The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   Restoring Rusty (https://67-72chevytrucks.com/vboard/showthread.php?t=645440)

Gregski 04-10-2016 12:01 PM

Re: Restoring Rusty
 
5 Attachment(s)
and so the Greg cleaned and clear coated another bell housing

Gregski 04-10-2016 12:09 PM

Re: Restoring Rusty
 
3 Attachment(s)
as a matter of fact got the entire new trans into the cleaning and clearing facility, who says patio tables don't make excellent transmission stands, LOL

man and I've always wondered what that round hole in the middle of that table was for while sippin' on my umbrella drink by the pool side!

Rob C 04-10-2016 12:15 PM

Re: Restoring Rusty
 
Go Go Go Gregski!! :metal:

Gregski 04-10-2016 12:24 PM

Re: Restoring Rusty
 
3 Attachment(s)
alright lets talk shifters, linkages, sticks and all things HURST as this is the brains of the entire operation

first let me just say that HURST was the Apple before APPLE existed (yes I am talking about the makes of the white phones)

if you think about it HURST created a need, well actually a want, I mean were people really tripping over themselves for external complicated linkages to change their gears, I mean they leave the shifter exposed to the elements under the gosh darn car, dirt, grime, water, snow, rain, it all gets up in there, why not just put the stick in the transmission where it is nicely covered up, but I degress

so the GM HURST shifter, which Lesson Number 1 is no HURST shifter at all, well it kinda is, let me explain

GM bought the shifter mechanism from HURST the bottom / the base part but being a Car Company [pronounced] "Cheap" thats all they bought, they did NOT buy the HURST stick, that's right they made their own Generic sticks and shoved them in there, so when you pull up those three pages of HURST shifters on the InterWebs you will not see our shifter on there, sure you'll see a couple that may look like it but it aint ours, that's all I am sayin'

on to Lesson # 2 make sure you get the linkage with the transmission when you buy it, when in doubt read Lesson Number 2 again. This again is not HURST linkage so don't bother looking for these sticks or fingers what ever you want to call them on the HURST's website you aint gonna find them, and if you is missing one like the Greg was you will have to argue with a know it all eBayer that what he has is not for a 4x4 only truck and that indeed it will work on a 2WD so please just sell it to me already, ha ha

yes I had to pay $100 bucks for a set of three fingers of which I really only needed one, but hey I had to get the right proprietery GM ones, know what I'm sayin' because that's how I roll

Gregski 04-10-2016 12:30 PM

Re: Restoring Rusty
 
3 Attachment(s)
here's what the GM finger brackets tabbies say on them, notice the 3 & OD one that is money, the Mopar ones say 3 & 4

Gregski 04-10-2016 12:36 PM

Re: Restoring Rusty
 
3 Attachment(s)
now some may say dude it don't matter, but if you look at those pesky brackets they have notches cut out in them so they go no the bolt a certain way, and let me tell you, you young whipper snappers those pesky notches have different angles so I don't think you can just snag a set of the Mopar A833 brackets and just bolt them up, plus one be upside down to make the Overdrive magic happen, but again we won't get into that here, that's what my other thread was for

I'm just going to PAUSE here for a moment and ask you this: Do you appreciate the great detail The Greg shares with you hear? Do you? LOL

Gregski 04-10-2016 12:45 PM

Re: Restoring Rusty
 
4 Attachment(s)
which brings us to Lesson Numero Tres in the self help guide to the GM HURST sticks

actually here is something I want to share that I learned about the HURST shifters, there are two different kind, well in terms of mating the stick to the shifter mechanism, 90% of them are the Bolt On type, you know you have the stick, it has two holes on the bottom, you use two bolts to bolt it up to the shifter box thingie and Bob's your uncle... well then there's the other kind, the Slip In type. Say what? This is the type where there is no bolts holding the stick to the shifter mechanism, instead the stick only has one hole at the bottom and you are supposed to use two rubber pieces and two metal clips like the ones below to lock it into place

why that's crazy talk Greg!?

Gregski 04-10-2016 12:53 PM

Re: Restoring Rusty
 
3 Attachment(s)
so can you guess which type GM decided to use on our trucks?

that's right the rarererer Slip-In kind, and to show how confident they were in that ideaology they decided to weld the darn thing to the receiver, that's right GM welded their proprietery "generic" sticks to the base of the shifter mechanism, I suspect cause they were falling out, I suspect because GM forgot to drill a hole in the base of their sticks to allow the metal clips to clip them in and lock them in place like HURST intended, but I may be totally wrong - which I'm not, JK

People's Exhibit A, an excavated GM stick from said Slip In receiver, notice the lack of a hole in the base

Gregski 04-10-2016 01:00 PM

Re: Restoring Rusty
 
3 Attachment(s)
alright having liberated the headless "generic" stick from the HURST receiver (and by headless I mean it aint got a ball on it cause it aint got threads on it) now we could go a shopping for the real deal and so we did

ta da, we got ourselves a real deal Hurst shifter part number 4331

will it work? will it clear the dash? the bench seat?

who cares man, its a real HURST stick, ha ha

Gregski 04-10-2016 01:04 PM

Re: Restoring Rusty
 
Do you know what I like most about HURST shifters?
  • how gosh darn modular they are, everything is it's own part, there are a million pieces there to join together

Do you know what I like the least about HURST shifters?
  • how gosh darn modular they are, everything is it's own part, there are a million pieces there to join together

Gregski 04-10-2016 01:11 PM

Re: Restoring Rusty
 
2 Attachment(s)
which brings us to today, now I could just drill the two holes in my stick bottom to bolt up the new shifter but in order to do things right so that the Greg can sleep at night I need to order the proper bottom piece for the Bolt On stick fortunately it's only $15 bucks but wait its a HURST component or one of a million parts that you'll need so we also need the Hurst 1950053 Manual Shifter Stiffener Mounting Plate w Bolts

HURST Straight Stick Bottom for Bolt On Shifter Handle Part #s H0008, 2390008

enaberif 04-10-2016 03:44 PM

Re: Restoring Rusty
 
FYI.. Early NP203 transfer cases used a Hurst labelled shifter like in your pics.

Gregski 04-10-2016 05:31 PM

Re: Restoring Rusty
 
3 Attachment(s)
one of the things that be different about the 833 trans and the SM465 is the Backup Switch the 833 uses a more modern looking type, like so

Gregski 04-10-2016 05:34 PM

Re: Restoring Rusty
 
3 Attachment(s)
which in turn requires a new pig tail connector for which my local parts houses want [wait for it] .... $25 BUCKS!!! [pronounced] Highway Robbery - technological progress be damned

man I am gonna git one from the junk yard this week, we'll see how much they want for a used one, ha ha

400/400 04-10-2016 05:45 PM

Re: Restoring Rusty
 
At my local auto parts store they sell the components of those connectors individually for far less than a pigtail. You just need the two pins, two weather seals and the plastic connector. You can also order the pieces online.

400/400 04-10-2016 05:53 PM

Re: Restoring Rusty
 
1 Attachment(s)
Here's what they look like disassembled. This is a three wire version.

Gregski 04-10-2016 06:08 PM

Re: Restoring Rusty
 
Quote:

Originally Posted by 400/400 (Post 7555627)
Here's what they look like disassembled. This is a three wire version.

Interesting and very cool, thank you for sharing, what's the name of the parts house up in "sunny" Minnesota?

Gregski 04-10-2016 06:13 PM

Re: Restoring Rusty
 
1 Attachment(s)
well chiverly timbers, I sure wished I paid more attention when I took off these enjin cross member support brackets as they come with two longer bolts and two shorter ones, anybody knows where which ones go, top or bottom type a thing - they looked the same to me as I removed them and tossed them on the garage floor carefully, LOL

not sure I knew the different sizes when I laid them our for this there anatomy photo

400/400 04-10-2016 06:21 PM

Re: Restoring Rusty
 
Quote:

Originally Posted by Gregski (Post 7555643)
Interesting and very cool, thank you for sharing, what's the name of the parts house up in "sunny" Minnesota?

No problem. It's a NAPA. Although it my be "sunny" up here it's still chilly. Yesterday morning was 16 degrees. Can't wait for it to start warming up.

hatzie 04-10-2016 06:30 PM

Re: Restoring Rusty
 
Quote:

Originally Posted by Gregski (Post 7555608)
which in turn requires a new pig tail connector for which my local parts houses want [wait for it] .... $25 BUCKS!!! [pronounced] Highway Robbery - technological progress be damned

man I am gonna git one from the junk yard this week, we'll see how much they want for a used one, ha ha

Good lord. That's $2.15 in parts and shipping is $5-$8. Less than half that pigtail and you can use SXL wire rather than the GP series wire they used.
Mouser Electronics sells Weatherpack terminals and shells.
12015792 two position tower shell $1.33 x 1
12089188 Terminals $0.31 x 2
15324982 Green seals $0.10 x 2
You can get kits on Amazon for $7.99 with Prime shipping.www.amazon.com/gp/product/B004DVM7RG
A $30 crimp tool will do the job if you aren't doing a bunch of them. http://www.amazon.com/Delphi-Packard-Weatherpack-C... http://www.amazon.com/Delphi-Packard-Weatherpack-C... If you're playing with antique GM vehicles you'll do more.
The Delphi Ratchet Crimping Tool 12085270 is a very nice tool that will handle Weatherpack, Packard 56 & 59, along with Metripack 150-280 connectors. It's also $90

y5mgisi 04-10-2016 06:36 PM

Re: Restoring Rusty
 
Gresgski, I hope you understand how much i appreciate this thread. Love your writing style, love the detail, love the fun facts, love the quarks etc. It is one of my favorite threads of all time. Thank you for all that you do to bring more to this thread!

Gregski 04-10-2016 09:59 PM

Re: Restoring Rusty
 
Quote:

Originally Posted by y5mgisi (Post 7555678)
Gresgski, I hope you understand how much i appreciate this thread. Love your writing style, love the detail, love the fun facts, love the quarks etc. It is one of my favorite threads of all time. Thank you for all that you do to bring more to this thread!

Wow, thank you so much, I really appreciate it.

Gregski 04-10-2016 10:05 PM

Re: Restoring Rusty
 
1 Attachment(s)
yes honey I will do the dishes while you're gone, bye now, bye, you and the kids have a great time at your folks for dinner, mmm bye

[5 minutes later] queue Mission Impossible music

Lads tell me you aint excited about this?

I want you to look me in the eye and tell me this aint got rhythm and that there's not enuff floor space, so you just can't dance to it!!!

Gregski 04-10-2016 10:08 PM

Re: Restoring Rusty
 
Alright so plan for today, first we make a list of things we got to do in the garage:

TO DO
1. Re Clock The Alternator


perfect, got it, simple

Gregski 04-10-2016 10:13 PM

Re: Restoring Rusty
 
5 Attachment(s)
OK, here we go, nothing to it, but to do it

... but first check out how nice this enjin crossmember support bracket turned out...

wonder how it would look on the frame

... check it out, it looks great, but you can't just mount one and not the other, you're gonna hurt it's feelings

... there that's better


All times are GMT -4. The time now is 10:47 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com