Looking for 67-72 Suburban lift gate upper hinge area..
 

I am looking for the inner panel that the lift gate hinges bolt through. I am starting back to work on it and need to fit the lift gate. Email me wehepp@comcast .net with what you have and what you want for it. WES

Re: Looking for 67-72 Suburban lift gate upper hinge area..
 

What part do you need? Does the part you want include the drip rail or just the inner piece. Also ,how far past the hinge area do you need?I know you said inner,but just wanted to be sure.

Re: Looking for 67-72 Suburban lift gate upper hinge area..
 

I am stripping a burb that has a good upper part.
Send me a pix of what you want and/or PM me. When I go out to the shop Sunday I will take some.
SCJKOVACH@AOL.COM
Thanks,
Steve

Re: Looking for 67-72 Suburban lift gate upper hinge area..
 

It is just the inner panel that I need. I would cut about 4" beond where the hinges are bolted through and even include the drip rail. I would rather have too much and trim out what I need, than have to try to add to it. I can't take pictures now, because I took the panel to another body shop for this. WES

Re: Looking for 67-72 Suburban lift gate upper hinge area..
 

The upper drip rail is rusted on this one,but the inner looks fine. $20 + shipping.

Re: Looking for 67-72 Suburban lift gate upper hinge area..
 

Here's a pic.

Re: Looking for 67-72 Suburban lift gate upper hinge area..
 

If when you cut the piece loose it is not rusted too heavely I will take the peice. I would like to see pics when you have it cut out. WES

Re: Looking for 67-72 Suburban lift gate upper hinge area..
 

Uncle are the "B" pillars and drip rail good on that top?

Re: Looking for 67-72 Suburban lift gate upper hinge area..
 

ttt

Re: Looking for 67-72 Suburban lift gate upper hinge area..
 

Hartrod,the drip rail is rusty. I'll get the part cut out today. Sorry for the delay.

Re: Looking for 67-72 Suburban lift gate upper hinge area..
 

Spoke on the phone with you. Just let me know how it goes. WES