434 sbc oil pan
Been awhile since I have posted. I am building a new 434 SBC for my 68. I am using a Dart Little M raised cam location block. I am looking for recommendations for an oil pan to fit the stock chassis and crossmember. Street driven most all the time. Looking for a good pan for oil control and to keep windage down. Opinions of running a true crank scraper also? Thanks for any info!
|
Re: 434 sbc oil pan
I would put more money in a good pump than a pan. I'm a believer in Gerotor style pumps. no need for a crank scraper on a street motor.
|
Re: 434 sbc oil pan
Thanks for the response, I will do my homework and look into that.
|
Re: 434 sbc oil pan
As far as a pan goes, I ran a Kevko #1070 street/strip pan on my stock block 434 and I have that same pan (only in a RH dipstick configuration) on my SHP 434 now. Fits great and shows no oil pressure drop going down the track. I did have to do some minor clearancing on the crank scraper, however, but nothing major.
|
Re: 434 sbc oil pan
There ya go a Small Block guy to talk to. Nx knows what to do.
|
Re: 434 sbc oil pan
I still don't like stock type Melling pumps though.
|
Re: 434 sbc oil pan
Quote:
|
All times are GMT -4. The time now is 08:25 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com