K20 Rotor size issue
Ok, I am confused on this one.
I have a 1970 K20 suburban and i have swapped the front axle to get disc brakes from an 85' K20. I have rebuilt the locking hubs (new locker, bearings, the works) and went to go put on new rotors (Bendix prt1049) which say they fit but, I have a clearance issue with getting them over the outer flange of the locking hub. Am i missing something, i measured the rotor inner diameter and it is just shy of 8 inches, but measuring the outer flange of the locking hub im close to 8 5/16 in. Any ideas on what rotor I would need? |
Re: K20 Rotor size issue
nvm, I am an idiot and need to take this all apart and put the rotor on behind the hub like it is supposed to be...
|
Re: K20 Rotor size issue
Quote:
|
Re: K20 Rotor size issue
I'm sorry but I can not offer you any help with your problem :lol:
Ok, let's quit before we get started on stories of knucklehead (speaking of myself) things we have done... or have a friend who told you about a guy who... (yeah right) I'm glad you got it worked out |
All times are GMT -4. The time now is 03:29 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com