SBC Exhaust Manifolds (2 Sets) - 4x4 and 1968
I have two sets of exhaust manifolds for sale.
The first set is a sandblasted set of 4x4 exhaust manifolds. The studs look good except for one has broken off, but if I was going to use them, I would replace the studs before installing them since they're already out of the truck. I don't see any rust or serious issues. I'm looking for $100 + shipping and fees, but I'm open to reasonable offers. The second set were on my 1968 GMC C2500's original 327 when I got the truck before I installed some aftermarket cera-coated manifolds. The driver's side appears to be original, but the alternator mounting hole had a bolt snap off in there. I went to the later style alternator mount when I was doing some engine work and didn't need to worry about trying to get the bolt out. The passenger side is an aftermarket manifold. If there's no interest in the set, I don't have a problem tossing the aftermarket manifold into the scrap pile if someone wants to buy the other one, but it's still certainly useable. As with the other set, I don't see any cracks or issues, but I would definitely replace the studs before I installed them on my truck. I'm looking for $35 + shipping and fees, but I'm open to reasonable offers. |
Re: SBC Exhaust Manifolds (2 Sets) - 4x4 and 1968
5 Attachment(s)
Pics of first set
|
Re: SBC Exhaust Manifolds (2 Sets) - 4x4 and 1968
5 Attachment(s)
Pics of second set
|
Re: SBC Exhaust Manifolds (2 Sets) - 4x4 and 1968
Could I get a shipping quote to 46112 for set 1, the 4x4 exhaust manifolds.
|
Re: SBC Exhaust Manifolds (2 Sets) - 4x4 and 1968
Absolutely. I will get back to you tomorrow with some numbers.
Cheers, Nathan. |
Re: SBC Exhaust Manifolds (2 Sets) - 4x4 and 1968
Do you have the tins for heat riser off drivers side ?
|
Re: SBC Exhaust Manifolds (2 Sets) - 4x4 and 1968
Quote:
|
Re: SBC Exhaust Manifolds (2 Sets) - 4x4 and 1968
Quote:
https://67-72chevytrucks.com/vboard/...8&d=1355611311 https://67-72chevytrucks.com/vboard/...ght=heat+riser |
Re: SBC Exhaust Manifolds (2 Sets) - 4x4 and 1968
Quote:
|
Re: SBC Exhaust Manifolds (2 Sets) - 4x4 and 1968
Quote:
|
Re: SBC Exhaust Manifolds (2 Sets) - 4x4 and 1968
Quote:
Thanks, Tim |
Re: SBC Exhaust Manifolds (2 Sets) - 4x4 and 1968
Second set still for sale. I’m willing to split it up since most people probably don’t want the aftermarket manifold.
|
Re: SBC Exhaust Manifolds (2 Sets) - 4x4 and 1968
bump
|
Re: SBC Exhaust Manifolds (2 Sets) - 4x4 and 1968
second set now $35+shipping. I'll give it a week before I toss them in the scrap pile
|
Re: SBC Exhaust Manifolds (2 Sets) - 4x4 and 1968
open to offers, I'd hate to throw the original manifold in the scrap pile
|
Re: SBC Exhaust Manifolds (2 Sets) - 4x4 and 1968
Bump. Open to offers
|
Re: SBC Exhaust Manifolds (2 Sets) - 4x4 and 1968
I will take 2nd set.
I don't use paypal Can send check or money order PM me if this is OK THanks Jeff |
Re: SBC Exhaust Manifolds (2 Sets) - 4x4 and 1968
that’s fine with me. I’m dealing with a family emergency right now, but I will get to you as soon as I can
|
Re: SBC Exhaust Manifolds (2 Sets) - 4x4 and 1968
Quote:
|
Re: SBC Exhaust Manifolds (2 Sets) - 4x4 and 1968
Quote:
|
Re: SBC Exhaust Manifolds (2 Sets) - 4x4 and 1968
Still waiting to hear back. I sent you a PM
|
All times are GMT -4. The time now is 02:41 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com