The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- Engine & Drivetrain (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=24)

- - Pattern check (https://67-72chevytrucks.com/vboard/showthread.php?t=836226)

DLH	07-14-2022 11:26 PM

Pattern check

2 Attachment(s)

I think its close. B/L is .007. Good carrier preload. Coast side looks good to me. What ya think on the drive?
Attachment 2205236

Attachment 2205237

kwmech

07-14-2022 11:52 PM

Re: Pattern check

I would certainly run with that pattern

mongocanfly

07-15-2022 12:10 AM

Re: Pattern check

Yep, what kw said..!!

DLH	07-15-2022 08:05 AM

Re: Pattern check

No AC in the shop, it's been hoooot sitting in the shop pulling and installing that dang carrier. I gave up on it once and drug it to a shop, but they wanted too much to install the gears, gave me so newfound patience. :b69:

MySons68C20

07-15-2022 11:06 AM

Re: Pattern check

I like it, good job!

DLH	07-15-2022 02:25 PM

Re: Pattern check

2 Attachment(s)

Since we all like pictures, a picture of the pinion gear and my cheater setup. I can't lift that thing in and out by hand anymore.

pjmoreland

07-17-2022 09:04 PM

Re: Pattern check

What brand is your gearset? The machining of the teeth looks much cleaner than on a Yukon set I bought recently.

DLH	07-17-2022 09:52 PM

Re: Pattern check

USA standard gear. Came in a yukon gear box.

pjmoreland

07-17-2022 09:54 PM

Re: Pattern check

Quote:

Originally Posted by DLH (Post 9102785)

USA standard gear. Came in a yukon gear box.

Interesting. That is confusing.

pjmoreland

07-17-2022 09:59 PM

Re: Pattern check

1 Attachment(s)

Here's a photo of my Yukon gear. It has burrs, and the machining is generally rough and unrefined looking.

All times are GMT -4. The time now is 05:30 AM.