The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   New to Me 1966 (https://67-72chevytrucks.com/vboard/showthread.php?t=828088)

twoskies 11-23-2021 10:11 PM

New to Me 1966
 
1 Attachment(s)
Hello
ive got a 1972 c10 / lot of work getting to where its at but ok

i just bought a 66 c10 shortbed stepside / going to be a project, lol
man its a different animal

ive got questions
i do not see any heater or controls except for a lever for floor or windshield
no blower speed switch

small back window/ is this common

also i cant find a build sheet anywhere, is there a way to figure factory options from the vin

thanks for any help

AcampoDave 11-23-2021 11:00 PM

Re: New to Me 1966
 
So welcome to our side of the site. Back in the sixties the big back window was an option and it is less common than the small. Many enthusiasts find the bbw to be more desirable but there are also guys like me who just don't like it. The heaters came in a few different styles too and we have an epic thread about them. It's like 9 pages but it is very good. This is it here... https://www.67-72chevytrucks.com/vbo...d.php?t=488618.

Warrens69GMC 11-23-2021 11:26 PM

Re: New to Me 1966
 
Welcome!

jayoldschool 11-24-2021 11:32 AM

Re: New to Me 1966
 
Some of the option packages will be on the trim tag, down in front of the driver's side foot vent. Looking at the truck, it will be pretty base model. No Custom Chrome, Custom Cab, side trim, probably no Custom Comfort. There are all separate numbers on the tag for these equipment groups.

Chevy Fleetside 11-24-2021 11:41 AM

Re: New to Me 1966
 
if the build sheet is still in the truck it will be behind the seat on the drivers side usually

twoskies 11-24-2021 10:05 PM

Re: New to Me 1966
 
Thank You
That's alot of reading, got to page 4, lol
Answers my question though, theres no controls on the dash

Thanks Again

twoskies 11-24-2021 10:08 PM

Re: New to Me 1966
 
Thank,s to everyone

My 72 kinda prepped me for the metal work im going to do, but the other options are totally different

ill check the door tag tomorrow
Going to be fun

Thank,s

twoskies 11-25-2021 05:03 PM

Re: New to Me 1966
 
Posted via Mobile Device

twoskies 11-25-2021 05:04 PM

1 Attachment(s)
Posted via Mobile Device

jayoldschool 11-26-2021 11:00 AM

Re: New to Me 1966
 
There you go. First line is trim options, second is paint colour, also shows the (short) wheelbase.

bigmoe 11-26-2021 01:12 PM

Re: New to Me 1966
 
Sounds like you have a basic recirculating heater. Not the greatest heater but if it's not a daily driver or not driven much in the cold it is a more desirable option because the deluxe heater take up a lot of space under the hood and are ugly (my opinion). If you get rid of the basic heater there is some demand for others that might want it in order to keep their engine compartment cleaner.

twoskies 12-02-2021 11:03 PM

Re: New to Me 1966
 
Got a mini Starter wired up to the block,(checked motor numbers seems to be a 1980-1985 chevy truck 350/4 bolt main, Hei ignition) Had to charge a battery i had for another truck(99 s10,lol)seemed to spin ok without plugs
checked for tdc , was Spot On for the cap ,pointing to number 1 plug
got plugs in, going to try to start over the weekend

Thanks for all the help

Lokin4AReason 12-08-2021 11:30 PM

Re: New to Me 1966
 
Welco e to the party . . .

twoskies 12-09-2021 08:42 AM

Re: New to Me 1966
 
Thank's did get a carb and wires on it, will start, doesnt want to stay running on its own, didnt time it yet, should help
just need it to be able to move on its own power for now

probably go LS and Automatic sometime next year
gotta save up


All times are GMT -4. The time now is 12:47 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com