The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Blazer and Suburban Stuff (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=199)
-   -   NE Parting 1970 suburban (https://67-72chevytrucks.com/vboard/showthread.php?t=833648)

402Bowtie 04-20-2022 08:44 PM

Parting 1970 suburban
 
5 Attachment(s)
1970 suburban. No engine or trans.

Auto steering column - $100 (doesn't include steering wheel unless picked up in person). Located in Denver.

Radio - not sure if it works. $45

Front passenger door - Doesn't include door panel or wing window. $25 no shipping.

Third door - $250 no shipping. Located in Denver.

Green driver door - $300 no shipping. SOLD

Front blue driver door - $75 no shipping. See posts 45 and 46 for more pics. Located in Denver.SOLD

Rear barn doors - $200 each. Located in Denver. Sold

Ask me if you're interested in something else or the whole thing.



All prices plus shipping. Unless otherwise stated, the parts are located near Spalding, NE. I could potentially deliver to Denver or along the way.

402Bowtie 04-20-2022 08:45 PM

Re: Parting 1970 suburban
 
5 Attachment(s)
More

402Bowtie 04-20-2022 08:47 PM

Re: Parting 1970 suburban
 
5 Attachment(s)
Cowl and dodge grille not for sale

71K5Randy 04-20-2022 11:16 PM

Re: Parting 1970 suburban
 
Hi, I’m interested in the blue interior parts - door panels, arm rests, seat belt parts (especially anchor covers), etc.

71K5Randy 04-20-2022 11:21 PM

Re: Parting 1970 suburban
 
Also how are the rear side panels? How is the upper side panel chrome trim?

402Bowtie 04-20-2022 11:21 PM

Re: Parting 1970 suburban
 
Quote:

Originally Posted by 71K5Randy (Post 9069855)
Hi, I’m interested in the blue interior parts - door panels, arm rests, seat belt parts (especially anchor covers), etc.

Ok, I'm not entirely sure what I have. I know some of those parts I took out and put in storage. I can get you more info by Sunday night.

402Bowtie 04-20-2022 11:26 PM

Re: Parting 1970 suburban
 
Quote:

Originally Posted by 71K5Randy (Post 9069857)
Also how are the rear side panels? How is the upper side panel chrome trim?

I can answer that Sunday too. I do have another set of rear blue panels at my house too. I'll get pics of those tomorrow.

71K5Randy 04-20-2022 11:28 PM

Re: Parting 1970 suburban
 
How is the step up panel between middle row floor pan and the cargo area? Mine has rust through on both ends.

titospecial 04-20-2022 11:59 PM

Re: Parting 1970 suburban
 
Interested in the steering column

402Bowtie 04-21-2022 12:17 AM

Re: Parting 1970 suburban
 
Quote:

Originally Posted by 71K5Randy (Post 9069862)
How is the step up panel between middle row floor pan and the cargo area? Mine has rust through on both ends.

I'll check that Sunday.

Quote:

Originally Posted by titospecial (Post 9069876)
Interested in the steering column

Any questions? What's your zip code? I'll get shipping quote.

Getter-Done 04-21-2022 06:29 AM

Re: Parting 1970 suburban
 
Interested in Third door hinges unless they go with the door.
Also 4th door Regulator,

402Bowtie 04-21-2022 11:18 AM

Re: Parting 1970 suburban
 
Quote:

Originally Posted by Getter-Done (Post 9069912)
Interested in Third door hinges unless they go with the door.
Also 4th door Regulator,

Hinges won't go with the door. I'll check condition this weekend and get you some pics and a price. Same for the 4th door regulator.

Getter-Done 04-21-2022 11:22 PM

Re: Parting 1970 suburban
 
Quote:

Originally Posted by 402Bowtie (Post 9069976)
Hinges won't go with the door. I'll check condition this weekend and get you some pics and a price. Same for the 4th door regulator.

Sounds Great:metal:

You have my info.
I am a repeat customer. ;)
Thanks :ito::chevy:

402Bowtie 05-01-2022 11:55 PM

Re: Parting 1970 suburban
 
1 Attachment(s)
Quote:

Originally Posted by 71K5Randy (Post 9069855)
Hi, I’m interested in the blue interior parts - door panels, arm rests, seat belt parts (especially anchor covers), etc.

Quote:

Originally Posted by 71K5Randy (Post 9069857)
Also how are the rear side panels? How is the upper side panel chrome trim?

Quote:

Originally Posted by 71K5Randy (Post 9069862)
How is the step up panel between middle row floor pan and the cargo area? Mine has rust through on both ends.

Randy-- I brought back to Denver most of the interior panels and what was left of the seatbelts, including two anchor covers that appear to be in nice shape. I had to leave the chrome strips and some of the door panels, as I will have to drill out the screws. The step up panel is badly rusted. I actually have two sets of rear panels in blue...the other set has been in my garage for several years.

I've been swamped with work lately and will be all of this week again. I would like to get everything cleaned up and then post pics and price...hopefully next weekend. Thanks for your patience.

Quote:

Originally Posted by titospecial (Post 9069876)
Interested in the steering column

tito -- I still need your zip code if you are still interested. I attached a pic. It will not include the lower shaft, nor the steering wheel.

Quote:

Originally Posted by Getter-Done (Post 9069912)
Interested in Third door hinges unless they go with the door.
Also 4th door Regulator,

I brought the door hinges back with the third door. I can get pics and a price next weekend. I had to leave the 4th door regulator, as I was trying to be careful with that door panel (which will need the mounting screw drilled out).



This suburban is 7 hours away from me, but I will be back around Memorial Day to get more parts. I'll try to make sure I get what has been requested so far. Let me know if there are any other requests.

Getter-Done 05-02-2022 06:12 AM

Re: Parting 1970 suburban
 
Sounds good.:metal:

71K5Randy 05-02-2022 04:04 PM

Re: Parting 1970 suburban
 
Quote:

Originally Posted by 402Bowtie (Post 9074028)
Randy-- I brought back to Denver most of the interior panels and what was left of the seatbelts, including two anchor covers that appear to be in nice shape. I had to leave the chrome strips and some of the door panels, as I will have to drill out the screws. The step up panel is badly rusted. I actually have two sets of rear panels in blue...the other set has been in my garage for several years.

I've been swamped with work lately and will be all of this week again. I would like to get everything cleaned up and then post pics and price...hopefully next weekend. Thanks for your patience.

Thanks for the update, and my Suburban will be in the body shop for a while longer so no problem waiting.

Dave 05-02-2022 07:18 PM

Re: Parting 1970 suburban
 
I'm looking for a few items off this, the bracket for the dome light with screws, chrome headliner bows not broken and the last 3 sections of headliner if usable.
Lmk thank you.
Dave

402Bowtie 05-02-2022 07:39 PM

Re: Parting 1970 suburban
 
Quote:

Originally Posted by Dave (Post 9074337)
I'm looking for a few items off this, the bracket for the dome light with screws, chrome headliner bows not broken and the last 3 sections of headliner if usable.
Lmk thank you.
Dave

I think I might have everything except the headliner sections. But those parts are still in Nebraska. I'll check condition and get you a price later this month.

nightmare 05-02-2022 08:56 PM

Re: Parting 1970 suburban
 
Looking for the lower trim behind the front doors rearward. I see the driver side, have the passenger side too?

Eagle9502 05-02-2022 10:17 PM

Re: Parting 1970 suburban
 
Do you have the black headlight bezels?

THECRAZYKIDJR 05-07-2022 11:37 PM

Re: Parting 1970 suburban
 
Matching ignition tumbler and door locks with keys, including barn doors?

NDM 05-12-2022 04:39 PM

Re: Parting 1970 suburban
 
Is this a 2wd Blazer? Any interest in selling the 2wd crossmember for my 4wd to 2wd swap?

NDM 05-12-2022 04:40 PM

Re: Parting 1970 suburban
 
My last post meant to say is it a 2wd suburban?

71suburban4x4 05-14-2022 08:41 PM

Re: Parting 1970 suburban
 
Posted via Mobile Device

71suburban4x4 05-14-2022 08:43 PM

Would you cut a section of the rear passenger side quarter panel off the truck ?? Thanks Kyle 805-490-5594
Posted via Mobile Device


All times are GMT -4. The time now is 08:47 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com