The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - Tach help please (https://67-72chevytrucks.com/vboard/showthread.php?t=843133)

oldtrux

03-21-2023 01:47 PM

Tach help please

1 Attachment(s)

Anyone familiar with this tach? 6-8 cylinder??

scottofksu

03-21-2023 04:18 PM

Re: Tach help please

I can't offer much in the way of which engine this tach will work for, but I can say it looks to be a later unit if its factory (i.e., without a transmitter box).

I did find this post that includes a picture of an OE-1 by member 1963c-10. Not sure if they are still on here or if that was their tach that was pictured. I believe what you have is a V8 tach, but I am not certain.

https://67-72chevytrucks.com/vboard/...=392461&page=4

oldtrux

03-21-2023 04:57 PM

Re: Tach help please

Thank you,I appreciate the help!!

oldtrux

03-21-2023 05:04 PM

Re: Tach help please

I guess my next quest will be can i make it work with an hei dizzy? Nothings easy lol

Arne	03-21-2023 05:44 PM

Re: Tach help please

Quote:

Originally Posted by oldtrux (Post 9188998)

I guess my next quest will be can i make it work with an hei dizzy? Nothings easy lol

Take a look at this. Pretty sure the owner (Bob Ashlock) can set you up, regardless of what the original tach was for.

https://ashlocktech.com/tach-adapt-1

oldtrux

03-21-2023 08:18 PM

Re: Tach help please

Thank you!

bhap	03-21-2023 09:07 PM

Re: Tach help please

Ron at Williamson's Instruments in Arkansas is top notch. He just repaired an old Sun tach for me by converting it to solid state. Super nice guy and quick turnaround.

oldtrux

03-22-2023 07:15 AM

Re: Tach help please

Quote:

Originally Posted by bhap (Post 9189079)

Ron at Williamson's Instruments in Arkansas is top notch. He just repaired an old Sun tach for me by converting it to solid state. Super nice guy and quick turnaround.

I will check this out, thanks!

Nanook

03-23-2023 12:01 AM

Re: Tach help please

Quote:

Originally Posted by Arne (Post 9189009)

Take a look at this. Pretty sure the owner (Bob Ashlock) can set you up, regardless of what the original tach was for.

https://ashlocktech.com/tach-adapt-1

100% agree...just purchased one of his units and I am using an original 8 cyl tach with a 6 cyl. (It also will work with the HEI)

oldtrux

03-23-2023 10:24 AM

Re: Tach help please

Quote:

Originally Posted by Nanook (Post 9189490)

100% agree...just purchased one of his units and I am using an original 8 cyl tach with a 6 cyl. (It also will work with the HEI)

Thanks,i have reached out to him!

MikeN

03-23-2023 11:14 AM

Re: Tach help please

If that tach works with a points-type distributor, it should work fine on an HEI. There is a TACH terminal on the HEI, just run a wire there from the DIST terminal on your tach.

oldtrux

03-23-2023 11:19 AM

Re: Tach help please

Quote:

Originally Posted by MikeN (Post 9189611)

If that tach works with a points-type distributor, it should work fine on an HEI. There is a TACH terminal on the HEI, just run a wire there from the DIST terminal on your tach.

Oh that would be nice! I will give it a shot!thanks for help

oldtrux

03-23-2023 01:16 PM

Re: Tach help please

Ok,so I reached out to Bob at ashlocktech and he told me I should be fine with my DUI HEI dizzy. He went out of his way to research my dizzy to find out! As was mentioned above what a super knowledgeable and nice guy!! Thanks so much for the great info.
Dan

All times are GMT -4. The time now is 07:32 PM.