Anyone have their windshield out? Need to verify a dimension
 

Getting ready to weld in the windshield area.
I need to verify the width of the opening all the way across the very top of the WS frame at the corners.
I want to make sure it matches the jig that I made for the spacing
I had to remove it to put in the inner A pillars
Attachment 2158437

Re: Anyone have their windshield out? Need to verify a dimension
 

Straight across inside corner to inside corner is 56 1/2" . :chevy:

Re: Anyone have their windshield out? Need to verify a dimension
 

thanks Grumpy…I’m at 56-5/8” 👍

Re: Anyone have their windshield out? Need to verify a dimension
 

I have another 67 cab burried in the corner of the garage , and 2 more outside covered in tarps , I'll move some stuff out of the way and get some more measurements . :chevy:

Re: Anyone have their windshield out? Need to verify a dimension
 

Sounds like Grumpy has you covered. I'm having the windshield on my Burban pulled and resealed here in another 30 minutes. Would have been perfect timing.

Re: Anyone have their windshield out? Need to verify a dimension
 

I'm going to confirm Grumpy's 56 1/2 measurement. That is what mine is.

Re: Anyone have their windshield out? Need to verify a dimension
 

this forum is better than four years of college
thanks to all…..
I’ll post the results soon
much appreciated ��

Re: Anyone have their windshield out? Need to verify a dimension
 

I'll post my dimensions shortly. Gotta have dinner with the wife first 😉

Re: Anyone have their windshield out? Need to verify a dimension
 

Same. 56 1/2".

Re: Anyone have their windshield out? Need to verify a dimension
 

Just to check with you guys but is that the straight line dimension or is that following the windshield curve?

Re: Anyone have their windshield out? Need to verify a dimension
 

Straight across inside corner to inside corner is 56 1/2" :chevy:

Re: Anyone have their windshield out? Need to verify a dimension
 

I’m certain it’s straight line….that’s close to my existing measurement with everything just vise gripped in place ….when I pulled my bracing the jig I had moved about 1/8”
I’ll make a new gauge to go across and clamp everything in place
I don’t want any surprises when I go to install the windshield

Re: Anyone have their windshield out? Need to verify a dimension
 

Grumpy…..your cab looks fantastic…what would you take for it? cash money tomorrow?

Re: Anyone have their windshield out? Need to verify a dimension
 

Just to be Crystal clear, I assume you are measuring from the end of the black arrow and not the end of the red arrow?

https://67-72chevytrucks.com/vboard/...ictureid=26695

Thanks!

Re: Anyone have their windshield out? Need to verify a dimension
 

Haha , I'm still working on that one , I just saw your post , I have another solid 67 cab with the number matching short bed frame and clean/clear title in my name I'm getting ready to sell with solid doors . and a ton of build parts . Too many projects and not enough room :chevy:

Re: Anyone have their windshield out? Need to verify a dimension
 

I’m gonna text your phone…

Re: Anyone have their windshield out? Need to verify a dimension
 

yes…black arrow

Re: Anyone have their windshield out? Need to verify a dimension
 

One last question. What is the distance between the drivers and passengers sides where the red arrow is?

https://67-72chevytrucks.com/vboard/...ictureid=26697

Re: Anyone have their windshield out? Need to verify a dimension
 

I get 57 1/4

Kind of hard to measure with one person. Tape measure basically rests on the top of the dash to measure.

Re: Anyone have their windshield out? Need to verify a dimension
 

Awesome!! Thank you so much!!