Pole Frame Garage
4 Attachment(s)
This garage is long overdue, but it is finally on its way. I really liked the steel frame that Jimmy built, but I wasn't confident enough that I had the time or the patience to construct it. This will be a 40x60x12.5 and the plan is to have it spray foam insulated. These pictures are from Day 1 (except the excavating, that was July). The boys saw them pulling in and begged me to let them stay home from school and watch. I figured they might learn some worthwhile skills by watching the Amish, rather than sitting in class wearing a face mask with a plexiglass cage around their desk and playing by themselves at recess. That's just me venting a little, i know teachers are important people in children's lives. It's the current conditions we are living in that frustrate me. Enough of that, on to the pictures. You can't see much from the side view, i just added that since the sunset was nice tonight. Crazy weather here in PA. Usually at this time I'm doing all i can to not turn the heat on until November 1st, but yesterday i put the AC on - 80 degrees and humid like it's August. Oh, and the kids also found the missing guinea - she came back with 15 keats.
Jimmy's Garage Link - http://67-72chevytrucks.com/vboard/s...d.php?t=801075 |
Re: Pole Frame Garage
There is a 10' lean-to on the left side. I can already notice that i should have made that 16'. There are going to be four 10' wide doors across the front, evenly spaced. I opted for no glass in the overhead doors. I figured it could be a problem when i didn't want the sun glaring in. However, i do like the idea of being able to look out the front, which faces my driveway which is 460'. I was considering a man door between overhead door #2 and #3. Thoughts on this? Probably wouldn't look the best, but for functionality i think it would be nice. The other man door will be on the left side towards the front.
|
Re: Pole Frame Garage
Good to see a shop going up at your place. I have been using the door under the lean to to go in and out. I think you will be fine with the door in the front. What are your plans for the ceiling? Finished and painted white will brighten up the inside a lot.
Jimmy |
Re: Pole Frame Garage
Most likely the ceiling and interior walls will be white metal. Still have to figure out the lighting and plumbing. I’ll need a sewage ejector pump to tie into the house.
|
Re: Pole Frame Garage
Having a bathroom would be nice. These are the lights I am looking at to ad to my shop.
https://www.amazon.com/Fixture-Integ...dDbGljaz10cnVl Jimmy |
Re: Pole Frame Garage
Quote:
|
Re: Pole Frame Garage
Fantastic. I put LED's in my 30x40 when I put it up years ago. They are so much better now I am considering adding in a few of the newer ones to brighten it up. It's pretty good but not as bright as I would like in a few spots.
|
Re: Pole Frame Garage
1 Attachment(s)
Day 3
|
Re: Pole Frame Garage
I also put those lights in my garage and boathouse. As some of the reviewers noted, their mounts are nothing to brag about but I just put some tie wraps around them. The lights themselves are amazing. Been running them about 2 years now. No issues
|
Re: Pole Frame Garage
Really looking good.
Jimmy |
Re: Pole Frame Garage
2 Attachment(s)
Day 4
Bud's impressed with the stones. Hope he likes the concrete. |
Re: Pole Frame Garage
Great back scratching material
|
Re: Pole Frame Garage
2 Attachment(s)
The plumbing and electric is laid from the house to the garage.
|
Re: Pole Frame Garage
Curious, it looks like you live in the country. Am I right to assume you have a septic system? If so, how difficult was it for the contractor to tap into it? If you don't have a septic system then disregard this question. Thanks.
|
Re: Pole Frame Garage
Given any thoughts to pulling a Cat5e or fiber cable to provide Internet network connection between house and shop? I know a lot of folks use phones for primary Internet but a cable would allow shop security cameras to save images to a drive in the house.
|
Re: Pole Frame Garage
Quote:
|
Re: Pole Frame Garage
Quote:
|
Re: Pole Frame Garage
Got the lights for my shop and they work really good. Go three up on the wall about 9 feet up to get rid of the shadows and provide light from other than straight down. For the price they are hard to beat. How much have yo got done?
Jimmy |
Re: Pole Frame Garage
Concrete went in yesterday. Do you feel those lights would be sufficient at 12’ height?
|
Re: Pole Frame Garage
I'll post some pictures. With my high ceilings the combination of the UFO and the new leds work well. For the height you have I think the 8 foot leds may work really good. For the money I would order a box of 10 and do some testing. You can hook up to three together.
Jimmy |
Re: Pole Frame Garage
What size are the posts? That is going to be awesome!
|
Re: Pole Frame Garage
1 Attachment(s)
The Amish finished a few weeks ago. The garage took a back seat until I finish two bedrooms we remodeled for the boys. Hoping to get on the ceiling liner next week. The walls are getting foamed tomorrow. I'm still undecided on the ceiling insulation. I'm thinking about trying this https://www.insulation4less.com/insu...l-48-inch.aspx
the Posts are 4x6 glulam |
Re: Pole Frame Garage
1 Attachment(s)
I picked up this drywall lift to assist with the ceiling liner. It's a big help if you're working alone or only have one helper. The sheets are about 20'
|
Re: Pole Frame Garage
I have seen that insulation in places but don't have any experience on how well it works. For the cost of that stuff you may be able to get your insulation contractor to put R30 above your sheeting.
Jimmy |
Re: Pole Frame Garage
Quote:
|
Re: Pole Frame Garage
1 Attachment(s)
Foam is in. Thinking about this heater in a 100k or 125K. https://www.modinehvac.com/products/...wer-vented-hd/
I have 16 four foot led's ordered. I'm also using 6 UFO's - 3 on each side of the lift bay. https://www.e-conolight.com/c-lite-l...-foot-38w.html https://www.e-conolight.com/led-roun...reflector.html |
Re: Pole Frame Garage
WOW! I'm really jealous! That is an amazing building! It's coming together really nicely! That foam insulation is really nice. This will make for a very cool work area!
|
Re: Pole Frame Garage
That foam looks great! How does it compare with fiberglass batts on price? R-value etc.
Are you planning to line the interior? The reason I ask is my 48 x 60 is going up next week. Greg |
Re: Pole Frame Garage
Quote:
|
Re: Pole Frame Garage
Looking good, I used 2 bats of R 19 side by side for ceiling. Don't know if it's the most effective. Because we get a lot of wind I used foam blocks to seal the ends at the top of the walls.
|
Re: Pole Frame Garage
Quote:
|
Re: Pole Frame Garage
Dow...1" blue foam, cut with knife or table saw ( table saw tends to grab...be careful ) filling in between, cut a couple samples and fit......go higher than insulation, but allow air flow over the top from eves...sofit. wedge fit and caulk in place, over top of wall close to outside edge.....2" pink foam might be better on yours with longer pieces
|
Re: Pole Frame Garage
Black Friday sale Walmart had 4ft led shop lights for $10..5000 lumes....not as neat a profile as the 1's you had listed, decent lights, very bright.
|
Re: Pole Frame Garage
Quote:
|
Re: Pole Frame Garage
Quote:
How will you wire you're sidewalls? Thanks for all the pics. |
Re: Pole Frame Garage
thinking about these to keep the vent and close off the soffit. https://www.homedepot.com/p/Owens-Co...70RM/204848302
I will run wire in the wall and put a 3/4" hole in the inside metal and use a plastic grommet to feed the wire through inside panel. My boxes will be surface mounted using the top holes in the box to fasten through the metal and to the purlins. I thought about running a 1 1/4" pvc trunk line on the surface and dropping out of T's where i want receptacles, but i don't want to see all that PVC. I will also run a 2'PVC from the panel up the inside wall to the attic for future wire runs if needed that way i can drop the romex through the conduit and not need to take off metal panels. The ceiling will have 2-50' retractable receptacles and air lines. I'll also pull a piece of 14/3 romex from the house to turn the pole barn exterior lights on from my attached garage. |
Re: Pole Frame Garage
Quote:
|
Re: Pole Frame Garage
4 Attachment(s)
Irrelevant to the garage, but super proud.
|
Re: Pole Frame Garage
Great that you are getting you're kids into shooting and hunting sports!
A passion that can serve them for a lifetime. |
Re: Pole Frame Garage
Quote:
|
All times are GMT -4. The time now is 11:55 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com