The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - rims (https://67-72chevytrucks.com/vboard/showthread.php?t=818368)

BigBird05

02-13-2021 01:41 PM

rims

Does anybody know if the 1999 thru 2006 Chevy 6 bolt rims will fit on a 1970 C-10?

jsbgump

02-13-2021 04:59 PM

Re: rims

The center hub opening is too small from what I have heard. The opening will have to be opened up some.

truckster

02-13-2021 05:52 PM

Re: rims

If it's a C10 it should have a 5 bolt pattern...

If it's a K10 the bolt pattern on both is 6x5.5, but the center opening is going to be too small, as mentioned. I found a local machine shop that could open up the center hub on some motor home wheels for me... I think it was $45 to $50 per wheel.

SCOTI

02-13-2021 06:27 PM

Re: rims

Quote:

Originally Posted by truckster (Post 8879636)

If it's a C10 it should have a 5 bolt pattern...

If it's a K10 the bolt pattern on both is 6x5.5, but the center opening is going to be too small, as mentioned. I found a local machine shop that could open up the center hub on some motor home wheels for me... I think it was $45 to $50 per wheel.

Not until 71 & disc brakes came along.

truckster

02-13-2021 08:23 PM

Re: rims

In that case, it should fit, with the proper machining. You also need to consider the length of the wheel studs. You may need to swap them out for longer ones if you're using aluminum wheels.

All times are GMT -4. The time now is 07:36 PM.