need for a household sewing to make it work
|
Re: Restoring Rusty
"I,m doing the waiting game on getting my rearend done."
I learned never to say THAT either. |
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
Quote:
https://www.youtube.com/watch?v=CamnznmHZDA |
Re: Restoring Rusty
1 Attachment(s)
If you can run a scroll saw you can run a sewing machine. It takes similar hand-eye coordination.
You can get older Singer and other machines that sew 4 & 5 layers of heavy fabric with care. It just depends on what Household sewing machine you're talking about. I've sewed 4 layers of Upholstery and French seams in Denim fabric on a 1948 Singer 201-2. This is not a treadle machine but it is built like a tank. Attachment 2058900 |
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
4 Attachment(s)
so gentlemen The Greg picked up the seat today (unfinished, not even started), and I know these guys are not machinists but having gotten 2 of the 4 bolts out already I thought they would put in a bit more effort in six weeks for $650 bucks, especially since they only got hung up on one bolt
oh well, take a look at the pics and let me know your thoughts, I am a bit disappointed, the one time I counted on someone else to come through for me, a specialist, and it sort of makes me feel good about all the stuff I just went on and done did myself |
Re: Restoring Rusty
I'll bet they didn't want to do the work. Instead of jumping at the challenge, they kept putting it aside. That is why before the end of 2021 that place will be called "Ralph's (Formerly Dan's) Scott's Upholstery".
|
Re: Restoring Rusty
Quote:
you're hired ! |
Re: Restoring Rusty
2 Attachment(s)
Fender Fluid Leak?
|
Re: Restoring Rusty
2 Attachment(s)
Gentlemen, and Ladies, it's been a while since I reported so let me give you a little back story on this
since the LS enjin swap the truck has been ronnin' like a beast, it's not uncommon to get complements on it or offers of fist full of rolled up cash from drug dealers at the gas station (true story) anywho I'm approaching 50 so I go in to get a follow up CAT scan for one of my kidneys on Monday and for those of you who have not had the pleasure of getting this test, they pump you up with some cold fluid that I kid you not makes your anus tingle and makes you wanna pee like you were at a middle of a Greatful Dead concert during one of their never ending jams and had to go soooo bad anyway I leave the appointment and I just want to take a leak, well my truck decided to do it for me, it just dumped a puddle of fresh red fluid on the hospitals parking lot good news - my test turned out completely normal bad news - I caught every single darn red light trying to limp Rusty home !!!! |
Re: Restoring Rusty
2 Attachment(s)
well when I get home I have a Zoom work meeting and then it thunders and starts hailing, then it rains off and on for two days, yeah, trans fluid and rain water make for a nice driveway
so this is the second time this Amazon stainless steel braided hose has failed on me, once for the high pressure fuel line and now this gentle bend for the tans fluid line, I'm done with it, and just ordered this one from Summit https://www.summitracing.com/parts/sum-230620 |
Re: Restoring Rusty
Bro, sorry to hear about your plumbing issues. I'm concerned about Rusty's as well. I appreciate the warning on Amazon braided stainless. Do you remember the cost, compared to Summit's offering? I confess to being an avid bargain-hunter but am revising that perspective to looking for good prices on domestic products when possible.
Glad your kidneys checked out good. And you might want to stop shopping for gas with drug dealers. Just a thought. |
Re: Restoring Rusty
Glad you and Rusty are back!!! I bought some black braided line from Amazon. I better keep an eye on that. I’m even more glad that your health checked out fine.
|
All times are GMT -4. The time now is 12:21 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com