The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   Restoring Rusty (https://67-72chevytrucks.com/vboard/showthread.php?t=645440)

Gregski 10-02-2016 03:08 AM

Re: Restoring Rusty
 
5 Attachment(s)
and all the pistons out of the passenger side as well, and numbered

I realize I'm stamping them on the bottom part that comes off but I don't plan on having more than one apart at a time

Gregski 10-02-2016 03:10 AM

Re: Restoring Rusty
 
1 Attachment(s)
tried to take a picture of the part number on one of the pistons, 6271096 I think it was so stock size 4"

Gregski 10-02-2016 03:11 AM

Re: Restoring Rusty
 
2 Attachment(s)
then it was time for a Dingleberry hone job with the engine in the car

used trans fluid as a lubricator

Gregski 10-02-2016 03:13 AM

Re: Restoring Rusty
 
3 Attachment(s)
made this metal shield to protect the crank from the stones of death

Gregski 10-02-2016 03:15 AM

Re: Restoring Rusty
 
2 Attachment(s)
I took care to cover things up and tried my best to prevent debry from falling in where it don't belong

Gregski 10-02-2016 03:17 AM

Re: Restoring Rusty
 
2 Attachment(s)
before and after honing pics

the mirror like finish is actually what you don't want when putting in new rings, you want it to be dull(ish) like the second pic

Gregski 10-02-2016 03:19 AM

Re: Restoring Rusty
 
2 Attachment(s)
just a look at another cylinder, before and after

Gregski 10-02-2016 03:21 AM

Re: Restoring Rusty
 
1 Attachment(s)
this is the shield / crank guard at work

Gregski 10-02-2016 03:23 AM

Re: Restoring Rusty
 
2 Attachment(s)
yes I did get a ton done in one day, I wrapped things up late at night by de-ringing the pistons, and oh boy did I find two problems

but first the good side, the passenger side, all de-ringed

Gregski 10-02-2016 03:26 AM

Re: Restoring Rusty
 
2 Attachment(s)
things got a bit more interesting on the driver's side

two oil rings were broken, can you guess which two? remember the two middle chambers in that head

#3

#5

Gregski 10-02-2016 03:28 AM

Re: Restoring Rusty
 
3 Attachment(s)
no gentlemen I did not brake them whilst removing them off the piston, they were broken already that's why they would not spin at all

here's a closer look at #3 oil ring snapped in two

Gregski 10-02-2016 03:31 AM

Re: Restoring Rusty
 
3 Attachment(s)
and here is the broken oil ring of #5, this one broke into three pieces, a tiny small one if you look closely

I think we found our problem(s) folks!

so lots and lots of work today, I can't believe I tore it all apart in one day so quickly like that, and I hope to put it all back together tomorrow

can I do it? stay tuned...

rusty76 10-02-2016 09:41 AM

Re: Restoring Rusty
 
Oh me. You're elbow deep now.

RDrancher 10-02-2016 09:44 AM

Re: Restoring Rusty
 
Dude, your energy amazes me. You get more accomplished on your rig in one day then I have on mine in the last two years. Thumbsup man!

Gregski 10-02-2016 09:50 AM

Re: Restoring Rusty
 
Quote:

Originally Posted by RDrancher (Post 7730624)
Dude, your energy amazes me. You get more accomplished on your rig in one day then I have on mine in the last two years. Thumbsup man!

LoL thanks bro, did I mention the wife was out of town, hee hee 🤓

rgunlock 10-02-2016 11:18 AM

Re: Restoring Rusty
 
Wow - impressive amount of progress. Waiting to see the plan to address this. Better set of rings? Something you can do to keep the next set from breaking... Good luck getting it all back together today!

Gregski 10-02-2016 11:38 AM

Re: Restoring Rusty
 
Quote:

Originally Posted by rgunlock (Post 7730675)
Wow - impressive amount of progress. Waiting to see the plan to address this. Better set of rings? Something you can do to keep the next set from breaking... Good luck getting it all back together today!

Just scored some Sealed Power (aka Federal Mogul) E251X cast iron rings for $46.84 at O'Really's. They wouldn't quite match Summit's price of $30.97 but gave them to me for $42.99 plus tax, so I am very happy.

The guy used to own a machine shop and said they seal better in less than perfect conditions such as mine.

Summit description reads: "These OE-quality Sealed Power cast piston rings are made from ductile iron and are specifically designed for stock rebuilds."

and they were made in the U.S.A. - Bonus!

Gregski 10-02-2016 02:50 PM

Re: Restoring Rusty
 
3 Attachment(s)
well after cooking the kids breakfast (yes I took them to IHOP - shhhh, don't tell the wife) I had an hour this morning to prep the block for the pistons, ie scrape the old gaskets off

Fun Level: -2

harley87ta 10-02-2016 03:41 PM

Re: Restoring Rusty
 
That coolant you found... Is the block cracked?

Tiger Joe 10-02-2016 04:03 PM

Re: Restoring Rusty
 
First pic in post 4767

1- looks like you need to cut the ridge off the top of the cylinders
2- is that a mark on the crankshaft journal? What do the bearings look like

Gregski 10-02-2016 04:19 PM

Re: Restoring Rusty
 
Quote:

Originally Posted by harley87ta (Post 7730871)
That coolant you found... Is the block cracked?

shhhh don't even say that, ha ha

that's a mystery I have not cracked yet, pun intended

Gregski 10-02-2016 04:20 PM

Re: Restoring Rusty
 
1 Attachment(s)
a que tip, seriously? is this guy really that anal

um, have you meet The Greg!

Gregski 10-02-2016 04:21 PM

Re: Restoring Rusty
 
1 Attachment(s)
and the block all squeaky clean and Piston Ready

Gregski 10-02-2016 04:23 PM

Re: Restoring Rusty
 
Quote:

Originally Posted by Tiger Joe (Post 7730884)
First pic in post 4767

1- looks like you need to cut the ridge off the top of the cylinders
2- is that a mark on the crankshaft journal? What do the bearings look like

I will have to take another look at the crank, when I examined it the first time, it looked good, bearings had normal wear, but I bought brand new ones anyway

SkinnyG 10-02-2016 04:34 PM

Re: Restoring Rusty
 
If you could get the pistons out fairly easily, you can probably get away without removing the ring ridge. Theoretically, the new rings won't hit the ridge, or be damaged by the ridge. We hope.

I like the flex (ball) hone for finish better than the cylinder hone you used. It will still work either way, as long as the glazing has been removed.

My block had 0.007" taper, and it took a bit of wiggling to get the pistons out. I got half-way through cleaning the pistons (Easy Off over cleaner works great - just don't
let the cleaner linger on the pistons. Soaking in Diesel works well, too), and decided I didn't want to be here again in 5 years, so I had it bored 0.020". And balanced. And with a torque plate. And the cha-ching cha-ching for machining.

Is this the original block?


All times are GMT -4. The time now is 10:00 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com