The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Tools, Shops and Shop Safety (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=89)
-   -   The new Ole Sarge Customs shop (https://67-72chevytrucks.com/vboard/showthread.php?t=808960)

skymangs 07-10-2020 05:00 PM

The new Ole Sarge Customs shop
 
4 Attachment(s)
The building is 70x30. Uninsulated, no power. There is a dividing wall providing a 40 ft (with a ceiling),and a 30ft unfinished side.

skymangs 07-10-2020 05:17 PM

Re: The new Ole Sarge Customs shop
 
3 Attachment(s)
This is the inside

skymangs 07-10-2020 05:31 PM

Re: The new Ole Sarge Customs shop
 
4 Attachment(s)
I immediately commissioned a friend to wire the shop. As a shop. 200 Amp main with 4 dedicated 220V circuits, 1 20 amp breaker for each wall, 15 amp for lights only.

skymangs 07-10-2020 05:41 PM

Re: The new Ole Sarge Customs shop
 
2 Attachment(s)
I also had him install garage door openers on every door, and motion detector LEDs outside

skymangs 07-10-2020 05:53 PM

Re: The new Ole Sarge Customs shop
 
3 Attachment(s)
Next we found a working 1946 Philco refrigerator, and I knew it was perfect for the shop!

skymangs 07-10-2020 06:11 PM

Re: The new Ole Sarge Customs shop
 
5 Attachment(s)
Then a good friend of mine started petitioning tool manufacturers and telling them my story. I received several care packages. We also decided that a proper bench should be 16ft, and set about extending it. Alex got a new toolbox too.

skymangs 07-10-2020 06:21 PM

Re: The new Ole Sarge Customs shop
 
5 Attachment(s)
Then we began the slow process of insulating and putting up plywood and painting

The Rocknrod 07-10-2020 06:30 PM

Re: The new Ole Sarge Customs shop
 
Great work, keep us posted.

skymangs 07-10-2020 06:33 PM

Re: The new Ole Sarge Customs shop
 
3 Attachment(s)
we continued putting things behind the bench. A large sign, pegboard, bluetooth surround sound, 40” LCD hooked up to my laptop to display wiring schematics and such.

skymangs 07-10-2020 07:01 PM

Re: The new Ole Sarge Customs shop
 
4 Attachment(s)
Here’s the exterior sign my boys are working on. It’ll be on a dusk till dawn sensor. The divider bar in the back has 4' of green LED on top and 4' of white on the bottom.

Oh and it’s 84” x40”

skymangs 07-10-2020 07:05 PM

Re: The new Ole Sarge Customs shop
 
Quote:

Originally Posted by The Rocknrod (Post 8772290)
Great work, keep us posted.

Thanks

skymangs 07-10-2020 07:22 PM

Re: The new Ole Sarge Customs shop
 
5 Attachment(s)
And now I’m having an additional 24x40 building constructed to move some of my cars and open up some bay space. It should be finished on Monday.

LockDoc 07-10-2020 10:48 PM

Re: The new Ole Sarge Customs shop
 
-
Looks good Sarge. It should make you guys a great shop with plenty of room. Glad to see you getting set back up.....

LockDoc

Liz 07-10-2020 11:49 PM

Re: The new Ole Sarge Customs shop
 
That is a great space. I know you are happy

skymangs 07-11-2020 09:19 AM

Re: The new Ole Sarge Customs shop
 
When I say that we have "closed”, we merely went from being a business to an active hobby until such time as we can employ a full time work force.

skymangs 07-11-2020 09:26 AM

Re: The new Ole Sarge Customs shop
 
We’re also taking bids to extend the shop another 10', making it 30x80. Moving that useless side door to the front and an 8x10 Office just left of the man door.

skymangs 07-15-2020 09:36 AM

Re: The new Ole Sarge Customs shop
 
4 Attachment(s)
The new building is finished, waiting on the overhead doors and gravel.

skymangs 07-17-2020 11:10 AM

Re: The new Ole Sarge Customs shop
 
1 Attachment(s)
Here’s an overall shot of the property.

67C10Step 07-21-2020 10:34 AM

Re: The new Ole Sarge Customs shop
 
A man can never have too much covered space, especially if you are into automobiles.

Looking fantastic.

skymangs 07-22-2020 06:08 PM

Re: The new Ole Sarge Customs shop
 
Right?

skymangs 01-13-2021 11:44 PM

Re: The new Ole Sarge Customs shop
 
1 Attachment(s)
after nearly 6 years of sitting derelict, exposed to the weather. we finally got the old 8N running and transported it to the shop!

skymangs 01-25-2021 09:47 PM

Re: The new Ole Sarge Customs shop
 
4 Attachment(s)
today we built a rack to hold our new steel (my design). not done yet, will finish this week.

skymangs 02-06-2021 11:37 AM

Re: The new Ole Sarge Customs shop
 
4 Attachment(s)
we finally got the steel rack finished yesterday!

Redneck Rydes 02-07-2021 12:08 PM

Re: The new Ole Sarge Customs shop
 
Man that looks great and very handy.

skymangs 02-07-2021 01:32 PM

Re: The new Ole Sarge Customs shop
 
Yeah, way better than a pile in the corner!

72 Super 02-12-2021 11:25 PM

Re: The new Ole Sarge Customs shop
 
Very nice shop.

Ray

skymangs 02-13-2021 12:02 AM

Re: The new Ole Sarge Customs shop
 
Thank you, we are constantly improving it

skymangs 02-19-2021 11:38 PM

Re: The new Ole Sarge Customs shop
 
2 Attachment(s)
we finally managed to close up that hole in the ceiling for the garage door opener, so now we can put blow in insulation up there!

skymangs 02-28-2021 12:47 AM

Re: The new Ole Sarge Customs shop
 
5 Attachment(s)
1. Creating a new 120 gal 5hp compressor
2. Cutting the platform off my current compressor
3. Hanging brooms
4. My Model A wall hanger
5. The 50 Chevy 3100 wall hanger that we are rebuilding from the fire

skymangs 03-01-2021 11:01 PM

Re: The new Ole Sarge Customs shop
 
3 Attachment(s)
Our custom made 120 gallon air tank

skymangs 03-02-2021 11:36 PM

Re: The new Ole Sarge Customs shop
 
1 Attachment(s)
we finally finished painting that wall.

skymangs 03-26-2021 09:45 PM

Re: The new Ole Sarge Customs shop
 
1 Attachment(s)
We finally put that 454 on an engine stand!

skymangs 03-27-2021 10:33 PM

Re: The new Ole Sarge Customs shop
 
5 Attachment(s)
1. we started insulating that main garage door, ran out of styrofoam. Have to pick up some more
2. This was the old lighting, insufficient!
3. This is the new. 12 fixtures of 5K LEDs. Should be good now!
4. We’ve been putting off framing out the breaker box for over a year now
5. Finally got round to it! Overall a productive day!

skymangs 04-05-2021 10:14 PM

Re: The new Ole Sarge Customs shop
 
5 Attachment(s)
All winter I wanted to insulate the ceiling, now finally it’s done! R30 all the way across!

skymangs 04-06-2021 09:29 PM

Re: The new Ole Sarge Customs shop
 
1 Attachment(s)
Our new florescent clock came in

skymangs 04-07-2021 09:22 PM

Re: The new Ole Sarge Customs shop
 
3 Attachment(s)
Finished insulating 3 out of 4 doors and finished insulation and plywood on the entire North wall today.

skymangs 04-09-2021 10:14 PM

Re: The new Ole Sarge Customs shop
 
1 Attachment(s)
We painted that corner today, so now the whole North wall is finished!

skymangs 04-10-2021 10:43 PM

Re: The new Ole Sarge Customs shop
 
4 Attachment(s)
Power ran to the dusk till dawn sensor for the sign

skymangs 04-10-2021 10:46 PM

Re: The new Ole Sarge Customs shop
 
3 Attachment(s)
New exterior sign lights up with green LED "Ole Sarge” and white "customs”
This is how far we got on the west wall today

skymangs 04-15-2021 11:19 AM

Re: The new Ole Sarge Customs shop
 
2 Attachment(s)
We got the west wall done


All times are GMT -4. The time now is 10:47 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
Copyright 1997-2020 67-72chevytrucks.com