turn singal switch info need
was wondering if any could tell me how to install a turn signal switch ina 71 c-10 i know its not hard just any help i thank you now
|
Re: turn singal switch info need
1. remove steering wheel with a steering wheel puller
2. unscrew it with a phillips, just 1 screw |
Re: turn singal switch info need
After you remove the steering wheel you have one screw in the turn lever, one in the flasher button, and three in the switch. Unplug wires and feed up through the bowl. GOOD LUCK!!! Gary from Charlotte
|
Re: turn singal switch info need
okay anyone knwo a good place to get a compelete turn switch advance auto wants 27 but the picture on there site dont have the hazard button and i need one of them too http://www.partsamerica.com/ProductD...pe=832&ptset=A
or i can get one from mane truck parts for 34.95 with it what do yal think? http://www.manestruckparts.com/store...&Category_ID=8 |
Re: turn singal switch info need
I got the whole kit from my local Chevy dealer. Don't forget to disconnect battery before removing switch because you have to press the hazard button in to gain clearance in order to angle it up and out.
|
Re: turn singal switch info need
many vendors sell this item...it may still even be available from GM.
A good site to check out is: www.wiringharness.com |
Re: turn singal switch info need
Quote:
|
All times are GMT -4. The time now is 02:05 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com