Re: My 58 Brookwood
 

All mocked up after pulling the column and brakes 5 times to ensure everything fit

Re: My 58 Brookwood
 

Here’s the lower column bracket we made
Here’s an "in progress pic of the firewall

Re: My 58 Brookwood
 

Firewall is all finished and we begin final install on the brakes and column tomorrow

Re: My 58 Brookwood
 

These are the handmade motor Mount Adapters
The motor Mounts and Adapters required Modification

Re: My 58 Brookwood
 

We Built the motor mounts and test fit the engine today

Re: My 58 Brookwood
 

Today we put on the collector’s and welded the O2 bungs
We also created a firewall pass through for the Wiring harness.

Re: My 58 Brookwood
 

The new alternator came in
The new O2's came in
And we finally pulled that lifting plate off and put the Valley cover back on

Re: My 58 Brookwood
 

Here is that 600hp LS3 nestled in the engine bay!
Here’s a view From the bottom of That 4L80E and how well it Fits.

Re: My 58 Brookwood
 

Looking awesome. I like those valve covers on the LS3. A bit of old school flare with the fins. Where did you find them? Is the harness a holley terminator?

Re: My 58 Brookwood
 

Nope, bought it one eBay. $450

Re: My 58 Brookwood
 

we put 2 3/8 nipples in the bottom for the brake booster and the PCV

Re: My 58 Brookwood
 

Here’s the overview of how the engine looks in the bay
so we cut the tunnel 7” wide to facilitate the installation of our 12” Lokar tail shaft mounted shifter

Re: My 58 Brookwood
 

We got the right MAP sensor in today and mounted it
I think it looks clean on the back of the intake
Here’s that LS3 in the engine bay. Just can’t get enough of that sick looking MF'er!

Re: My 58 Brookwood
 

We put the 3/8 hoses on the intake
Routed the steam tubes
This is the engine with all the Wiring ran and plugged in

Re: My 58 Brookwood
 

Looking good!

Re: My 58 Brookwood
 

Thank you

Today we modified the Transmission crossmember to slide 8” back for our 4L80E

Re: My 58 Brookwood
 

It's coming along nicely. Keep plugging away!

Re: My 58 Brookwood
 

We are only able to work on it about an hour a day.