|
The new Ole Sarge Customs shop
4 Attachment(s)
The building is 70x30. Uninsulated, no power. There is a dividing wall providing a 40 ft (with a ceiling),and a 30ft unfinished side.
|
Re: The new Ole Sarge Customs shop
3 Attachment(s)
This is the inside
|
Re: The new Ole Sarge Customs shop
4 Attachment(s)
I immediately commissioned a friend to wire the shop. As a shop. 200 Amp main with 4 dedicated 220V circuits, 1 20 amp breaker for each wall, 15 amp for lights only.
|
Re: The new Ole Sarge Customs shop
2 Attachment(s)
I also had him install garage door openers on every door, and motion detector LEDs outside
|
Re: The new Ole Sarge Customs shop
3 Attachment(s)
Next we found a working 1946 Philco refrigerator, and I knew it was perfect for the shop!
|
Re: The new Ole Sarge Customs shop
5 Attachment(s)
Then a good friend of mine started petitioning tool manufacturers and telling them my story. I received several care packages. We also decided that a proper bench should be 16ft, and set about extending it. Alex got a new toolbox too.
|
Re: The new Ole Sarge Customs shop
5 Attachment(s)
Then we began the slow process of insulating and putting up plywood and painting
|
Re: The new Ole Sarge Customs shop
Great work, keep us posted.
|
Re: The new Ole Sarge Customs shop
3 Attachment(s)
we continued putting things behind the bench. A large sign, pegboard, bluetooth surround sound, 40” LCD hooked up to my laptop to display wiring schematics and such.
|
Re: The new Ole Sarge Customs shop
4 Attachment(s)
Here’s the exterior sign my boys are working on. It’ll be on a dusk till dawn sensor. The divider bar in the back has 4' of green LED on top and 4' of white on the bottom.
Oh and it’s 84” x40” |
Re: The new Ole Sarge Customs shop
Quote:
|
Re: The new Ole Sarge Customs shop
5 Attachment(s)
And now I’m having an additional 24x40 building constructed to move some of my cars and open up some bay space. It should be finished on Monday.
|
Re: The new Ole Sarge Customs shop
-
Looks good Sarge. It should make you guys a great shop with plenty of room. Glad to see you getting set back up..... LockDoc |
Re: The new Ole Sarge Customs shop
That is a great space. I know you are happy
|
Re: The new Ole Sarge Customs shop
When I say that we have "closed”, we merely went from being a business to an active hobby until such time as we can employ a full time work force.
|
Re: The new Ole Sarge Customs shop
We’re also taking bids to extend the shop another 10', making it 30x80. Moving that useless side door to the front and an 8x10 Office just left of the man door.
|
Re: The new Ole Sarge Customs shop
4 Attachment(s)
The new building is finished, waiting on the overhead doors and gravel.
|
Re: The new Ole Sarge Customs shop
1 Attachment(s)
Here’s an overall shot of the property.
|
Re: The new Ole Sarge Customs shop
A man can never have too much covered space, especially if you are into automobiles.
Looking fantastic. |
Re: The new Ole Sarge Customs shop
Right?
|
Re: The new Ole Sarge Customs shop
1 Attachment(s)
after nearly 6 years of sitting derelict, exposed to the weather. we finally got the old 8N running and transported it to the shop!
|
Re: The new Ole Sarge Customs shop
4 Attachment(s)
today we built a rack to hold our new steel (my design). not done yet, will finish this week.
|
Re: The new Ole Sarge Customs shop
4 Attachment(s)
we finally got the steel rack finished yesterday!
|
Re: The new Ole Sarge Customs shop
Man that looks great and very handy.
|
Re: The new Ole Sarge Customs shop
Yeah, way better than a pile in the corner!
|
| All times are GMT -4. The time now is 04:47 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com