WTB Heat Shield and Riser Tube for SBC
 

Looking for the inner/outer shield and the riser tube for a SBC.
Photo borrowed from an old Ad.
https://photos.smugmug.com/DUMP/n-Qb...-NtvS8nq-M.jpg

Re: WTB Heat Shield and Riser Tube for SBC
 

I acquired the riser tube but am still looking for the shields. TTT

Re: WTB Heat Shield and Riser Tube for SBC
 

I'll check tomorrow. I may have them

Re: WTB Heat Shield and Riser Tube for SBC
 

Sorry for the delay. I don't think I have exactly what you're looking for, but here's a pic of what's installed on my SBC. Let me know if any of this would work for you

Attachment 1985493

Attachment 1985494

Re: WTB Heat Shield and Riser Tube for SBC
 

That is a heat riser assembly but looks to be from a different year. Is that the passenger side?

Thanks for checking!

Re: WTB Heat Shield and Riser Tube for SBC
 

Yup, passenger side. I honestly have no idea what this engine is out of. It's in my 71 Suburban, but its a 350 and the SPID says it came with a 400 so who knows where the PO sourced it from.

Re: WTB Heat Shield and Riser Tube for SBC
 

Bump
Picked up a riser tube but still looking for the shields.

Re: WTB Heat Shield and Riser Tube for SBC
 

Is this what you're looking for? Came off my '72 350/350.

Re: WTB Heat Shield and Riser Tube for SBC
 

I think so but let me look at my photos this evening to confirm. Maybe the photos I have are from a different model.

Is that texture paint or is that just the photo?

Re: WTB Heat Shield and Riser Tube for SBC
 

Not texture paint, it is the oh so desirable "patina" It's been a CA truck all its life here in Nor Cal central valley (Sacramento area), so it appears to be surface rust.

Re: WTB Heat Shield and Riser Tube for SBC
 

I found photos of outer shields with, and without, holes so I am guessing there were different versions.

Do you happen to have the inner piece too? If not I will probably just hold out until I can a inner/outer set. Thanks again for digging it out and taking photos.

Re: WTB Heat Shield and Riser Tube for SBC
 

The ones with the two large holes I think were for the bosses on the manifolds that could be used for A.I.R. injection (smog) trucks.

Re: WTB Heat Shield and Riser Tube for SBC
 

Looks like I do have the other side also, tore it all out a few years ago after a rebuild. I have headers now so don't need them, here's a pic of what I have:

Re: WTB Heat Shield and Riser Tube for SBC
 

I would be interested in the inner shield if you will separate and distortedolschool passes.

Re: WTB Heat Shield and Riser Tube for SBC
 

I would be interested in the 4 spark plug shields. Price shipped to 44805

Mike

Re: WTB Heat Shield and Riser Tube for SBC
 

I passed on it so y'all can PM him directly and ask about parts.

and if you know of someone with an inner and outer heat shield, let me know!

Re: WTB Heat Shield and Riser Tube for SBC
 

Bump. Still looking for the heat shield without the holes.

Re: WTB Heat Shield and Riser Tube for SBC
 

You looking for one without holes and for straight dump or angled back? Which manifolds do you have?

Re: WTB Heat Shield and Riser Tube for SBC
 

The angle back slightly. Hopefully you can see the photo but they are stock manifolds.
https://photos.smugmug.com/photos/i-...-8275gcv-M.jpg

Re: WTB Heat Shield and Riser Tube for SBC
 

Bump.
Still looking for the inner and outer shields without the smog holes.

Re: WTB Heat Shield and Riser Tube for SBC
 

I think I have the set..the earlier set that Norcal20 posted were for 4x4 manifolds..the 2wd angles back more. I'll double check tmrw and lay hands on them.

Re: WTB Heat Shield and Riser Tube for SBC
 

Here you go...let me know if you still need them.
I can take them to post office first of the week.

Re: WTB Heat Shield and Riser Tube for SBC
 

Perfect! I'll PM you.

Re: WTB Heat Shield and Riser Tube for SBC
 

Bump. Still looking for the inner/outer shields.

Re: WTB Heat Shield and Riser Tube for SBC
 

Bump. Still looking for the inner/outer shields.