Close up pictures of factory spark plug wire routing
 

Looking for some close up pictures of how the spark plug wires are ran under the rams horn manifolds on a 1972. I believe there is a clip that goes on the oil pan. Would like to see close up pictures of how all this is routed. Thank you.

Re: Close up pictures of factory spark plug wire routing
 

I've got some pics of pre and post restoration from a 1972 K20 I restored. Unfortunately, I could only find two pics of the clips on the oil pan. Hopefully these will help some.

Miles

Re: Close up pictures of factory spark plug wire routing
 

A few more...

Re: Close up pictures of factory spark plug wire routing
 

I found one more pic of the passenger side oil pan clip. This is from a 70 K20. The plug wires for cylinder #2 & #4 should attach here

Re: Close up pictures of factory spark plug wire routing
 

Thank you very much. That’s exactly what I needed. Plug wires are in now. This is why I love this forum!

Re: Close up pictures of factory spark plug wire routing
 

Can someone explain exactly how you are supposed to get the wires through the rubber holders below the heat shielding? I have preformed wires ! I don’t want to cut off one end to fit through the rubber locators.:metal:

Re: Close up pictures of factory spark plug wire routing
 

You can see in this photo what I’m referring to, the wires are not in the rubber locater.

Re: Close up pictures of factory spark plug wire routing
 

I took the holders off, put the wires in them and bolted it back in. Pain in the neck really.