The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Pre 1947 Chevrolet & GMC Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=208)
-   -   TX 67-72 Front Crossmember (https://67-72chevytrucks.com/vboard/showthread.php?t=826745)

Thundarr 10-12-2021 04:19 PM

67-72 Front Crossmember
 
I need to find a straight and solid front crossmember. It not the engine & suspension support crossmember. I'm looking for the structural brace forward of that for frame support.

This is my broken and bent one now.
https://i.imgur.com/gajSZ0jm.jpg?1

1rippen6 10-12-2021 08:44 PM

Re: 67-72 Front Crossmember
 
I have one 75 plus shipping, I'll grab you some pictures Thursday if still interested.

1rippen6 10-13-2021 11:03 AM

Re: 67-72 Front Crossmember
 
1 Attachment(s)
Here you go

Thundarr 10-14-2021 03:52 PM

Re: 67-72 Front Crossmember
 
Is the metal is split next to that hole on the bottom or is that something else?

If it's split, where do I send the money?

1rippen6 10-14-2021 05:15 PM

Re: 67-72 Front Crossmember
 
Quote:

Originally Posted by Thundarr (Post 8983903)
Is the metal is split next to that hole on the bottom or is that something else?

If it's split, where do I send the money?

That's a piece of wire tied on there, send me your zip and I can get a shipping quote. Pp works for me if you have that, if not money order works also.

Thundarr 10-15-2021 01:46 PM

Re: 67-72 Front Crossmember
 
Quote:

Originally Posted by 1rippen6 (Post 8983929)
That's a piece of wire tied on there, send me your zip and I can get a shipping quote. Pp works for me if you have that, if not money order works also.

Fantastic!

Zip is 75234.

I'll PM you my full contact info.

special-K 12-13-2021 10:28 AM

Re: 67-72 Front Crossmember
 
That worked out well. Post a WTB for a 67-72 part on the Pre-47 parts board and bingo! :lol: No point in moving now I guess :)

1rippen6 12-15-2021 12:31 AM

Re: 67-72 Front Crossmember
 
Quote:

Originally Posted by special-K (Post 9006653)
That worked out well. Post a WTB for a 67-72 part on the Pre-47 parts board and bingo! :lol: No point in moving now I guess :)

LOL, it just happened to catch my eye on the last post section so I checked it out!

special-K 12-15-2021 06:13 AM

Re: 67-72 Front Crossmember
 
The funny thing is that was the post showing on the main page since 10/15 and it just caught my eye yesterday. Before looking at the post it made me wonder if maybe guys were doing 67-72 truck clips on Advance Designs :lol:

Madkidd007 12-16-2021 10:58 PM

Re: 67-72 Front Crossmember
 
Quote:

Originally Posted by special-K (Post 9007241)
The funny thing is that was the post showing on the main page since 10/15 and it just caught my eye yesterday. Before looking at the post it made me wonder if maybe guys were doing 67-72 truck clips on Advance Designs :lol:

The irony in what you just said, I convinced my dad to use one on his. Doing a cummins swap and needed a good suspension setup that kept it 8 lug. A 5/8 steel plate on each side used as a shim, drill a few holes, put on a rack and pinion and done!!! Frame rails have the same taper front to back just 1.25 narrower is all.

special-K 01-02-2022 08:15 AM

Re: 67-72 Front Crossmember
 
Well there ya go! It really is a thing. I think this is the most interesting, and gainful, thread I had ever seen! Happy New Year! Keep 'em rollin'!


All times are GMT -4. The time now is 07:17 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2022, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com