72 C10 Cab for Sale
 

Cab for sale. Needs a little work but all in all a very strong cab with little rust to repair. I started on it but had another cab that was in even better condition. Needs a couple small patches in the floor but most is just surface rust. Comes with clear title. Asking $550.00 OBO.

Re: 72 C10 Cab for Sale
 

any detailed areas with issues?

Re: 72 C10 Cab for Sale
 

If I were using this cab I would replace passenger rocker (included with cab) and a couple small patches between floor and rockers were these cabs are bad about rusting. Poor design that can be easily corrected by cutting out and welding new piece in. Like I said, it is a very strong cab. I just don't need two.

Rick

Re: 72 C10 Cab for Sale
 

About 99% of the time these cabs need both outer rockers due to not being painted on the inside and they rust inside out. Does it need just an outer or inner as well? Some detailed photos will help with your sale, such as inside above the visors, drip rails, firewall and underside areas such as cab supports. I live nw of austin and dont have the time to come all the way to SA only to find its in the same shape as what i already have.

Also is the vin/ title a 1/2 ton 3/4 ton, 2wd 4x4, 6 or 8 cyl? (CS1, KE2, etc)
Posted via Mobile Device

Re: 72 C10 Cab for Sale
 

I'll add some more shots of the cab in the areas you mentioned tomorrow if it has not already sold. Two other on local Craigslist interested as well. There is no rust at all in the upper portion of the cab and both inner and outer rocker are included but I don't believe the inner needs to be changed out. Cab is a 72 GMC, 1/2 ton RWR, ID TCE142S513541. I have title in hand from previous owner.

Re: 72 C10 Cab for Sale
 

If whiteside 72 is not interested i'd like to come take a look at it

Re: 72 C10 Cab for Sale
 

No deals have been made with anyone. If you are interested you are more than welcome to come take a look. Give me a call and we can arrange a time.

Rick 210-355-0772

Re: 72 C10 Cab for Sale
 

Can you add a few more pics like the ones you told wideside72 you would post? It would be appreciated.

Re: 72 C10 Cab for Sale
 

Sure. I'll get them posted tomorrow.

Rick

Re: 72 C10 Cab for Sale
 

Dont let me hold anyone up!
Posted via Mobile Device

Re: 72 C10 Cab for Sale
 

Guys - Round one of more photos as requested.

Rick

Re: 72 C10 Cab for Sale
 

Round two of more photos.

Re: 72 C10 Cab for Sale
 

will you ship

Re: 72 C10 Cab for Sale
 

Cab looks good I Sent you a text, Give me a call or let me know what day and time works for you and ill make it work on my end, thanks

361-533-0804 Josh

Re: 72 C10 Cab for Sale
 

Can you give me a width and length measurement on the cab?
I'm working around Gonzales right now and i'd like to pick it up, but i dont have my trailer with me. kinda hoping i could strap it in my truck bed. Probably wishful thinking!
Thanks for the help. If it wont fit ill get you paid and get my trailer.

Re: 72 C10 Cab for Sale
 

A cab will fit in a swb truck. I had one in back of a 71 c10 for couple years. BUT it will have to be sat down in it, due to the fact the hump area will have to straddle the wheel tub !!! Can't slide it in. Best I remember.
Posted via Mobile Device

Re: 72 C10 Cab for Sale
 

Thanks for the info STP67-72. Ive got an 08 F-250 SWB, so i hope it'll fit it sure would save me some fuel not having to go get my trailer. thanks again!

Re: 72 C10 Cab for Sale
 

Cab is 4' 10" X 6' 4"

Should fit sideways in your truck bed.

Rick 210-355-0772

Re: 72 C10 Cab for Sale
 

I sold a 72 cab a few years ago and the new owner had an 07 or 08 chevy swb and the cab fit sideways. He even got the tailgate up!
Posted via Mobile Device

Re: 72 C10 Cab for Sale
 

I'll call you tomorrow to work out the details on the cab and set up a time.
Thanks, Josh
Posted via Mobile Device

Re: 72 C10 Cab for Sale
 

Thanks for the info wide side 72.
Hope to get it this week
Posted via Mobile Device

Re: 72 C10 Cab for Sale
 

Made it home with the cab, thanks again rick!

Re: 72 C10 Cab for Sale
 

Cool! Let me know if you need anything else.

Rick