The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   Restoring Rusty (https://67-72chevytrucks.com/vboard/showthread.php?t=645440)

Gregski 03-08-2016 10:56 PM

Re: Restoring Rusty
 
4 Attachment(s)
alright, what do we get when we knock off the dirt and grime off a part?

that's right - Part Numbers!

Maybe Keith can chime in and decipher these hieroglyphs for us

Gregski 03-08-2016 11:00 PM

Re: Restoring Rusty
 
4 Attachment(s)
you all remember that bubble bath we gave to those parts, well lets see how things turned out

hmm, not too shabby - I declare that Rattle Can Ready!

y5mgisi 03-08-2016 11:13 PM

Re: Restoring Rusty
 
Nice Greg!

68Timber 03-08-2016 11:19 PM

Re: Restoring Rusty
 
Great place to check those numbers and verify what you have is mortec.com - LINK

enaberif 03-08-2016 11:19 PM

Re: Restoring Rusty
 
Quote:

Originally Posted by Gregski (Post 7515188)
alright, what do we get when we knock off the dirt and grime off a part?

that's right - Part Numbers!

Maybe Keith can chime in and decipher these hieroglyphs for us

3970010 is your standard 350 block with .010 amounts of nickel

The last picture on the pad behind the alternator is usually a partial VIN and casting code which will give you the date of when it was made.

Gregski 03-09-2016 10:42 PM

Re: Restoring Rusty
 
4 Attachment(s)
Gentlemen I just realized you have not been properly introduced to my old cylinder heads

so here they are, Passenger side first

if my hazel eyes do not deceive me I believe the part numbers are as follows

4 (no idea what that means)

882

33388? (2 I think)

L 143

and GM TPL 21-4 ? on the exhaust valve

Gregski 03-09-2016 10:46 PM

Re: Restoring Rusty
 
5 Attachment(s)
alright lets see that old stock Passenger cylinder head already

hey they did their job for 41 years, thank you heads

Gregski 03-09-2016 10:47 PM

Re: Restoring Rusty - Cylinder Head
 
3 Attachment(s)
OK, lets see them numbers on the Dirver side Cylinder Head

2

882

333882

L 133

enaberif 03-09-2016 10:50 PM

Re: Restoring Rusty
 
There are two variations of the 882 heads... light and heavy castings. You sir have heavy casting 882s and while they are a crappy smog head they were the best of the two and usually didn't crack in the valve seat like the light castings versions.

Also did you clean those valves off? Because they look like they were either cooking coolant or you cleaned them up.

So Rusty had that going for him.

Gregski 03-09-2016 10:57 PM

Re: Restoring Rusty
 
5 Attachment(s)
and now for the Driver side Cylinder Head

I saw this quote on the InterWeb somewheres about these heads, it made me laugh

"882's are the "Best" of the worst heads."

Gregski 03-09-2016 10:57 PM

Re: Restoring Rusty
 
Quote:

Originally Posted by enaberif (Post 7516475)
there are two variations of the 882 heads... Light and heavy castings. You sir have heavy casting 882s and while they are a crappy smog head they were the best of the two and usually didn't crack in the valve seat like the light castings versions.

Also did you clean those valves off? Because they look like they were either cooking coolant or you cleaned them up.

So rusty had that going for him.

saweet !!!

Gregski 03-09-2016 11:01 PM

Re: Restoring Rusty
 
4 Attachment(s)
couple more things we learned from the autopsy

first the intake manifold was excellent very nice and thick part number 1256 I believe

however the head gaskets although metal, were paper thin, you can see where one failed around cylinder #1 or was close to failing

examining the heads closer there indeed was a bit of milky substance around cylinder #1, I said a little bit, ha ha

hey that's why we do what we do, know what I'm a sayin'?

enaberif 03-09-2016 11:06 PM

Re: Restoring Rusty
 
Those head gaskets are absolutely shot and were leaking. Stock OEM gaskets were metal shims that measured in around if I remember 0.010 thick so they seem extremely thin!

Gregski 03-09-2016 11:09 PM

Re: Restoring Rusty
 
5 Attachment(s)
years ago my buddy "Harley" Bill, picture a 6' 8" skinny Colonel Sanders from Tennessee showed me how to do a valve leak test on my '83 Shovelhead (that be a Harley Davidson for the uninitiated) using gasoline

now you could do this using water, but water molecules be bigger than gasoline, so you may need to leave the liquid in the chambers longer while you have dinner, or even overnight, where as gasoline, gives you an almost immediate feedback

so we fill the spark plug holes with [ahem] spark plugs, and flip them rascals upside down, and level them with a socket of approximate height

I like to put clean cardboard or a paper grocery bag underneath for better visability of any dripage or leakage

as you can see our old heads looked tight, if there was a problem with a valve sealing you would know right quick

Gregski 03-09-2016 11:13 PM

Re: Restoring Rusty
 
5 Attachment(s)
that's what I'm talkin' about, parts, parts, parts

20 New Old Stock push rods showed up, GM part number 14095256 cost $147.56, with just the right amount of surface rust, ha ha, but hey that's why they sell steel wool right? Yes I did say 20, I had to buy one lot of 8 and one of 12, oh well we got extras.

also got me some of them nice orange GM valve cover gaskets, GM part number 10046089 score for $26.56

daddyjeep 03-09-2016 11:16 PM

Re: Restoring Rusty
 
That cleaned up real nice. Good work Greg.

Gregski 03-09-2016 11:19 PM

Re: Restoring Rusty
 
2 Attachment(s)
Christmas in March! Nice, more parts

27 hydraulic lifters showed up GM part number 5232720, also New Old Stock off of eBay, yes we got extras.

Cost $95.00

Gregski 03-09-2016 11:19 PM

Re: Restoring Rusty
 
Quote:

Originally Posted by daddyjeep (Post 7516540)
That cleaned up real nice. Good work Greg.

Thank you bud, TON OF WORK!

Fun Level = 2

Gregski 03-09-2016 11:31 PM

Re: Restoring Rusty
 
5 Attachment(s)
Truckaholics

I must tell you that I have been stock piling some parts over the last few months that I intentionally did not share with you all since I was not ready to work on them, but now it is time, so here is the Vortec Dual Plane Intake Manifold GM part number 12464340 I bought on eBay for $127.50, but the extra $40 for shipping stung a little, so total $167.50

Gregski 03-09-2016 11:41 PM

Re: Restoring Rusty - Vortec Cylinder Heads
 
5 Attachment(s)
Here are the gorgeous Vortec iron heads GM part number 12558062 I scored from the junk yard for a total of $88.00 yes that was for the pair of them. I think it was 50% OFF all engine parts that weekend at the local Pick N Pull. But I did have to go to four yards to finally find a set on the last vehicle I looked at, a 1999 Suburban, and I almost died of heat stroke that day. Things I do for you guys! JK

~ Hey me, it's me from the future, it's two years later (9/22/2018) and I gotta tell you these heads did not turn out, they were both cracked, warning to all you ambitious junk yard pullers out there, I do not recommend hunting for used Vortec cylinder heads, I pulled 5 pairs, and all were cracked! ~

Gregski 03-09-2016 11:43 PM

Re: Restoring Rusty
 
3 Attachment(s)
more shots of the Vortec cylinder heads

Gregski 03-09-2016 11:45 PM

Re: Restoring Rusty
 
3 Attachment(s)
alright Greg, I think we get what cylinder heads look like, ha ha

Gregski 03-09-2016 11:46 PM

Re: Restoring Rusty
 
4 Attachment(s)
dude seriously? more pics of these stupid heads

I also took the Head Bolts since I did not know if they were going to be different kind then my old ones, I had to pay for these, they charged me $5.00 bucks total for all of them

I realize you are supposed to use new head bolts as they supposedly stretch, but hey this is a budget build, and I aint made of money, so I hope to clean these up real good and use new goop of some kind on them

Gregski 03-09-2016 11:51 PM

Re: Restoring Rusty - Vortec Valve Covers
 
2 Attachment(s)
I also took the valve covers GM part number 12355350 off of the same vehicle since the Vortec heads use center bolt valve covers not the old style with bolts around the edges, and yes I also took the valve cover bolts, I showed them to the guy and he said I could just take em fer FREE (hey man, this stuff adds up real quick)

cost $21.00

other than the 5 foot filler neck on one of them I think they might could work out

shoot, I think you saw these when I showed you the bath of parts, oh well

Jeramy 03-10-2016 12:04 AM

Re: Restoring Rusty
 
if you unscrew the 5 foot filler the cap should screw right in to the cover

Gregski 03-10-2016 12:15 AM

Re: Restoring Rusty
 
Quote:

Originally Posted by Jeramy (Post 7516640)
if you unscrew the 5 foot filler the cap should screw right in to the cover

Jeremy that is music to my ears, I can't wait to try it!!! thank you bud this is the type of great help I have grown accustomed to on this here forum, great group of guys (n gals)

enaberif 03-10-2016 12:28 AM

Re: Restoring Rusty
 
Quote:

Originally Posted by Gregski (Post 7516658)
Jeremy that is music to my ears, I can't wait to try it!!! thank you bud this is the type of great help I have grown accustomed to on this here forum, great group of guys (n gals)

That long tube is so that you don't spill oil all over your valve covers lol.

Gregski 03-10-2016 08:22 PM

Re: Restoring Rusty - New Water Pump
 
4 Attachment(s)
time to think outside the box

ah si, pompa de agua esta aqui

strictly optional and won't count against our top end upgrade bottom line, but I must say I bought this $111.00 dollar GM part number 88894341 water pump for $44.99 on eBay with FREE shipping. It is a ZZ4 engine take off, and has never seen water, happy dayz

Gregski 03-10-2016 08:26 PM

Re: Restoring Rusty
 
5 Attachment(s)
speaking of those Vortec cylinder heads, we subject them to the same precision leaky valve testing as the old ones, we do not discriminate people, I don't care what your chamber size or shape is - I'm looking at you Hemi

and I'm pleased to report these were air [ahem] gas tight

Gregski 03-10-2016 08:30 PM

Re: Restoring Rusty
 
4 Attachment(s)
then it was time to show 'em some Wire Wheel Love - WWL

Gregski 03-10-2016 08:31 PM

Re: Restoring Rusty
 
3 Attachment(s)
one side done, on to the other side

I think it turned out great, check out the difference

Jake Wade 03-10-2016 08:37 PM

Re: Restoring Rusty
 
Gregski, you have done well saving money by finding some truly great deals for your budget build but, I gotta ask, why did you pay so much for pushrods?

You could have saved over $100 for an example similar to this:

http://www.summitracing.com/parts/hrs-95205/overview/

They are nice pieces for the money and plenty durable for your application.

enaberif 03-10-2016 08:38 PM

Re: Restoring Rusty
 
I hope you plan to port match the heads and intake :P Go big or go home sir.

hatzie 03-10-2016 08:57 PM

Re: Restoring Rusty
 
Quote:

Originally Posted by Gregski (Post 7516610)
dude seriously? more pics of these stupid heads

I also took the Head Bolts since I did not know if they were going to be different kind then my old ones, I had to pay for these, they charged me $5.00 bucks total for all of them

I realize you are supposed to use new head bolts as they supposedly stretch, but hey this is a budget build, and I aint made of money, so I hope to clean these up real good and use new goop of some kind on them

I would not re-use Vortec cylinder head bolts. According to the `99 FSM they have a torque sequence and then you need to do a final angle in degrees using a torque angle tool. That usually means they are Torque-To-Yield.
If you re-use TTY bolts you'll end up with broken head bolts and/or leaking head gaskets just like the 1970's & 1980's Oldsmobile and VW Diesels.

The damper is probably OK but if the ring looks cracked or pushed unevenly out of the slot you need to replace it. I replaced the dampers on my Diesels with Fluidampers but smallblocks dont beat the snot out of a damper like the 6.xL AMG engines.

Gregski 03-10-2016 09:07 PM

Re: Restoring Rusty
 
Quote:

Originally Posted by Jake Wade (Post 7517801)
Gregski, you have done well saving money by finding some truly great deals for your budget build but, I gotta ask, why did you pay so much for pushrods?

You could have saved over $100 for an example similar to this:

http://www.summitracing.com/parts/hrs-95205/overview/

They are nice pieces for the money and plenty durable for your application.

The Greg is following the Chevrolet Performance 350 HO Engine 19210007 specs shared earlier to the T, once I deviate on push rods I am going to deviate on lifters, than cam, and then I will be lost.

Gregski 03-10-2016 09:08 PM

Re: Restoring Rusty
 
Quote:

Originally Posted by enaberif (Post 7517804)
I hope you plan to port match the heads and intake :P Go big or go home sir.

I am home, and I am broke, LOL

enaberif 03-10-2016 09:44 PM

Re: Restoring Rusty
 
Quote:

Originally Posted by Gregski (Post 7517850)
I am home, and I am broke, LOL

It just takes a small dremel bit to do it lol. I'm sure you can afford that

rusty76 03-10-2016 10:01 PM

Re: Restoring Rusty
 
Go Greg go!

Gregski 03-10-2016 11:44 PM

Re: Restoring Rusty - Valve Spring Remover
 
3 Attachment(s)
for the life of me I don't remember what I did with my valve spring remover, I know I had one, so off to Harbor Freight we went, I don't know about your but I struggle with buying expensive single purpose tools, so $13 bucks plus the 20% off coupon you find in every car rag

so little about this tool, out of the box it sucks, it is very consistent in slipping off the springs in its current configuration, so step 1 is to modify it, you kneed to curl up or in the jaws that grab the spring, in my case I used a hammer to bend them in a little bit

buttom pic is before modification, you can see the straight claws and how easily they would slip out

Gregski 03-10-2016 11:50 PM

Re: Restoring Rusty
 
2 Attachment(s)
well it was raining out, poring actually so as much as I wanted to take the heads outside to play with them, I couldn't, but I had to do something, you know the feeling

so it was time to test drive that brand new shinny valve spring compressor remover thingie

first I show you how bad it sucked no matter what I did in its virgin form


All times are GMT -4. The time now is 03:45 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com