Re: Restoring Rusty
2 Attachment(s)
and the other side, done
|
Re: Restoring Rusty
How did the new clutch feel? Should be easier on the leg.
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
1 Attachment(s)
Quote:
Seriously, you ever heard that expression, "Man plans and God laughs"? Well, I had plans, I wanted to install that '78 gauge cluster I scored on eBay with a tachometer, volt meter, and electronic oil pressure gauge, but Rusty showed me he has other plans... |
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
Quote:
Do you know how to adjust the clutch pedal height so I don't knee myself in the jaw every time I try to change gears? LOL, or is it not possible because of the set height vertical push rod? |
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
Nice work, Gregski - it's always fun to watch someone work fast and do it right!
|
Re: Restoring Rusty
Good job on everything!
|
Re: Restoring Rusty
Nice update. This kind of progress is contagious.
|
Re: Restoring Rusty
Quote:
If you crank the window all the way up, there's enough room to get the stuff in through the large opening and affix it to the outside door skin. |
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
Quote:
By the way, do you have compressed air? |
Re: Restoring Rusty
2 Attachment(s)
Quote:
|
Re: Restoring Rusty
3 Attachment(s)
found the contact spot on that fly wheel inspection dust cover, one swift love tap with the 3 lbs sledge and she rubbed no more
last pic is what it was rubbing against, the end of the crank shaft which is not exactly round but that weird shape |
Re: Restoring Rusty - Speedometer Cable
5 Attachment(s)
before putting the turtle shell back on the transmission tunnel I decided I should replace the speedometer cable since the end that screws on to the transmission had stripped threads
I think you do not have to even remove the speedometer from the gauge cluster to do it, you can just reach around the back and snap the cable out but I forgot so I removed the speedo, it was easier since I don't have a dash pad on at the moment in addition to unsapping the cable from the speedometer and unscrewing the other end from the transmission, there are two clip brackets that need unboltnig one has a larger bolt than the other, one is in the engine bay, the other under the driver's floor |
Re: Restoring Rusty
Quote:
Make sure to bench bleed it when you get a new one. |
Re: Restoring Rusty
1 Attachment(s)
couple minutes finagling that larger bolt bracket in the engine bay and the old speedo cable was out
|
Re: Restoring Rusty
Quote:
BTW, if that Lubriplate has shown up, it's a great choice for the speedo cable lube. |
Re: Restoring Rusty
2 Attachment(s)
please inspect your parts before you take them home from the parts house
here is the new cable I got from The AutoZone, the $6 dollar price tag should have been the first Red Flag you ever heard that expression it's like trying to fit a square peg in a round hole, well how about a round peg in a square hole I recon this special order cable got fandangled in shipping |
Re: Restoring Rusty
2 Attachment(s)
here's how the new cable compares to the old
that red protective cap sure did a lot of good didn't it |
Re: Restoring Rusty
2 Attachment(s)
well after an hour or so (that I will never get back) I tapped the fitting into submission using a 10 mm socket and got the cable installed, and the speedo works, but since the gauge is bulging out a bit in the middle I recon the cable needs to go in about 1/6h of an inch more but it can't so I think I will be getting another one from The NAPA Auto Parts store tomorrow
ah the joys of aftermarket quality parts |
All times are GMT -4. The time now is 10:59 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com