67-72 cab corner 6x9 speaker brackets
 

I was asked by several to make some 67-72 6x9 speaker brackets, much like the ones I make for the 73-87 line. Well, here they are.

Made of heavy 16 ga steel, laser cut and bent, there brackets fit perfectly into the cab corner and allow you to run some larger, better sounding speakers. These will only work on trucks with relocated gas tanks and jack assemblies. Mounting is easy, with only six holes total to drill. If your truck is currently under construction, you can weld in the bottom mounting brackets, thus requiring two holes only while still allowing easy removal of the brackets if desired. Kit consist of L & R speaker brackets, L & R floor mounting brackets, mounting hardware, and detailed instructions. These come bare steel, and will need typical metal prep and paint prior to installation.

Pictures below are of the prototype test bracket, installed in a junk cab I picked up in order to create these. I just submitted an order for 25 pairs (including three sets with NO holes, for those who want to run component speakers), and should have them in 5-10 business days. I will be able to start shipping them out the following day or two. I am only guaranteeing 25 sets at this time, may do more depending on how these do.

If you would like to pre-order, information is as follows.

Price is $75 shipped to your door anywhere in the lower 48 states, extra anywhere else. I prefer PAYPAL for payment, but I will accept money orders, or cash if picked up in person (will be cheaper as there is no shipping). This is $10 more than the 73-87 brackets, due to the larger size of these, increased packaging and shipping, and additional mounting hardware.

PLEASE reply here AND PM me if you are interested, as I am not on the 67-72 side of the board very much.

15 of sets with holes

9 of sets with NO holes

I have sold over 200 73-87 sets, zero complaints. I am confident you will be pleased with these as well.

Re: 67-72 cab corner 6x9 speaker brackets
 

Last of the pictures

Re: 67-72 cab corner 6x9 speaker brackets
 

Jeff, can you get me a measurement on the farthest point these brackets come out from the door jamb? I'm just trying to see if there is enough room for these with my seats all the way back. Thanks Ryan.

Re: 67-72 cab corner 6x9 speaker brackets
 

Jeff, replied to your Truck Audio post. I am most assuredly in for a set with a PM sent.

Re: 67-72 cab corner 6x9 speaker brackets
 

I'll take a set. Pm coming.
Posted via Mobile Device

Re: 67-72 cab corner 6x9 speaker brackets
 

If you measure straight over from the door jamb to where the inside edge of the bracket sits, it is 4". It doesn't appear to sit out any further than the old gas tank did.

Re: 67-72 cab corner 6x9 speaker brackets
 

18 sets remaining with holes

2 sets remaining with NO holes

Re: 67-72 cab corner 6x9 speaker brackets
 

I will take a set. I have sent a PM.

Re: 67-72 cab corner 6x9 speaker brackets
 

I'll take a set with the holes. I'll send a PM.

Re: 67-72 cab corner 6x9 speaker brackets
 

I'll take a set of no hole,
no paypal, is a u.s. postal m/o ok?

and where to send?
thanks
my b/a 6.5.3's are gonna rock in these

Re: 67-72 cab corner 6x9 speaker brackets
 

MO is fine, PM sent. :)

Re: 67-72 cab corner 6x9 speaker brackets
 

got it (pm)

Re: 67-72 cab corner 6x9 speaker brackets
 

I removed my tank and have my seats as far back as I can go. That's why I was curious. Thanks for the measurement. I will check and let you know soon. Ryan.

Re: 67-72 cab corner 6x9 speaker brackets
 

67-72 with no holes please.

Re: 67-72 cab corner 6x9 speaker brackets
 

Cool idea!

Re: 67-72 cab corner 6x9 speaker brackets
 

nice idea dude.

Re: 67-72 cab corner 6x9 speaker brackets
 

Thanks guys!

Re: 67-72 cab corner 6x9 speaker brackets
 

cool product!

Re: 67-72 cab corner 6x9 speaker brackets
 

Ttt

Re: 67-72 cab corner 6x9 speaker brackets
 

If you do another run, I'd want a set with no holes, please.

Re: 67-72 cab corner 6x9 speaker brackets
 

I too would like a set less holes, pm when and if you make more. Tks

Re: 67-72 cab corner 6x9 speaker brackets
 

Last Paladin and creepdog

If the shop hasn't cut them yet, I will see if I can have them do more with NO holes, and less with them...sound good? I will post back here tomorrow with the update.

Re: 67-72 cab corner 6x9 speaker brackets
 

Sounds good
Posted via Mobile Device

Re: 67-72 cab corner 6x9 speaker brackets
 

Works for me.

Re: 67-72 cab corner 6x9 speaker brackets
 

I'll take a set if u still have any with no holes please

thanks bobby