Misc Parts For Sale From My 67 Chevy Truck
 

I have various parts left over from my build I'm going to start clearing out. All parts listed with price shipped in the US. I accept Paypal or MO. Pictures below. I can provide additional pictures, info, etc on request. PM me if outside of US for shipping options.

67-72 Radiator Core Support Brackets - $15 Shipped
Rear Upper Shock Mounts - $10 Shipped
67-72 Window Handles w/ Black Knobs (3) - $10 Shipped
67-72 Passenger Kick Panel Vent (seal is torn) - $20 Shipped
Antenna Cable - $15 Shipped
SOLD - New Polyurethane Radiator Core Support Mount Bushing Set
SOLD - 67-72 w/o A/C Glove Box
SOLD - Rearview Mirror
SOLD - 67-72 Upper Door Hinges
SOLD - 67-72 Coil Spring Clamps (2)
SOLD - 67-72 Front Bumper Braces

The Pictures:

Radiator Core Support Brackets (Surface rust only - just need cleaned up) - $15 Shipped
http://i219.photobucket.com/albums/c...e/100_1051.jpg

http://i219.photobucket.com/albums/c...e/100_4393.jpg

Re: Misc Parts For Sale From My 67 Chevy Truck
 

Rear Upper Shock Mounts - $10 Shipped
http://i219.photobucket.com/albums/c...e/100_1046.jpg

67-72 Door Lock Set w/ 1 Key - $10 Shipped
http://i219.photobucket.com/albums/c...e/100_1053.jpg

67-72 Window Handles w/ Black Knobs (3) - $10 Shipped
http://i219.photobucket.com/albums/c...e/100_1057.jpg

67-72 Passenger Kick Panel Vent (seal is torn) - $20 Shipped
http://i219.photobucket.com/albums/c...e/100_1058.jpg

Antenna Cable - $15 Shipped
http://i219.photobucket.com/albums/c...e/100_1042.jpg
http://i219.photobucket.com/albums/c...e/100_1043.jpg

Re: Misc Parts For Sale From My 67 Chevy Truck
 

Core support bushings should work for a 69? Any difference anyone knows of? I will take them if they work for my application. Eric

Re: Misc Parts For Sale From My 67 Chevy Truck
 

According to LMC Truck and Classic Parts, they both indicate the same kit for 67-72 Chevy and GMC Trucks. Let me know what you decide to do. Thanks!

Eric

Re: Misc Parts For Sale From My 67 Chevy Truck
 

Lots still left.

Re: Misc Parts For Sale From My 67 Chevy Truck
 

Do you have a cig liter set up I need to install one in my truck ship to 92648

Re: Misc Parts For Sale From My 67 Chevy Truck
 

Hey paul mora, right now I only have what I've posted available to offer. I haven't went through all my parts bins yet, so its possible there's one I won't be using in there somewhere, but it may be a bit yet before I find out. I will definitely contact you if I find one within a reasonable amount of time. Right now, I'm just trying to stay organized on what I offer based on what I've taken photos of and dug out of my parts bins.

Re: Misc Parts For Sale From My 67 Chevy Truck
 

I'll take the mirror, let me know how you want to be paid

Re: Misc Parts For Sale From My 67 Chevy Truck
 

Someone posted one today and I just bougght it

Thank for trying

Re: Misc Parts For Sale From My 67 Chevy Truck
 

Will send you a PM with pymt option details. Thanks!

Re: Misc Parts For Sale From My 67 Chevy Truck
 

Updated list bump

Re: Misc Parts For Sale From My 67 Chevy Truck
 

Friday Bump

Re: Misc Parts For Sale From My 67 Chevy Truck
 

Do you know if the upper shock mounts will work for 1/2 ton leafspring (that is what I need)......how does it attach to the chassis? Are those rivets that have to be drilled out to bolt through? Thanks

Re: Misc Parts For Sale From My 67 Chevy Truck
 

Hey, IndyRich. I'll do my best to try to help you, but not too familiar with what all changes in the rear when you go to leaf springs. May be someone else on here will read this and be able to confirm for us, but I will post a couple pics that may help you determine better if it is way different for the shock mounts or the same. On a coil spring truck, there is a brace that runs from frame rail to frame rail. In the attached pictures, it has the rubber hose laying over the top of it. Underneath that brace, these stock mounts are riveted on from the factory, set at a little bit of an angle. When you switch to an Early Classic drop kit, it comes with new upper shock mounts that are shorter, to allow for the reduced travel between the rails and the axle. You have to drill out the rivets in the stock brace. In the first picture, you can see the new bolts and nuts on the front of that brace. The second picture shows the bolts on the back of the brace along with the driver's side replacement upper shock mount bracket.

If you have that same brace running from rail to rail slightly in front of the rear axle, then I would assume leafspring trucks probably have the same setup for shock mounts. In order to mount these on your truck (assuming you have the same mounting location), you would need to finish drilling or grinding off the swollen part of the rivet still inside the shock mount. Then you would need to find 4 bolts the size of the holes in the brace and mounts. I could get the measurements of mine this week if that would help. The truck isn't here right now as it is in paint, but I plan to go by there this week.

Let me know! Thanks!

http://i219.photobucket.com/albums/c...s/100_0472.jpg

http://i219.photobucket.com/albums/c...s/100_0475.jpg

Re: Misc Parts For Sale From My 67 Chevy Truck
 

Hi,
If still available, I'll take the glove box, upper door hinges and the radio antenna wire. All items shipped together should cut the shipping cost. Shipping to NC 27028. Pls pm me your paypal info.
Thanks

Re: Misc Parts For Sale From My 67 Chevy Truck
 

What capacity is the rear mounted gas tank? Is it new and what is it out of ? it looks pretty neat.

Re: Misc Parts For Sale From My 67 Chevy Truck
 

PM sent. I believe the tank I am using holds 16 gallons and it is from a 49-52 Chevrolet car.

Re: Misc Parts For Sale From My 67 Chevy Truck
 

I'll take the front bumper supports. Can you send me a PM so we can make the arrangments. Thanks.

Re: Misc Parts For Sale From My 67 Chevy Truck
 

PM sent.

Re: Misc Parts For Sale From My 67 Chevy Truck
 

What's the story with the 383, home built? crate? mileage?

Eric

Re: Misc Parts For Sale From My 67 Chevy Truck
 

Hey there. Just had it built by an engine shop up in Missouri so no miles on it yet. Still waiting on the truck to be painted. It has a pretty aggressive cam too so should sound pretty good (sorry don't know all the details).

Using this as a bump as well. Parts still available as listed. Remember that price includes shipping.

Re: Misc Parts For Sale From My 67 Chevy Truck
 

Sounds good, I want to get a 383 for my '71 blazer just don't have the $$ yet. Good luck with it.

Re: Misc Parts For Sale From My 67 Chevy Truck
 

I need the front bumper mounts how much shipped to 72150 ?

Re: Misc Parts For Sale From My 67 Chevy Truck
 

Hey C10 Friend, I've been attempting to contact you via PM and personal email but I have not heard back from you. If you still want these, you have 12 hrs to respond otherwise they are going to the next inquirer.

Re: Misc Parts For Sale From My 67 Chevy Truck
 

Hey there follow Arkansan. The price you see is shipped to your door ($10). I've got to give the other guy one last chance that said he wanted them and if he does not respond, they will be yours. I'll send you my paypal info via PM in the morn if he does not respond.