The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - core support (https://67-72chevytrucks.com/vboard/showthread.php?t=824033)

64k10burb

07-21-2021 08:03 PM

core support

1 Attachment(s)

Hi guys, I just picked up a '69 c-10 Fleet.

most of the passenger side core support mounts (for inner fender) are gone.

Can I make a pattern from the drivers side and flip it?

I'm not sure if they are the same on both sides.

Thanks in advance.

LockDoc

07-21-2021 08:59 PM

Re: core support

-
Moved it for you.

LockDoc

truckster

07-21-2021 10:52 PM

Re: core support

I'd replace it. But you should be able to just flip it if you really want to do some fabricating.

Richard

07-22-2021 12:28 AM

Re: core support

If you want to fix check this out https://67-72chevytrucks.com/vboard/...t=core+support Not sure if he has any left.

dmjlambert

07-22-2021 06:43 AM

Re: core support

That is also available as an aftermarket patch panel. I don't know if it's any good. https://www.brotherstrucks.com/1967-...tinfo/RSP72RH/

64k10burb

07-22-2021 11:58 AM

Re: core support

Quote:

Originally Posted by LockDoc (Post 8948109)

-
Moved it for you.

LockDoc

Thanks Doc!

Quote:

Originally Posted by truckster (Post 8948157)

I'd replace it. But you should be able to just flip it if you really want to do some fabricating.

OK, Thank you Truckster!

Quote:

Originally Posted by Richard (Post 8948184)

If you want to fix check this out https://67-72chevytrucks.com/vboard/...t=core+support Not sure if he has any left.

Great, thanks!

Quote:

Originally Posted by dmjlambert (Post 8948204)

That is also available as an aftermarket patch panel. I don't know if it's any good. https://www.brotherstrucks.com/1967-...tinfo/RSP72RH/

I hadn't seen that before, Thanks!

All times are GMT -4. The time now is 07:26 PM.