The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Floor shift conversion (https://67-72chevytrucks.com/vboard/showthread.php?t=820883)

stixnstones

04-18-2021 11:50 PM

Floor shift conversion

I have a 67' C10 250i6 with a 3 on the tree. I would like to convert it to a floor shift. I also have a 4.8L vortec out of a 99'. Which engine would work better for this, and what transmission options would I have? It is currently a long box, and I already have to replace most of the floor. What else does a simpleton like me have to consider?

GASoline71

04-19-2021 12:13 AM

Re: Floor shift conversion

To convert a 3 OTT to 3 on the floor, you need the correct floor shifter with linkage, and then cut a hole in the floor. Fairly simple.

Gary

geezer#99

04-19-2021 12:28 AM

Re: Floor shift conversion

Yup! Simple but only 450 bucks for a shifter and linkages.

All times are GMT -4. The time now is 06:22 AM.